MECASTEEL 145

Alloy Digest ◽  
2014 ◽  
Vol 63 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Steel Grade

Abstract Mecasteel 145 is a steel grade delivered in prehardened condition (yield strength > 1000 MPa, or > 145 ksi) and available in very large dimensions (width 2 m, or 78 in.; thickness up to 635 mm, or 25 in.). This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on forming. Filing Code: SA-703. Producer or source: Industeel USA, LLC. Originally published as Alloy Digest SA-691, February 2014, revised July 2014.

XABO 355

Alloy Digest ◽  
2017 ◽  
Vol 66 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Flat Plate ◽  
Structural Steel ◽  
Tensile Properties ◽  
Impact Test ◽  
Steel Grade ◽  
Minimum Yield

Abstract XABO 355 (minimum yield strength of 355 MPa, or 51 ksi, for thicknesses up to 35 mm, or 1.4 in.) is a thermomechanically rolled structural steel. This datasheet applies to thermomechanically rolled flat plate products in thicknesses up to 60 mm (2.4 in.). This steel grade is distinguished by testing by notch-bar impact test to –20 deg C (-4 deg F) minimum. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming and joining. Filing Code: SA-777. Producer or source: ThyssenKrupp Steel Europe AG.

XABO 460

Alloy Digest ◽  
2017 ◽  
Vol 66 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Flat Plate ◽  
Structural Steel ◽  
Tensile Properties ◽  
Impact Test ◽  
Steel Grade ◽  
Minimum Yield

Abstract XABO 460 (minimum yield strength of 460 MPa, or 67 ksi, for thicknesses up to 35 mm, or 1.4 in.) is a thermomechanically rolled structural steel. This datasheet applies to thermomechanically rolled flat plate products in thicknesses up to 60 mm (2.4 in.). This steel grade is distinguished by testing by notch-bar impact test to –20 deg C (-4 deg F) minimum. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming and joining. Filing Code: SA-778. Producer or source: ThyssenKrupp Steel Europe AG.

VALLOUREC VM 85 13Cr

Alloy Digest ◽  
2016 ◽  
Vol 65 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Carbon ◽  
Sour Service ◽  
Minimum Yield

Abstract Vallourec VM 85 13Cr (minimum yield strength 85 ksi, or 586 MPa) is a low alloy carbon steel for use in oil country tubular goods as a material suitable for sour service. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming. Filing Code: CS-198. Producer or source: Vallourec USA Corporation.

VALLOUREC VM 90 13CR

Alloy Digest ◽  
2016 ◽  
Vol 65 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Carbon ◽  
Sour Service ◽  
Minimum Yield

Abstract Vallourec VM 90 13CR (minimum yield strength 90 ksi, or 620 MPa) is a low alloy carbon steel for use in oil country tubular goods as a material suitable for sour service. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming. Filing Code: CS-197. Producer or source: Vallourec USA Corporation.

RUUKKI RAEX 300

Alloy Digest ◽  
2012 ◽  
Vol 61 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Shear Strength ◽  
Impact Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Structural Components ◽  
Wear Resistant

Abstract RUUKKI RAEX 300 (typical yield strength 900 MPa) is part of the Raex family of high-strength and wear-resistant steels with favorable hardness and impact toughness to extend life and decrease wear in structural components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on wear resistance as well as forming, machining, and joining. Filing Code: SA-643. Producer or source: Rautaruukki Corporation.

STRENX 700

Alloy Digest ◽  
2017 ◽  
Vol 66 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Structural Steel ◽  
Tensile Properties ◽  
High Strength ◽  
Load Bearing ◽  
Minimum Yield

Abstract Strenx 700 is a high-strength structural steel with a minimum yield strength of 650–700 MPa (94–102 ksi) depending on thickness. Strenx 700 meets the requirements of EN 10 025-6 for the S690 grade and thicknesses. Typical applications include demanding load-bearing structures. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on surface qualities as well as forming, machining, and joining. Filing Code: SA-779. Producer or source: SSAB Swedish Steel Inc..

DILLIMAX 690

Alloy Digest ◽  
2012 ◽  
Vol 61 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Structural Steel ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Fine Grained ◽  
Minimum Yield

Abstract Dillimax 550 is a high-strength quenched and tempered, fine-grained structural steel with a minimum yield strength of 690 MPa (100 ksi). Plate is delivered in three qualities: basic, tough, and extra tough. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: SA-652. Producer or source: Dillinger Hütte GTS.

DILLIMAX 500

Alloy Digest ◽  
2012 ◽  
Vol 61 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Structural Steel ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Fine Grained ◽  
High Toughness ◽  
Minimum Yield

Abstract Dillimax 500 is a high-strength quenched and tempered, fine-grained structural steel with a minimum yield strength of 500 MPa (72 ksi). Plate is delivered in three qualities: basic, high toughness, and extra tough. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on surface qualities as well as forming, heat treating, and joining. Filing Code: SA-645. Producer or source: Dillinger Hütte GTS.

HISTAR 355

Alloy Digest ◽  
2015 ◽  
Vol 64 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Shear Strength ◽  
Yield Strength ◽  
Physical Properties ◽  
Structural Steel ◽  
Tensile Properties ◽  
Low Temperatures ◽  
High Yield ◽  
High Yield Strength

Abstract Histar 355 is a structural steel combining high yield strength (355 MPa minimum) with excellent toughness at low temperatures and outstanding weldability. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on forming, machining, and joining. Filing Code: SA-731. Producer or source: ArcelorMittal and ArcelorMittal Luxembourg.

MECASTEEL 90

Alloy Digest ◽  
2014 ◽  
Vol 63 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Hydraulic Systems ◽  
Aisi 4130 ◽  
Minimum Yield

Abstract Mecasteel 90 (minimum yield strength 90 ksi) is a high-strength prehardened steel that can be used in substitution for conventional steels, such as AISI 4130, in the manufacture of massive steel components such as machines, hydraulic systems, and pumps. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on forming and joining. Filing Code: SA-697. Producer or source: Industeel USA, LLC.

Sign in / Sign up

Export Citation Format

Share Document