SAE 1016

Alloy Digest ◽  
1976 ◽  
Vol 25 (2) ◽  
Keyword(s):  
Carbon Steel ◽  
Manganese Content ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
High Manganese ◽  
Steel Mills ◽  
Cold Worked ◽  
Hot Rolled ◽  
Good Workability

Abstract SAE 1016 is a low-carbon steel combining good machinability, good workability and good weldability. It is used for components case-hardened by carburizing. It is also used in the hot-rolled, annealed, normalized or cold-worked condition for a variety of construction and engineering applications. SAE 1016 has a relatively high manganese content (0.60-0.90%) for a low-carbon steel; this provides increased hardenability which is reflected in all uses and gives increased hardness and strength in the core of carburized parts and in uncarburized applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-58. Producer or source: Carbon steel mills.

SAE 1522

Alloy Digest ◽  
1981 ◽  
Vol 30 (11) ◽  
Keyword(s):  
Carbon Steel ◽  
Manganese Content ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
High Manganese ◽  
Steel Mills ◽  
Increased Strength ◽  
Hot Rolled ◽  
Good Workability

Abstract SAE 1522 is a low-carbon steel that combines good workability, good machinability and good weldability. It is used in the hot-rolled, annealed, normalized or water-quenched-and-tempered condition for a variety of applications. It also is used for parts case-hardened by carburizing. It has a relatively high manganese content (1.10-1.40%); this provides increased hardenability which is reflected in all uses and gives increased strength and hardness in the core of carburized parts and in sections and components that have not been carburized. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-87. Producer or source: Carbon steel mills.

UNS G10160

Alloy Digest ◽  
1985 ◽  
Vol 34 (8) ◽  
Keyword(s):  
Carbon Steel ◽  
Manganese Content ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Low Carbon ◽  
Steel Mills ◽  
Cold Worked ◽  
Hot Rolled ◽  
Good Workability

Abstract UNS No. G10160 is a carburizing and general-purpose steel. It is a low-carbon steel that combines good machinability, good workability and good weldability. It is used for components case-hardened by carburizing. It is used in the hot-rolled, annealed, normalized or cold-worked condition for a variety of construction and engineering applications. It has a relatively high manganese content (0.60-0.90%) for a low-carbon steel; this provides increased hardenability which is reflected in all uses and gives increased hardness and strength in the core of carburized parts and in uncarburized applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-108. Producer or source: Carbon steel mills.

AISI 1522

Alloy Digest ◽  
1986 ◽  
Vol 35 (2) ◽  
Keyword(s):  
Carbon Steel ◽  
Manganese Content ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
High Manganese ◽  
Steel Mills ◽  
Increased Strength ◽  
Hot Rolled ◽  
Good Workability

Abstract AISI 1522 is a low-carbon steel that combines good workability, good machinability and good weldability. It is used in the hot-rolled, annealed, normalized or water-quenched-and-tempered condition for a variety of applications. It also is used for parts case-hardened by carburizing. It has a relatively high manganese content; this provides increased hardenability which is reflected in all uses and gives increased strength and hardness in the core of carburized parts and in sections and components that have not been carburized. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-111. Producer or source: Carbon steel mills.

AISI 1015

Alloy Digest ◽  
1972 ◽  
Vol 21 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Low Carbon ◽  
Steel Mills ◽  
Cold Worked ◽  
Hot Rolled ◽  
Good Workability

Abstract AISI 1015 is a low-carbon steel used in the annealed, cold-worked, hot-rolled or normalized condition for general purpose construction and engineering. It is also used for case-hardened components. It combines good machinability, good workability and good weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-48. Producer or source: Carbon steel mills.

AISI 1541

Alloy Digest ◽  
1978 ◽  
Vol 27 (9) ◽  
Keyword(s):  
Carbon Steel ◽  
Manganese Content ◽  
Heat Treating ◽  
Medium Carbon Steel ◽  
High Manganese ◽  
Steel Mills ◽  
Cold Worked ◽  
Increased Strength ◽  
Hot Rolled ◽  
Good Workability

Abstract AISI 1541 is a medium-carbon steel containing relatively high manganese (1.35-1.65%). It is characterized by a combination of good machinability and good workability. It may be used in the hot-rolled, annealed, normalized, cold-worked or liquid-quenched-and-tempered condition for numerous applications. Its high manganese content provides increased hardenability which is reflected in increased strength. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-75. Producer or source: Carbon steel mills.

SAE 1015

Alloy Digest ◽  
1988 ◽  
Vol 37 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Low Carbon ◽  
Steel Mills ◽  
Cold Worked ◽  
Hot Rolled ◽  
Good Workability

Abstract SAE 1015 is a low-carbon steel used in the annealed, cold-worked, hot-rolled or normalized condition for general purpose construction and engineering. It is also used for case-hardened components. It combines good machinability, good workability and good weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-119. Producer or source: Carbon steel mills.

UNS G10210

Alloy Digest ◽  
1988 ◽  
Vol 37 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Manganese Content ◽  
Heat Treating ◽  
Carbon Steels ◽  
High Manganese ◽  
Steel Mills ◽  
Cold Worked ◽  
Good Workability ◽  
High Manganese Content

Abstract UNS G10210 is a carbon steel of relatively high manganese content which increases hardenability and hardness over that of carbon steels of lower manganese. It combines good machinability, good workability (hot or cold) and good weldability. It is used in the annealed, hot-worked, normalized, cold-worked or water-quenched-and-tempered condition for many applications. It may be used in uncarburized applications and for components case-hardened by carburizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-122. Producer or source: Carbon steel mills.

AISI 1551

Alloy Digest ◽  
1980 ◽  
Vol 29 (2) ◽  
Keyword(s):  
Carbon Steel ◽  
Heat Treating ◽  
Medium Carbon Steel ◽  
High Manganese ◽  
Hand Tools ◽  
Medium Carbon ◽  
Steel Mills ◽  
Cold Worked ◽  
Hot Rolled ◽  
Good Workability

Abstract AISI 1551 is a medium-carbon steel containing relatively high manganese (0.85-1.15%) for a carbon steel. It can be used in the hot-rolled, annealed, normalized, cold-worked or liquid-quenched-and-tempered condition for numerous applications. It has a combination of good machinability and good workability. Its many uses include hand tools, machinery parts, springs and agricultural machinery. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-80. Producer or source: Carbon steel mills.

AISI 1526

Alloy Digest ◽  
1978 ◽  
Vol 27 (3) ◽  
Keyword(s):  
Carbon Steel ◽  
Manganese Content ◽  
Heat Treating ◽  
High Manganese ◽  
Medium Carbon ◽  
Steel Mills ◽  
Wide Range ◽  
Increased Strength ◽  
Hot Rolled ◽  
Good Workability

Abstract AISI 1526 is a carbon steel containing relatively high manganese (1.10 to 1.40%) and low-to-medium carbon. It combines good machinability, good workability and good weldability. It may be used in hot-rolled, annealed, normalized or liquid quenched-and-tempered condition for a wide range of applications. Also, it may be case hardened by carburizing. Its high manganese content provides increased hardenability which is reflected in all uses and gives increased strength in the core of carburized parts and in uncarburized applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-71. Producer or source: Carbon steel mills.

AISI 1552

Alloy Digest ◽  
1977 ◽  
Vol 26 (8) ◽  
Keyword(s):  
Carbon Steel ◽  
Manganese Content ◽  
Heat Treating ◽  
Medium Carbon Steel ◽  
High Manganese ◽  
Medium Carbon ◽  
Steel Mills ◽  
Cold Worked ◽  
Increased Strength ◽  
Hot Rolled

Abstract AISI 1552 is a medium-carbon steel that may be used in the hot-rolled, annealed, normalized, cold-worked or liquid-quenched-and-tempered condition for a variety of applications. It has a high manganese content (1.20-1.50%) to provide increased hardenability which is reflected in all uses and gives increased strength and hardness in many of its applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-68. Producer or source: Carbon steel mills.

Sign in / Sign up

Export Citation Format

Share Document