TIMKEN TBA-2

Alloy Digest ◽  
1964 ◽  
Vol 13 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Roller Bearing ◽  
Heat Treating ◽  
Bearing Steel ◽  
Large Sections

Abstract The TBA-2 alloy is a through hardening bearing steel capable of air hardening in large sections. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-160. Producer or source: Timken Roller Bearing Company.

COPPER ALLOY No. C93500

Alloy Digest ◽  
1982 ◽  
Vol 31 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Corrosion Resistant ◽  
Low Strength

Abstract Copper Alloy No. C93500 is a cast bronze containing nominally 9% lead and 5% tin. It has excellent machinability, low strength and good resistance to corrosion. It is used for corrosion-resistant castings, small bearings and bushings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-439. Producer or source: Copper alloy foundries.

BUNTING ALLOY 907

Alloy Digest ◽  
1977 ◽  
Vol 26 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Tin Bronze ◽  
Standard Alloy

Abstract BUNTING Alloy 907 is a cast copper-tin alloy (tin bronze) recommended for severe service requirements. It is used widely for bearings and gears. It is a standard alloy for the manufacture of cast gear blanks and has long been known as Phosphor Gear Bronze. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-328. Producer or source: NL Industries Inc., Bearing Division.

FEDERAL BRONZE 822

Alloy Digest ◽  
1976 ◽  
Vol 25 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Copper Base ◽  
High Speeds ◽  
High Lead

Abstract FEDERAL BRONZE 822 is a copper-base, high-lead bearing bronze with superior resistance to scoring and seizure beyond the endurance and danger limits of ordinary bearing bronzes. It is used in applications involving high speeds, poor lubrication, heat-generating loads, elevated temperatures, dusty and gritty surroundings, or where a liquid other than oil is used as the lubricant. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on casting, heat treating, machining, joining, and surface treatment. Filing Code: Cu-324. Producer or source: Federal Bronze Products Inc..

LUMEN ALLOY 9

Alloy Digest ◽  
1957 ◽  
Vol 6 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Sea Water ◽  
Heat Treating

Abstract UMEN ALLOY 9 is a manganese bronze having excellent combination of strength and corrosion resistance in fresh and sea water. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-57. Producer or source: Lumen Bearing Company.

BUNTING ALLOY 156

Alloy Digest ◽  
1965 ◽  
Vol 14 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating

Abstract Bunting No. 156 is a hard phosphor gear and bearing bronze recommended where the service requirements are severe. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Cu-158. Producer or source: Bunting Brass & Bronze Company.

ELEKTRON AZM

Alloy Digest ◽  
1960 ◽  
Vol 9 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
High Strength Level ◽  
Extrusion Alloy

Abstract ELEKTRON AZM is a magnesium extrusion alloy having a high strength level. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Mg-45. Producer or source: Magnesium Elektron Ltd.

COPPER ALLOY No. C93400

Alloy Digest ◽  
1980 ◽  
Vol 29 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Corrosion Resistant ◽  
Tin Bronze

Abstract Copper Alloy No. C93400 is cast bronze containing nominally 8% tin and 8% lead. Former commercial names (not recommended) are (1) High-Leaded Tin Bronze and (2) 84-8-8-0. It has excellent machinability, low strength and good resistance to corrosion. Its applications include bearings, pump impellers and corrosion-resistant castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-401. Producer or source: Copper alloy foundries.

BEARIUM METAL

Alloy Digest ◽  
1972 ◽  
Vol 21 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Copper Base ◽  
High Speeds ◽  
High Lead

Abstract BEARIUM METAL is a copper-base, high-lead bearing bronze with superior resistance to scoring and seizure beyond the endurance and danger limits of ordinary bearing bronzes. It is used in applications involving high speeds, poor lubrication, heat-generating loads, elevated temperatures, dusty and gritly surroundings, or where a liquid other than oil is used as the lubricant. It is produced in three grades: B-4, B-8 and B-10. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on casting, heat treating, machining, joining, and surface treatment. Filing Code: Cu-258. Producer or source: Bearium Metals Corporation. Revised as Bearium B-4, B-8, B-10, B-11, Alloy Digest Cu-860, April 2017.

BUNTING ALLOY 905

Alloy Digest ◽  
1978 ◽  
Vol 27 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Good Combination ◽  
Zinc Alloy ◽  
Bearing Alloy ◽  
Gas Pressures

Abstract BUNTING Alloy 905 is a cast bronze bearing alloy. It is a copper-tin-zinc alloy known also as Gunmetal and 88-10-0-2 alloy. It has a good combination of corrosion resistance and strength. It is recommended for castings that are to be used under liquid or gas pressures. Its many uses include bearings, fittings and valves. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-358. Producer or source: NL Industries Inc., Bearing Division.

TIMKEN 4419

Alloy Digest ◽  
1964 ◽  
Vol 13 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Roller Bearing ◽  
Heat Treating ◽  
Temperature Performance

Abstract Timken 4419 alloy steel is a carbon-molybdenum type carburizing steel suitable for bearings, gears and other carburized articles produced by quenching directly from the carburizer. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-171. Producer or source: Timken Roller Bearing Company.

Sign in / Sign up

Export Citation Format

Share Document