INLAND INX STEELS

Alloy Digest ◽  
1980 ◽  
Vol 29 (10) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Yield Point ◽  
Heat Treating ◽  
Strength Level ◽  
Wide Range ◽  
Farm Equipment ◽  
Minimum Yield

Abstract Inland INX Steels are a series of balanced composition steels with columbium or vanadium additions; they were developed to provide a choice of mechanical properties and engineering features. They are furnished to minimum yield point levels ranging from 42,000 psi (290 MPa) to 70,000 psi (485 MPa); this allows matching strength level to the job requirement. Their wide range of use includes automotive, tractors, farm equipment, bridges and buildings. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-377. Producer or source: Ispat Inland Inc..

NICORROS AL

Alloy Digest ◽  
1994 ◽  
Vol 43 (12) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
Stress Corrosion Cracking ◽  
Heat Treating ◽  
Alloying Additions ◽  
Excellent Corrosion Resistance ◽  
Wide Range

Abstract NICORROS AL is age-hardenable by virtue of the alloying additions of aluminum and titanium. The alloy shows excellent corrosion resistance over a wide range of conditions, including stress-corrosion cracking. The high mechanical properties can be used to 1200 F (650 C). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Ni-473. Producer or source: VDM Technologies Corporation.

CP TITANIUM GRADES ALLVAC 30, 40, 50, 70 and ALLVAC 40+Pd

Alloy Digest ◽  
1990 ◽  
Vol 39 (7) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Commercially Pure ◽  
Minimum Yield

Abstract Mechanical properties of commercially pure grades of titanium are controlled primarily by various amounts of oxygen additions. The two most popular grades in bar form are those with minimum yield strengths of 40 and 70 ksi; ASTM B348 Grade 2 (Allvac 40) and ASTM B348 Grade 4 (Allvac 70), respectively. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-96. Producer or source: Teledyne Allvac.

ANACONDA ALLOY 268

Alloy Digest ◽  
1982 ◽  
Vol 31 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Cold Working ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Wide Range ◽  
Copper Zinc ◽  
Cold Worked

Abstract ANACONDA Alloy 268 is a copper-zinc alloy with excellent cold-working properties; it can be cold worked by all the conventional fabrication processes. Its corrosion resistance is excellent-to-good in most environments. This alloy has a wide range of applications including items such as springs, bathroom fixtures, automotive radiators, lamp sockets and sanitary traps. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-442. Producer or source: Anaconda American Brass Company.

PD-135

Alloy Digest ◽  
1972 ◽  
Vol 21 (11) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Thermal Conductivities

Abstract PD-135 is an oxygen-free, age-hardenable copper containing chromium and cadmium. It has excellent mechanical properties and high electrical and thermal conductivities. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-261. Producer or source: Phelps Dodge Copper Products Company.

COPPER ALLOY No. 675

Alloy Digest ◽  
1971 ◽  
Vol 20 (11) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Good Corrosion Resistance ◽  
Copper Zinc

Abstract COPPER ALLOY No. 675 is a copper-zinc alloy having excellent mechanical properties and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-244. Producer or source: Brass mills.

ANACONDA ALLOY (C) 521

Alloy Digest ◽  
1979 ◽  
Vol 28 (10) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Heavy Duty ◽  
Bronze Alloy ◽  
Good Corrosion Resistance ◽  
Bridge Bearing

Abstract ANACONDA Alloy (C) 521 is the phosphor bronze used where the highest demand is made for resilience, strength and resistance to fatigue. It has generally higher mechanical properties than Anaconda Alloy (A) 510 which is the most widely used phosphor bronze. Alloy (C) 521 has excellent to good corrosion resistance in most environments. Typical applications include heavy-duty springs, bridge bearing plates and heavy-duty cold-headed parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-381. Producer or source: Anaconda American Brass Company.

AMPCOLOY 525

Alloy Digest ◽  
1979 ◽  
Vol 28 (9) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Salt Water ◽  
Heat Treating ◽  
Chemical Processing ◽  
Copper Nickel Alloy ◽  
Superior Corrosion Resistance

Abstract AMPCOLOY 525 is a cast copper-nickel alloy to which norminally 1.5% iron has been added to increase its resistance to corrosion by salt water. It is recommended where superior corrosion resistance. weldability and mechanical properties are required. Among its many uses are parts that must be resistant to seawater, steam fittings and chemical processing equipment This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-380. Producer or source: Ampco Metal Inc..

SUPERSTON 40

Alloy Digest ◽  
1965 ◽  
Vol 14 (4) ◽  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Aluminum Bronze

Abstract SUPERSTON 40 is an aluminum bronze containing 12% manganese and has good casting properties and excellent mechanical properties. It is recommended for any application where extreme corrosion resistance is required and where weldability is desired, such as propellers and marine equipment. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on corrosion resistance as well as casting, forming, heat treating, and machining. Filing Code: Cu-150. Producer or source: H. Kramer & Company.

UNS A96061

Alloy Digest ◽  
1988 ◽  
Vol 37 (11) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance

Abstract UNS A96061 is a wrought precipitation-hardenable aluminum alloy having excellent resistance to corrosion and good mechanical properties. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-292. Producer or source: Various aluminum companies.

VIRGO 17.4 PH

Alloy Digest ◽  
2013 ◽  
Vol 62 (5) ◽  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Precipitation Hardening ◽  
Heat Treating

Abstract Virgo 17.4 PH is a 17Cr-4Ni-3Cu-0.3% Cb alloy that is precipitation hardening. It is martensitic and combines high mechanical properties with corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1145. Producer or source: Industeel USA, LLC.

Sign in / Sign up

Export Citation Format

Share Document