INCONEL ALLOY 740H

Alloy Digest ◽  
2014 ◽  
Vol 63 (8) ◽  
Keyword(s):  
High Temperature ◽  
Impact Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Inconel Alloy ◽  
Energy Group ◽  
Temperature Performance ◽  
Boiler Tubes ◽  
Steam Boilers

Abstract Alloy 740H (see Alloy Digest Ni-613, September 2003) is a precipitation-hardenable Ni-Cr-Co alloy containing molybdenum and niobium. The primary application for the alloy is boiler tubes for advanced ultra-supercritical steam boilers. This data sheet covers a modification of that alloy to correct two problems, i.e., the eta-phase formation with a loss of impact strength between 750–800 deg C (1382–1472 deg F) and to render the alloy more weldable. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Ni-716. Producer or source: PCC Energy Group.

INCONEL ALLOY 740

Alloy Digest ◽  
2003 ◽  
Vol 52 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Electricity Generation ◽  
Heat Treating ◽  
Inconel Alloy ◽  
Temperature Performance ◽  
Boiler Tubes

Abstract Alloy 740 is a precipitation-hardenable Ni-Cr-Co alloy containing molybdenum and niobium. The primary application for the alloy is boiler tubes for the European advanced electricity generation program (Thermie). This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-613. Producer or source: Special Metals Corporation.

INCONEL ALLOY N06230

Alloy Digest ◽  
2009 ◽  
Vol 58 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Inconel Alloy ◽  
Temperature Performance ◽  
Resistance To Oxidation

Abstract Inconel Alloy N06230 is a Ni-Cr-W alloy with excellent strength and resistance to oxidation at elevated temperatures. This alloy offers good metallurgical stability and is readily fabricated by conventional processes and procedures. This datasheet provides information on composition, physical properties, microstructure, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-667. Producer or source: Special Metals Corporation.

INCONEL ALLOY 230

Alloy Digest ◽  
2010 ◽  
Vol 59 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Inconel Alloy ◽  
Temperature Performance ◽  
Resistance To Oxidation

Abstract Inconel 230 is a Ni-Cr-W alloy with excellent strength and resistance to oxidation at elevated temperatures. The alloy offers good metallurgical stability and is readily fabricated by conventional processes and procedures. Applications for Inconel 230 are similar to those for Inconel alloy 617. (See Alloy Digest Ni-179, September 1972.) Update: This datasheet has been superceded by Inconel Alloy N06230, Alloy Digest Ni-667, March 2009. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-639. Producer or source: Special Metals Corporation. Originally published June 2006, revised January 2010.

DMV 347 HFG

Alloy Digest ◽  
2008 ◽  
Vol 57 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance ◽  
Boiler Tubes ◽  
Seamless Tubing

Abstract DMV 347 HFG is produced as seamless tubing suitable as a replacement for old reheater and superheater boiler tubes. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1022. Producer or source: Mannesmann DMV Stainless USA Inc.

INCONEL ALLOY 725HS

Alloy Digest ◽  
2003 ◽  
Vol 52 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Corrosion Resistant ◽  
Inconel Alloy ◽  
Temperature Performance

Abstract Inconel Alloy 725HS is a Ni-Cr-Mo-Cb alloy that is age hardenable and is a higher strength version of Inconel alloy 725 (see Alloy Digest Ni-445, January 1994). The alloy is corrosion resistant and is often used in fastener or marine fabrication applications. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as heat treating and machining. Filing Code: Ni-604. Producer or source: Special Metals Corporation.

ALLEGHENY LUDLUM AL276

Alloy Digest ◽  
1996 ◽  
Vol 45 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Power Plant ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Chemical Plants ◽  
Temperature Performance

Abstract Allegheny Ludlum AL276 is widely used in the most severe environments found in chemical plants and in power plant desulfurization systems. The high molybdenum level with tungsten gives excellent pitting and crevice corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Ni-497. Producer or source: Allegheny Ludlum Corporation.

NICROFER 5520 Co

Alloy Digest ◽  
1995 ◽  
Vol 44 (3) ◽  
Keyword(s):  
High Temperature ◽  
Chemical Composition ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Temperatures ◽  
Heat Treating ◽  
High Temperature Corrosion ◽  
Creep Properties ◽  
Nickel Chromium ◽  
Temperature Performance

Abstract NICROFER 5520 Co is a nickel-chromium-cobalt-molybdenum alloy with excellent strength and creep properties up to high temperatures. Due to its balanced chemical composition the alloy shows outstanding resistance to high temperature corrosion in the form of oxidation and carburization. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Ni-480. Producer or source: VDM Technologies Corporation.

PYROTOOL A

Alloy Digest ◽  
1971 ◽  
Vol 20 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Good Ductility ◽  
Extrusion Dies ◽  
Temperature Performance

Abstract PYROTOOL A has been designed to display high strength and good ductility at temperatures up to 1200 F. It is used for high-temperature tooling, extrusion dies, liners, dummy blocks, forging dies, mandrels, holders, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-47. Producer or source: Carpenter.

UNISPAN LR35

Alloy Digest ◽  
1971 ◽  
Vol 20 (1) ◽  
Keyword(s):  
Thermal Expansion ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Coefficient Of Thermal Expansion ◽  
Heat Treating ◽  
Temperature Performance ◽  
Operational Level

Abstract UNISPAN LR35 offers the lowest coefficient of thermal expansion of any alloy now available. It is a low residual modification of UNISPAN 36 for fully achieving the demanding operational level of precision equipment. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: Fe-46. Producer or source: Cyclops Corporation.

MAR-M Alloy 200

Alloy Digest ◽  
1965 ◽  
Vol 14 (11) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Turbine Blade ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Temperature Performance ◽  
Nickel Base

Abstract MAR-M Alloy 200 is a nickel-base alloy designed primarily as a cast turbine blade material which retains useful strength up to 1900 F. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance as well as heat treating and joining. Filing Code: Ni-107. Producer or source: Martin Metals Company.

Sign in / Sign up

Export Citation Format

Share Document