HASTELLOY B-3 ALLOY WELDING PRODUCTS

Alloy Digest ◽  
1999 ◽  
Vol 48 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Dissimilar Welding ◽  
Base Metals ◽  
Corrosion Resistant ◽  
Iron Base

Abstract Hastelloy B-3 alloy welding products are used to promote similar corrosion resistance to Hastelloy B-3 (Alloy Digest Ni-461, August 1994) and B-2 (Alloy Digest Ni-249, September 1997) base metals, for the dissimilar welding of Hastelloy B-3 and B-2 to nickel or iron-base corrosion resistant alloys, and for overlay cladding. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on joining. Filing Code: Ni-552. Producer or source: Haynes International Inc.

INCONEL WELDING ELECTRODE 122

Alloy Digest ◽  
1992 ◽  
Vol 41 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Weld Metal ◽  
Physical Properties ◽  
Tensile Properties ◽  
Dissimilar Welding ◽  
Corrosion Resistant ◽  
Inconel Alloy ◽  
Welding Electrode

Abstract INCONEL WELDING ELECTRODE 122 is a highly alloyed product used for joining Inconel alloy 622 (See Alloy Digest Ni-382, May 1990) and similar corrosion resistant grades. In dissimilar welding, it can be used to prevent preferential weld metal attack. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as joining. Filing Code: Ni-407. Producer or source: Inco Alloys International Inc..

COPPER ALLOY No. C93500

Alloy Digest ◽  
1982 ◽  
Vol 31 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Corrosion Resistant ◽  
Low Strength

Abstract Copper Alloy No. C93500 is a cast bronze containing nominally 9% lead and 5% tin. It has excellent machinability, low strength and good resistance to corrosion. It is used for corrosion-resistant castings, small bearings and bushings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-439. Producer or source: Copper alloy foundries.

COPPER ALLOY No. C93400

Alloy Digest ◽  
1980 ◽  
Vol 29 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Corrosion Resistant ◽  
Tin Bronze

Abstract Copper Alloy No. C93400 is cast bronze containing nominally 8% tin and 8% lead. Former commercial names (not recommended) are (1) High-Leaded Tin Bronze and (2) 84-8-8-0. It has excellent machinability, low strength and good resistance to corrosion. Its applications include bearings, pump impellers and corrosion-resistant castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-401. Producer or source: Copper alloy foundries.

COOPER ALLOY 14S

Alloy Digest ◽  
1964 ◽  
Vol 13 (7) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Corrosion Resistant ◽  
Temperature Performance ◽  
Corrosion Resistant Alloy

Abstract Cooper Alloy 14S is an abrasion, heat and corrosion resistant alloy steel containing 12% chromium. It can be hardened by heat treatment. It is recommended for pumps and valves in the cast form. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-158. Producer or source: Cooper Alloy Corporation.

ARMCO 410 Cb

Alloy Digest ◽  
1963 ◽  
Vol 12 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Corrosion Resistant Steel ◽  
Resistant Steel ◽  
Corrosion Resistant ◽  
Temperature Performance

Abstract Armco 410 Cb is a modified Type 410 corrosion resistant steel by the addition of columbium. It is extremely tough and impact resistant. It is a hardenable grade but less sensitive to tempering variables than Type 410. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-145. Producer or source: Armco Inc., Eastern Steel Division. See also Alloy Digest SS-261, October 1971.

LEAD

Alloy Digest ◽  
1971 ◽  
Vol 20 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Corrosion Resistant ◽  
Temperature Performance ◽  
The Common

Abstract LEAD is the heaviest, the most corrosion resistant and among the most malleable of the common metals. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, forming, and joining. Filing Code: Pb-7. Producer or source: Primary lead producers.

COPPER ALLOY No. C94500

Alloy Digest ◽  
1987 ◽  
Vol 36 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Corrosion Resistant ◽  
Low Strength

Abstract Copper Alloy No. C94500 is a cast bronze containing nominally 73% copper, 20% lead and 7% tin. It has excellent machinability, good casting characteristics, low strength and good resistance to corrosion. It is used for bearings, locomotive wearing parts and for corrosion-resistant castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-528. Producer or source: Copper alloy foundries.

AMPCO 15

Alloy Digest ◽  
1958 ◽  
Vol 7 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Aluminum Bronze ◽  
Bend Strength ◽  
Corrosion Resistant

Abstract AMPCO 15 is a corrosion resistant aluminum bronze combining good bearing qualities and wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive, shear, and bend strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, machining, and joining. Filing Code: Cu-64. Producer or source: Ampco Metal Inc..

IncoMAP Alloy Al-9052

Alloy Digest ◽  
1989 ◽  
Vol 38 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
Aluminum Alloys ◽  
Mechanical Alloying ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Corrosion Resistant

Abstract IncoMAP alloy Al-9052 is a high-strength, corrosion resistant aluminum alloy made by the mechanical alloying process. It is dispersion strengthened by oxides and carbides. Its density is 5% less than age hardenable aluminum alloys of comparable strength. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-296. Producer or source: Inco Alloys International Inc..

MÄRKER MARESIST 4565 S

Alloy Digest ◽  
2013 ◽  
Vol 62 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Corrosion Resistant

Abstract Märker Maresist 4565 S is an alloy high in both nitrogen and manganese. It is highly weldable and corrosion resistant. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, and joining. Filing Code: SS-1152. Producer or source: Schmidt & Clemens Inc..

Sign in / Sign up

Export Citation Format

Share Document