CANNON-MUSKEGON 8620

Alloy Digest ◽  
1973 ◽  
Vol 22 (12) ◽  
Keyword(s):  
Wear Resistance ◽  
Corrosion Resistance ◽  
Alloy Steel ◽  
Investment Casting ◽  
Silicon Content ◽  
Heat Treating ◽  
Low Carbon ◽  
Heat Treated ◽  
Casting Industry ◽  
Small Parts

Abstract CANNON-MUSKEGON 8620 is a low-carbon triple-alloy steel capable of being carburized for wear resistance or heat treated for toughness. This steel is suitable for many engineering applications, and is used in large quantities in the investment casting industry for small parts. A higher silicon content is permissible in this steel than in AISI 8620 (wrought) alloy steel. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: SA-299. Producer or source: Cannon-Muskegon Corporation.

CANNON-MUSKEGON 4140

Alloy Digest ◽  
1975 ◽  
Vol 24 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Alloy Steel ◽  
Investment Casting ◽  
Silicon Content ◽  
Cast Alloy ◽  
Heat Treating ◽  
Medium Carbon ◽  
Aisi 4140 ◽  
Casting Industry

Abstract CANNON-MUSKEGON 4140 is a medium-carbon cast alloy steel with good hardenability, strength and toughness. It is used in large quantities in the investment casting industry. A higher silicon content is permissible in this steel than in AISI 4140 (wrought) alloy steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: SA-317. Producer or source: Cannon-Muskegon Corporation.

AISI 4615

Alloy Digest ◽  
1961 ◽  
Vol 10 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Low Temperature ◽  
Alloy Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
High Toughness ◽  
Steel Mills ◽  
Temperature Performance

Abstract AISI 4615 is a low-carbon, nickel-molybdenum alloy steel of the carburizing grade, recommended for applications where high toughness and excellent wear resistance are required. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: SA-112. Producer or source: Alloy steel mills and foundries.

CANNON-MUSKEGON 8630

Alloy Digest ◽  
1973 ◽  
Vol 22 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Investment Casting ◽  
Silicon Content ◽  
Cast Steel ◽  
Heat Treating ◽  
Medium Carbon ◽  
Casting Industry ◽  
Alloy Cast

Abstract CANNON-MUSKEGON 8630 is a medium-carbon triple-alloy cast steel of moderate hardenability. This steel is suitable for many engineering applications and is used in large quantities in the investment casting industry. A higher silicon content is permissible in this steel than in AISI 8630 (wrought) alloy steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: SA-296. Producer or source: Cannon-Muskegon Corporation.

AISI C1060

Alloy Digest ◽  
1969 ◽  
Vol 18 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Spring Steel ◽  
High Carbon ◽  
Steel Mills

Abstract AISI C1060 is a high-carbon water or oil hardening tool and spring steel recommended for heavy machinery parts, shafts, springs and miscellaneous tools requiring strength and wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: CS-32. Producer or source: Carbon and alloy steel mills.

ALLOY STEEL 1.8 Cu-1.0 Mn-1.2 Si

Alloy Digest ◽  
1976 ◽  
Vol 25 (10) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Cast Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Mills

Abstract Alloy Steel 1.8 Cu-1.0 Mn-1.2 Si is a low-carbon (0.20% max.) cast steel designed to provide intermediate tensile and yield strength. Copper lowers the ductility and toughness of cast steel but, for a given increase in tensile strength, the loss of ductility and toughness is less if copper is added than if carbon is increased. This steel has many uses such as booms, long shafting and gears. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SA-325. Producer or source: Alloy steel mills and foundries.

UNS H86170

Alloy Digest ◽  
1988 ◽  
Vol 37 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Heavy Duty ◽  
Good Strength ◽  
Nickel Chromium ◽  
Steel Mills

Abstract UNS H-86170 is a low-carbon nickel-chromium-molybdenum carburizing steel of good hardenability. Its core is characterized by good strength and toughness. It is recommended for heavy-duty applications such as cams, chains, fasteners, gears, shafts and piston pins. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-435. Producer or source: Alloy steel mills and foundries.

INCO ALLOY MS 250

Alloy Digest ◽  
1987 ◽  
Vol 36 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Intermetallic Compound ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
Martensitic Matrix ◽  
Inco Alloy ◽  
Heat Treated

Abstract INCO Alloy MS 250 is a cobalt-free managing steel with nominal yield strength of 250,000 psi, fully heat-treated. Strengthening results from intermetallic-compound precipitation in a low-carbon martensitic matrix. It has excellent weldability. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-426. Producer or source: Inco Alloys International Inc..

AISI 5117

Alloy Digest ◽  
1980 ◽  
Vol 29 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Chromium Steel ◽  
Low Carbon ◽  
Steel Mills ◽  
Medium Strength

Abstract AISI 5117 is a low-carbon, low-chromium steel for carburizing and other uses. It is recommended for carburizing applications where it is sufficient to have a low-hardenability core of medium strength and toughness combined with a hard, wear-resistant carburized case. It is used without carburizing in the as-rolled, annealed, normalized or quenched-and-tempered condition. It is suitable for use in the automotive, farm-machinery and many other industries. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-376. Producer or source: Alloy steel mills and foundries.

SAE 8115

Alloy Digest ◽  
1973 ◽  
Vol 22 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Nickel Chromium ◽  
Steel Mills ◽  
Medium Strength

Abstract SAE 8115 is a low-carbon nickel-chromium-molybdenum carburizing steel recommended for applications where a core of medium strength and toughness combined with a wear-resistant carburized case is sufficient. It has medium hardenability and can be used without carburizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-292. Producer or source: Alloy steel mills and foundries.

UNS H47180

Alloy Digest ◽  
1988 ◽  
Vol 37 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
High Hardenability ◽  
Nickel Chromium ◽  
Steel Mills

Abstract UNS No. H47180 is a low-carbon nickel-chromium-molybdenum carburizing steel recommended for applications requiring a strong, tough core combined with a highly wear-resistant carburized case. It has fairly high hardenability and can be used without carburizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-430. Producer or source: Alloy steel mills and foundries.

Sign in / Sign up

Export Citation Format

Share Document