SAE 1015

Alloy Digest ◽  
1988 ◽  
Vol 37 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Low Carbon ◽  
Steel Mills ◽  
Cold Worked ◽  
Hot Rolled ◽  
Good Workability

Abstract SAE 1015 is a low-carbon steel used in the annealed, cold-worked, hot-rolled or normalized condition for general purpose construction and engineering. It is also used for case-hardened components. It combines good machinability, good workability and good weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-119. Producer or source: Carbon steel mills.

AISI 1015

Alloy Digest ◽  
1972 ◽  
Vol 21 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Low Carbon ◽  
Steel Mills ◽  
Cold Worked ◽  
Hot Rolled ◽  
Good Workability

Abstract AISI 1015 is a low-carbon steel used in the annealed, cold-worked, hot-rolled or normalized condition for general purpose construction and engineering. It is also used for case-hardened components. It combines good machinability, good workability and good weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-48. Producer or source: Carbon steel mills.

UNS G10160

Alloy Digest ◽  
1985 ◽  
Vol 34 (8) ◽  
Keyword(s):  
Carbon Steel ◽  
Manganese Content ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Low Carbon ◽  
Steel Mills ◽  
Cold Worked ◽  
Hot Rolled ◽  
Good Workability

Abstract UNS No. G10160 is a carburizing and general-purpose steel. It is a low-carbon steel that combines good machinability, good workability and good weldability. It is used for components case-hardened by carburizing. It is used in the hot-rolled, annealed, normalized or cold-worked condition for a variety of construction and engineering applications. It has a relatively high manganese content (0.60-0.90%) for a low-carbon steel; this provides increased hardenability which is reflected in all uses and gives increased hardness and strength in the core of carburized parts and in uncarburized applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-108. Producer or source: Carbon steel mills.

SAE 1016

Alloy Digest ◽  
1976 ◽  
Vol 25 (2) ◽  
Keyword(s):  
Carbon Steel ◽  
Manganese Content ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
High Manganese ◽  
Steel Mills ◽  
Cold Worked ◽  
Hot Rolled ◽  
Good Workability

Abstract SAE 1016 is a low-carbon steel combining good machinability, good workability and good weldability. It is used for components case-hardened by carburizing. It is also used in the hot-rolled, annealed, normalized or cold-worked condition for a variety of construction and engineering applications. SAE 1016 has a relatively high manganese content (0.60-0.90%) for a low-carbon steel; this provides increased hardenability which is reflected in all uses and gives increased hardness and strength in the core of carburized parts and in uncarburized applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-58. Producer or source: Carbon steel mills.

SAE 1020

Alloy Digest ◽  
1987 ◽  
Vol 36 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Mills ◽  
Temperature Performance ◽  
Wide Range ◽  
Cold Worked

Abstract SAE 1020 is a low-carbon steel combining good machinability, workability and weldability. It is carburized for use in case-hardened components and it is used for a wide range of applications in the hot-worked, cold-worked, normalized or quenched-and-tempered conditions. Its many uses include bolts, rods, plate applications, machinery components, case-hardened parts, spinning tools and trimming dies. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: CS-113. Producer or source: Carbon steel mills.

SAE 1522

Alloy Digest ◽  
1981 ◽  
Vol 30 (11) ◽  
Keyword(s):  
Carbon Steel ◽  
Manganese Content ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
High Manganese ◽  
Steel Mills ◽  
Increased Strength ◽  
Hot Rolled ◽  
Good Workability

Abstract SAE 1522 is a low-carbon steel that combines good workability, good machinability and good weldability. It is used in the hot-rolled, annealed, normalized or water-quenched-and-tempered condition for a variety of applications. It also is used for parts case-hardened by carburizing. It has a relatively high manganese content (1.10-1.40%); this provides increased hardenability which is reflected in all uses and gives increased strength and hardness in the core of carburized parts and in sections and components that have not been carburized. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-87. Producer or source: Carbon steel mills.

AISI 1020

Alloy Digest ◽  
1971 ◽  
Vol 20 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Mills ◽  
Wide Range ◽  
Cold Worked

Abstract AISI 1020 is a low carbon steel combining good machinability, workability, and weldability. It is used for case-hardened components and for a wide range of applications in the hot-worked, cold-worked, normalized or quenched-and-tempered conditions. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-39. Producer or source: Carbon and alloy steel mills.

AISI 1522

Alloy Digest ◽  
1986 ◽  
Vol 35 (2) ◽  
Keyword(s):  
Carbon Steel ◽  
Manganese Content ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
High Manganese ◽  
Steel Mills ◽  
Increased Strength ◽  
Hot Rolled ◽  
Good Workability

Abstract AISI 1522 is a low-carbon steel that combines good workability, good machinability and good weldability. It is used in the hot-rolled, annealed, normalized or water-quenched-and-tempered condition for a variety of applications. It also is used for parts case-hardened by carburizing. It has a relatively high manganese content; this provides increased hardenability which is reflected in all uses and gives increased strength and hardness in the core of carburized parts and in sections and components that have not been carburized. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-111. Producer or source: Carbon steel mills.

SAE 1025

Alloy Digest ◽  
1987 ◽  
Vol 36 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Heat Treating ◽  
Plain Carbon Steel ◽  
General Purpose ◽  
Pressure Vessels ◽  
Permanent Mold ◽  
Steel Mills ◽  
Cold Worked ◽  
Permanent Mold Castings

Abstract SAE 1025 is a plain carbon steel for general-purpose construction and engineering. It is used in the hot-worked, cold-worked, normalized or water-quenched-and-tempered condition. It also is carburized and used for case-hardened parts. Its many uses include bolts, forgings, axles, machinery components, cold-extruded parts, pressure vessels, case-hardened parts, chain and sprocket assemblies, spinning tools and permanent-mold castings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-114. Producer or source: Carbon steel mills.

AISI 1566

Alloy Digest ◽  
1984 ◽  
Vol 33 (2) ◽  
Keyword(s):  
Carbon Steel ◽  
Heat Treating ◽  
Agricultural Machinery ◽  
High Carbon ◽  
Hand Tools ◽  
Steel Mills ◽  
Wide Range ◽  
Cold Worked ◽  
Hot Rolled ◽  
Good Workability

Abstract AISI 1566 is a high-carbon (nominally 0.66% carbon) steel containing 0.85-0.15% manganese. Its hardenability is low and on austenitizing and liquid quenching it develops a hard (martensitic) surface with a soft, ductile core. It can be used in the hot-rolled, annealed, normalized, cold-worked or liquid-quenched-and-tempered condition for a wide range of applications. It has good machinability and good workability. Its many uses include springs, shafts, hand tools, railway parts and agricultural machinery. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-100. Producer or source: Carbon steel mills.

UNS G10210

Alloy Digest ◽  
1988 ◽  
Vol 37 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Manganese Content ◽  
Heat Treating ◽  
Carbon Steels ◽  
High Manganese ◽  
Steel Mills ◽  
Cold Worked ◽  
Good Workability ◽  
High Manganese Content

Abstract UNS G10210 is a carbon steel of relatively high manganese content which increases hardenability and hardness over that of carbon steels of lower manganese. It combines good machinability, good workability (hot or cold) and good weldability. It is used in the annealed, hot-worked, normalized, cold-worked or water-quenched-and-tempered condition for many applications. It may be used in uncarburized applications and for components case-hardened by carburizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-122. Producer or source: Carbon steel mills.

Sign in / Sign up

Export Citation Format

Share Document