HAYNES ALLOY No. 589

Alloy Digest ◽  
1969 ◽  
Vol 18 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Resistance ◽  
Base Alloy ◽  
Heat Treating ◽  
Iron Base ◽  
Iron Base Alloy ◽  
Resistance To Wear ◽  
Haynes Alloy

Abstract HAYNES Alloy No. 589 is an iron-base alloy with extremely high resistance to wear, abrasion and corrosion. It is recommended for machinery parts such as seal rings and grit abrasion resistant components. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on casting, heat treating, machining, and joining. Filing Code: Fe-37. Producer or source: Union Carbide Materials Systems Division.

ALNICO-IV

Alloy Digest ◽  
1969 ◽  
Vol 18 (10) ◽  
Keyword(s):  
Physical Properties ◽  
Permanent Magnet ◽  
Tensile Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
General Purpose ◽  
Iron Base ◽  
Iron Base Alloy

Abstract Alnico-IV is an un-oriented permanent-magnet iron-base alloy. It is a general purpose alloy for use where space limitations make short magnets necessary. It is supplied in the as-cast or as-sintered condition. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Fe-40. Producer or source: General Magnetic Corporation.

UNISEAL 29-17

Alloy Digest ◽  
1970 ◽  
Vol 19 (11) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
Borosilicate Glasses ◽  
Iron Base ◽  
Iron Base Alloy ◽  
Temperature Performance

Abstract UNISEAL 29-17 is a controlled expansion iron-base alloy containing nickel and cobalt. It is widely used for glass-to-metal seals with borosilicate glasses commonly employed in electronic power tube envelopes. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-45. Producer or source: Cyclops Corporation.

AFCOMET 40

Alloy Digest ◽  
1953 ◽  
Vol 2 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Shear Strength ◽  
Cast Iron ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Good Resistance ◽  
Resistance To Wear

Abstract AFCOMET 40 is a dense, close-grained nickel-molybdenum cast iron with good resistance to wear and abrasion. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on casting, heat treating, machining, and joining. Filing Code: CI-2. Producer or source: Atlas Foundry Company.

HAYNES ALLOY No. 263

Alloy Digest ◽  
1987 ◽  
Vol 36 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Nickel Base ◽  
Haynes Alloy

Abstract HAYNES alloy No. 263 is a vacuum-melted and electroflux-refined high-temperature nickel-base alloy. It has good formability and weldability. It was developed by Rolls Royce. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep, and deformation. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-352. Producer or source: Haynes International Inc..

METGLAS ALLOY 2605S3A

Alloy Digest ◽  
2011 ◽  
Vol 60 (11) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Base Alloy ◽  
High Permeability ◽  
Iron Base ◽  
Iron Base Alloy

Abstract Metglas Alloy 2605S3A is an iron-base alloy with high permeability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming. Filing Code: Fe-157. Producer or source: Metglas Inc..

BRUSH ALLOY 200C

Alloy Digest ◽  
1969 ◽  
Vol 18 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Resistance ◽  
Heat Treating ◽  
Casting Alloy ◽  
Temperature Performance ◽  
Resistance To Wear

Abstract BRUSII Alloy 200C is a beryllium-nickel casting alloy having high resistance to wear, corrosion, thermal shock and oxidation. It is recommended for fuel pump impellers, turbines, non-sparking tools, molds for plastics and glass. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Ni-142. Producer or source: Brush Beryllium Company.

DMV 928

Alloy Digest ◽  
2009 ◽  
Vol 58 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
Alloying Elements ◽  
Nickel Base Alloy ◽  
Excellent Corrosion Resistance ◽  
Nickel Base

Abstract DMV 928 is a nickel-base alloy with high alloying elements of chromium, molybdenum, and copper for excellent corrosion resistance in reducing and oxidizing media. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1048. Producer or source: Mannesmann DMV Stainless USA Inc.

CARPENTER S7

Alloy Digest ◽  
1978 ◽  
Vol 27 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Tool Steel ◽  
High Resistance ◽  
Cold Work ◽  
Heat Treating ◽  
General Purpose ◽  
Good Resistance

Abstract CARPENTER S7 is a general-purpose air-hardening tool steel characterized by high resistance to impact and shock. It has good resistance to softening at moderately high temperatures. This combination of properties makes it suitable for many hot-work and cold-work applications. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on heat treating, machining, and surface treatment. Filing Code: TS-329. Producer or source: Carpenter.

S INCONEL

Alloy Digest ◽  
1960 ◽  
Vol 9 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
High Corrosion Resistance ◽  
International Nickel Company ◽  
Resistance To Wear ◽  
Nickel Base

Abstract S Inconel is a nickel-base alloy recommended for applications requiring resistance to wear and galling in addition to high corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Ni-63. Producer or source: The International Nickel Company Inc..

AMPCO METAL-18

Alloy Digest ◽  
1957 ◽  
Vol 6 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Resistance ◽  
High Strength ◽  
Aluminum Bronze ◽  
Resistance To Wear ◽  
Alpha Beta

Abstract AMPCO METAL 18 is an alpha-beta aluminum bronze having high resistance to wear and fatigue. It has high strength combined with good ductility and toughness. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, machining, and joining. Filing Code: Cu-51. Producer or source: Ampco Metal Inc..

Sign in / Sign up

Export Citation Format

Share Document