D-H No. 42

Alloy Digest ◽  
1956 ◽  
Vol 5 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
Nickel Iron ◽  
Nickel Iron Alloy

Abstract D.H No. 42 is a 42% nickel-iron alloy having low controlled coefficient of expansion. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-9. Producer or source: Driver-Harris Company.

NILVAR

Alloy Digest ◽  
1955 ◽  
Vol 4 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
Temperature Variations ◽  
Nickel Iron ◽  
Dimensional Changes ◽  
Nickel Iron Alloy

Abstract NILVAR is a 36% nickel-iron alloy having the lowest coefficient of expansion, recommended for applications requiring no dimensional changes with temperature variations. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-8. Producer or source: Driver-Harris Company.

NIROMET 46

Alloy Digest ◽  
1969 ◽  
Vol 18 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
Nickel Iron ◽  
Nickel Iron Alloy ◽  
Glass Seals

Abstract Niromet 46 is a 46% nickel-iron alloy having low and controlled coefficient of expansion. It is recommended for metal-to-glass seals and terminal bands in vitreous enameled resistors. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Fe-39. Producer or source: Wilbur B. Driver Company.

MAGNIFER 36K

Alloy Digest ◽  
1996 ◽  
Vol 45 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Electrical Resistance ◽  
Iron Alloy ◽  
Heat Treating ◽  
Soft Magnetic ◽  
Nickel Iron ◽  
Saturation Induction ◽  
Nickel Iron Alloy

Abstract Magnifer 36K is a soft-magnetic nickel-iron alloy with 36% nickel. It has a saturation induction of 1.3 T and a rather high electrical resistance of 0.75 ohm mm2/m. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: FE-110. Producer or source: VDM Technologies Corporation.

UNISEAL 52

Alloy Digest ◽  
1970 ◽  
Vol 19 (8) ◽  
Keyword(s):  
Thermal Expansion ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
Nickel Iron ◽  
Nickel Iron Alloy

Abstract UNISEAL 52 is a nickel-iron alloy produced for glass-to-metal seals with higher-than-normal thermal expansion glasses such as Types O120 and 9010. It is used in hermetically-sealed magnetic dry reed switches, compression seals, and ceramic seals where expansion is required to be almost linear to 1000 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-156. Producer or source: Cyclops Corporation.

MAGNIFER 7904

Alloy Digest ◽  
1984 ◽  
Vol 33 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Coercive Force ◽  
Physical Properties ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
High Permeability ◽  
Soft Magnetic ◽  
Nickel Iron ◽  
Nickel Iron Alloy

Abstract MAGNIFER 7904 is a soft magnetic nickel-iron alloy containing about 5% molybdenum. It offers extremely high permeability, very low coercive force and minimum hysteresis loss. It is used primarily for transformers, tape-wound troids, laminations, shielding and relay parts. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-291. Producer or source: Vereingte Deutsche Metallwerke AG. Originally published September 1983, revised February 1984.

TECHALLOY GLASSEAL 52

Alloy Digest ◽  
1979 ◽  
Vol 28 (5) ◽  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Thermal Expansion ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
Nickel Iron ◽  
Nickel Iron Alloy

Abstract TECHALLOY GLASSEAL 52 is a nickel-iron alloy produced for glass-to-metal seals with higher than normal thermal-expansion glasses such as Types 0120 and 9010, and certain ceramics. It has relatively good mechanical properties: a tensile strength of 80,000 psi and an elongation of 35%. It is used in a number of applications where expansion is required to be almost linear to 1000 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-260. Producer or source: Techalloy Company Inc..

MAGNIFER 36W

Alloy Digest ◽  
1996 ◽  
Vol 45 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Electrical Resistance ◽  
Iron Alloy ◽  
Heat Treating ◽  
Soft Magnetic ◽  
Nickel Iron ◽  
Saturation Induction ◽  
Nickel Iron Alloy

Abstract Magnifier 36 is a soft-magnetic nickel-iron alloy with 36% nickel. It has a saturation induction of 1.3 T and a rather high electrical resistance of 0.75 0.75 ohm mm2/m. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: FE-111. Producer or source: VDM Technologies Corporation.

UNISPAN 36

Alloy Digest ◽  
1970 ◽  
Vol 19 (6) ◽  
Keyword(s):  
Thermal Expansion ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Iron Alloy ◽  
Heat Treating ◽  
Nickel Iron ◽  
Dimensional Changes ◽  
Low Thermal Expansion ◽  
Nickel Iron Alloy

Abstract UNISPAN 36 is a 36% nickel-iron alloy having low thermal expansion in a -400 F to +350 F range. It is recommended for parts in precision machinery and for applications where dimensional changes due to temperature variation must be minimized. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-43. Producer or source: Cyclops Corporation.

CUPRO NICKEL 30%-707

Alloy Digest ◽  
1963 ◽  
Vol 12 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Heat Exchanger ◽  
Power Plant ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Iron Alloy ◽  
High Strength ◽  
Nickel Iron ◽  
Nickel Iron Alloy

Abstract Cupro Nickel, 30%-707 is a high strength copper-nickel-iron alloy for heat exchanger tubes in power plant feedwater heaters. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, joining, and surface treatment. Filing Code: Cu-133. Producer or source: Anaconda American Brass Company.

MUMETAL

Alloy Digest ◽  
1956 ◽  
Vol 5 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
High Permeability ◽  
Nickel Iron ◽  
Steel Corporation ◽  
Nickel Iron Alloy

Abstract MUMETAL is a high permeability nickel iron alloy to be used where high permeability at flux densities well under 5000 gausses is desirable. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-25. Producer or source: Allegheny Ludlum Steel Corporation. See also Alloy Digest Ni-398, December 1991.

Sign in / Sign up

Export Citation Format

Share Document