DIWA 393

Alloy Digest ◽  
2011 ◽  
Vol 60 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Nuclear Power ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Synthetic Fuels ◽  
Methanol Production ◽  
Elevated Pressures ◽  
Temperature Performance ◽  
Grade Material

Abstract DIWA 393 is used where combined resistance to elevated temperatures up to 375 C (707 F) and elevated pressures is required, in nuclear power plant engineering, for example, in urea and methanol production, and in the manufacture of synthetic fuels. This steel is supplied in waterquenched and tempered state in thicknesses up to 250 mm (9.84 in.). DIWA 393 is based on the standardized 20MnMoNi45 grade (Material No. 1.6311), EN 10028, Part 2. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as heat treating and joining. Filing Code: SA-626. Producer or source: Dillinger Hütte GTS.

INCONEL ALLOY N06230

Alloy Digest ◽  
2009 ◽  
Vol 58 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Inconel Alloy ◽  
Temperature Performance ◽  
Resistance To Oxidation

Abstract Inconel Alloy N06230 is a Ni-Cr-W alloy with excellent strength and resistance to oxidation at elevated temperatures. This alloy offers good metallurgical stability and is readily fabricated by conventional processes and procedures. This datasheet provides information on composition, physical properties, microstructure, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-667. Producer or source: Special Metals Corporation.

ELEKTRON QH21A

Alloy Digest ◽  
1979 ◽  
Vol 28 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Casting Alloy ◽  
Casting Alloys ◽  
Temperature Performance

Abstract ELEKTRON QH21A is a magnesium-base casting alloy developed to meet the ever increasing requirements for casting alloys to operate at elevated temperatures. It is of particular interest to designers and stress engineers for highly stressed components operating at temperatures up to 480 F (250 C), especially where pressure tightness is a requirement. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Mg-72. Producer or source: Magnesium Elektron Inc..

ACI TYPE CF-12M

Alloy Digest ◽  
1965 ◽  
Vol 14 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Temperature Performance

Abstract Type CF-12M is a chromium-nickel-molybdenum alloy steel having corrosion resistance and good strength at moderately elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-167. Producer or source: Stainless steel foundries.

ALLEGHENY B-47

Alloy Digest ◽  
1961 ◽  
Vol 10 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Temperature Performance ◽  
Hot Work Steel ◽  
Hot Hardness

Abstract ALLEGHENY B-47 is a chromium, tungsten, cobalt, vanadium hot work steel that has excellent resistance to shock and abrasion at elevated temperatures. It has good hot hardness. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, and machining. Filing Code: TS-70. Producer or source: Allegheny Ludlum Corporation. Originally published May 1958, revised December 1961.

PEERLESS LCT2

Alloy Digest ◽  
1963 ◽  
Vol 12 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
High Heat ◽  
High Heat Resistance ◽  
Steel Company ◽  
Temperature Performance ◽  
Crucible Steel ◽  
High Degree

Abstract PEERLESS LCT2 is a hot work steel which possesses high heat resistance and a high degree of working hardness at elevated temperatures. This steel is best applied where hardness and resistance to abrasion are of more importance than toughness. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, and machining. Filing Code: TS-140. Producer or source: Crucible Steel Company of America.

HASTELLOY ALLOY C

Alloy Digest ◽  
1956 ◽  
Vol 5 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Oxidation Resistance ◽  
Elevated Temperatures ◽  
Iron Alloy ◽  
Heat Treating ◽  
Temperature Performance

Abstract HASTELLOY alloy-C is a nickel-molybdenum-chromium-iron alloy, highly resistant to strongly oxidizing acids, acid mixtures, and salts as well as chlorine and chlorine-bearing compounds, and with excellent properties as high temperatures. The strength and oxidation resistance at elevated temperatures are also outstanding. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-23. Producer or source: Haynes Stellite Company.

CANNON-MUSKEGON NICKEL ALLOY C

Alloy Digest ◽  
1978 ◽  
Vol 27 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Nickel Alloy ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
Heat Treating ◽  
Oil Refinery ◽  
Nickel Base Alloy ◽  
Temperature Performance ◽  
Nickel Base

Abstract CANNON-MUSKEGON Nickel Alloy C is a cast nickel-base alloy with exceptionally high resistance to corrosion and with excellent high-temperature properties. It also has outstanding oxidation resistance and strength at elevated temperatures. Its many uses include heat-treating equipment, aerospace components and oil-refinery equipment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as casting, heat treating, machining, and joining. Filing Code: Ni-255. Producer or source: Cannon-Muskegon Corporation.

HEPPENSTALL C58

Alloy Digest ◽  
1969 ◽  
Vol 18 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Die Steel ◽  
Temperature Performance ◽  
Alloy Tool ◽  
Very High

Abstract HEPPENSTALL C58 is an alloy tool and die steel furnished in the prehardened and in the annealed conditions. It is used for dies where very high compressive strength and resistance to softening at elevated temperatures are required. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-213. Producer or source: Midvale-Heppenstall Company.

PANDEX VAC ARC

Alloy Digest ◽  
1961 ◽  
Vol 10 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Precipitation Hardening ◽  
Elevated Temperatures ◽  
High Strength ◽  
Heat Treating ◽  
Good Corrosion Resistance ◽  
Temperature Performance

Abstract PANDEX VAC ARC is a precipitation hardening, austenitic, heat resisting alloy designed for service at elevated temperatures where high strength and good corrosion resistance are required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-115. Producer or source: Latrobe Steel.

MST 821

Alloy Digest ◽  
1958 ◽  
Vol 7 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
Heat Treating ◽  
Bend Strength ◽  
Temperature Performance

Abstract MST 821 is a weldable titanium-base alloy having a favorable combination of strength, formability and resistance to creep at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-15. Producer or source: Mallory-Sharon Titanium Corporation.

Sign in / Sign up

Export Citation Format

Share Document