YOUNGSTOWN YS-T STEEL

Alloy Digest ◽  
1971 ◽  
Vol 20 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Hot Rolled

Abstract Youngstown YS-T Steel comprises a family of hot-rolled, fully-killed, high-strength titanium steels with excellent formability and weldability. They are available in four yield-strength levels: 50,000, 60,000, 70,000 and 80,000 psi. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-261. Producer or source: Youngstown Sheet and Tube Company.

MAGNESIUM ZK60A

Alloy Digest ◽  
1967 ◽  
Vol 16 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Chemical Company ◽  
Temperature Performance

Abstract Magnesium ZK60A is a heat treatable extrusion and forging alloy recommended for applications where high strength with good toughness are required. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive, shear, bearing, and bend strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Mg-62. Producer or source: The Dow Chemical Company.

REPUBLIC 50

Alloy Digest ◽  
1967 ◽  
Vol 16 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Structural Steel ◽  
High Strength ◽  
Heat Treating ◽  
High Yield ◽  
Bend Strength ◽  
High Yield Strength

Abstract Republic 50 is a high-strength low-alloy structural steel recommended where high yield strength and toughness combined with good weldability and corrosion resistance are required. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive, shear, and bend strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-205. Producer or source: Republic Steel Corporation.

RUUKKI OPTIM 900 QC

Alloy Digest ◽  
2014 ◽  
Vol 63 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Bend Radius ◽  
Minimum Yield

Abstract Optim 900 QC (896 MPa minimum yield strength) is a quenched (Q), cold formable (C) steel that exceeds most other materials with the tightest bend radius. The Optim family of alloys offers high strength and good workshop properties. This datasheet provides information on composition, physical properties, microstructure, tensile properties, and bend strength as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, and joining. Filing Code: CS-180. Producer or source: Rautaruukki Corporation.

DOMEX 600MC

Alloy Digest ◽  
2009 ◽  
Vol 58 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
Hsla Steel ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Cold Forming ◽  
Hot Rolled ◽  
Earthmoving Machines

Abstract Domex 600MC is a hot-rolled, extra high-strength low-alloy (HSLA) steel for cold forming operations. It is available in thicknesses of 2.00-10.00 mm. The alloy meets or exceeds the requirements of S600MC in EN 10149-2. Applications include truck chassis, crane booms, and earthmoving machines. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: SA-598. Producer or source: SSAB Swedish Steel Inc.

DOMEX 355MC

Alloy Digest ◽  
2008 ◽  
Vol 57 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
Hsla Steel ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Cold Forming ◽  
Hot Rolled

Abstract Domex 355 MC is a hot-rolled, high-strength low-alloy (HSLA) steel for cold forming operations. The alloy meets or exceeds the requirements of S355MC in EN 10149-2. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: SA-585. Producer or source: SSAB Swedish Steel Inc.

RUUKKI OPTIM 1100 QC

Alloy Digest ◽  
2014 ◽  
Vol 63 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Bend Radius ◽  
Minimum Yield

Abstract Optim 1100 QC (1100 MPa minimum yield strength) is a quenched (Q), cold formable (C) steel that exceeds most other materials with the tightest bend radius. The Optim family of alloys offers high strength and good workshop properties. This datasheet provides information on composition, physical properties, microstructure, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, and joining. Filing Code: CS-183. Producer or source: Rautaruukki Corporation.

STRENX 1100 MC

Alloy Digest ◽  
2016 ◽  
Vol 65 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Structural Steel ◽  
Tensile Properties ◽  
High Strength ◽  
Bend Strength ◽  
Cold Forming ◽  
Hot Rolled ◽  
Minimum Yield

Abstract Strenx 1100 MC is a high-strength hot-rolled structural steel made for cold forming, with minimum yield strength of 1100 MPa (160 ksi) for stronger and lighter structures. This alloy meets or exceeds the requirements of S1100 MC in EN 10149-2. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on surface qualities as well as forming, machining, and joining. Filing Code: SA-773. Producer or source: SSAB Swedish Steel Inc..

MAXI-FORM 50

Alloy Digest ◽  
1972 ◽  
Vol 21 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Low Alloy Steel ◽  
Edge Cracking

Abstract MAXI-FORM 50 is a high-strength low-alloy steel developed for applications involving severe bending or moderate draw forming with exceptional freedom from rupture and edge cracking. It is supplied in the 50,000 psi yield-strength range, and also has good weldability. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-282. Producer or source: Republic Steel Corporation.

RUUKKI OPTIM 700 MC

Alloy Digest ◽  
2014 ◽  
Vol 63 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Impact Strength ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Minimum Yield

Abstract RUUKKI OPTIM 700 MC (700 MPa minimum yield strength) is a thermomechanically rolled (M), cold formable (C) steel that exceeds EN standards requirement (EN 10149-2). Optim 700 MC Plus offers high strength, excellent flange ability, excellent shearability and pierceability, and excellent impact strength in all directions. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: CS-178. Producer or source: Rautaruukki Corporation.

STRENX 650MC

Alloy Digest ◽  
2016 ◽  
Vol 65 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Structural Steel ◽  
Tensile Properties ◽  
High Strength ◽  
Bend Strength ◽  
Cold Forming ◽  
Hot Rolled ◽  
Minimum Yield

Abstract Strenx 650MC is a high-strength hot-rolled structural steel made for cold forming, with minimum yield strength of 650 MPa (94 ksi) for stronger and lighter structures. This alloy meets or exceeds the requirements of S650MC in EN 10149-2. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming. Filing Code: SA-759. Producer or source: SSAB Swedish Steel Inc..

Sign in / Sign up

Export Citation Format

Share Document