ACI TYPE HL

Alloy Digest ◽  
1977 ◽  
Vol 26 (6) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Nickel Alloy ◽  
Chromium Content ◽  
Heat Treating ◽  
High Temperature Strength ◽  
Temperature Performance ◽  
Iron Chromium

Abstract Type HL is an austenitic iron-chromium-nickel alloy similar to ACI Type HK (Alloy Digest SS-303, December 1974); however, the higher chromium content of Type HL gives it greater resistance to corrosion by hot gases, particularly those containing appreciable amounts of sulfur. Because essentially equivalent high-temperature strength can be obtained with either the HL or HK grades, the improved corrosion resistance of the HL alloy makes it especially useful for severe service where excessive scaling must be avoided. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-341. Producer or source: Stainless steel foundries.

NIMONIC 81

Alloy Digest ◽  
1987 ◽  
Vol 36 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Alkali Metal ◽  
Physical Properties ◽  
Nickel Alloy ◽  
Heat Treating ◽  
High Temperature Corrosion ◽  
High Temperature Strength ◽  
Temperature Performance ◽  
Enhanced Resistance

Abstract NIMONIC Alloy 81 is a wrought nickel alloy designed to provide enhanced resistance to high-temperature corrosion coupled with good high-temperature strength. It is particularly resistant to attack by deposits of alkali metal sulfates and chlorides resulting from combustion of impure fuels. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-345. Producer or source: Inco Alloys International Inc..

PYRODUR 4910

Alloy Digest ◽  
2018 ◽  
Vol 67 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Temperature Strength ◽  
Temperature Performance

Abstract Pyrodur 4910 is a high-temperature resistant, chromium, nickel, molybdenum, nitrogen, and boron containing austenitic stainless steel. It has superior high-temperature strength and oxidation resistance. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1279. Producer or source: Deutsche Edelstahlwerke GmbH.

NYBY 0908Mo

Alloy Digest ◽  
1962 ◽  
Vol 11 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Heat Treating ◽  
High Temperature Strength ◽  
Good Corrosion Resistance ◽  
Temperature Performance ◽  
Type Stainless Steel

Abstract Nyby 0908Mo is a chromium-molybdenum martensitic type stainless steel having good corrosion resistance with good high temperature strength. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-131. Producer or source: Edstand Brothers Inc. (Agent).

ACI TYPE HI

Alloy Digest ◽  
1959 ◽  
Vol 8 (4) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Temperature Performance ◽  
High Oxidation ◽  
High Oxidation Resistance ◽  
Iron Chromium

Abstract TYPE HI is an iron-chromium-nickel alloy having high oxidation resistance and good strength at elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, and machining. Filing Code: SS-86. Producer or source: Stainless steel foundries.

UNITEMP HX

Alloy Digest ◽  
1964 ◽  
Vol 13 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Base Material ◽  
Heat Treating ◽  
Operating Conditions ◽  
High Temperature Strength ◽  
Temperature Performance ◽  
Nickel Base

Abstract Unitemp-HX is a nickel-base material recommended for high temperature applications. It has outstanding oxidation resistance at high temperatures under most operating conditions, and good high-temperature strength. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-91. Producer or source: Universal Cyclops Steel Corporation.

ACCURATE METAL

Alloy Digest ◽  
1969 ◽  
Vol 18 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance ◽  
Copper Nickel Alloy

Abstract ACCURATE METAL is a copper-nickel alloy having high strength, ductility and corrosion resistance. It was especially designed for exacting electronic and electrical applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Cu-207. Producer or source: Connecticut Metals Corporation.

STOODY 4

Alloy Digest ◽  
1977 ◽  
Vol 26 (4) ◽  
Keyword(s):  
Solid Solution ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Heat Treating ◽  
Tungsten Alloy ◽  
High Temperature Strength ◽  
Cobalt Chromium ◽  
Temperature Performance

Abstract STOODY 4 is a cobalt-chromium-tungsten alloy with excellent high-temperature strength and excellent resistance to corrosion. This alloy derives its high-temperature strength from the high tungsten-to-carbon ratio which allows a large percentage of tungsten to remain in solid solution. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Co-75. Producer or source: WRAP Division, Stoody Company.

SANDVIK 5R75

Alloy Digest ◽  
2000 ◽  
Vol 49 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Intergranular Corrosion ◽  
Heat Treating ◽  
Steel Company ◽  
Temperature Performance

Abstract Sandvik 5R75 is a molybdenum-containing austenitic stainless steel with titanium added to prevent intergranular corrosion by tying up the carbon. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-777. Producer or source: Sandvik Steel Company. Originally published March 2000, corrected November 2000.

AISI TYPE 303 and 303Se

Alloy Digest ◽  
1961 ◽  
Vol 10 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Stainless Steels ◽  
Heat Treating ◽  
Steel Mills ◽  
Temperature Performance ◽  
Aisi Type

Abstract AISI Types 303 and 303 Se austenitic chromium nickel stainless steels to which elements have been added to improve machining and non-seizing characteristics. They are the most readily machinable of all the austenitic chromium nickel grades and are suitable for use in automatic screw machines. They are widely used to minimize seizing and galling. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-126. Producer or source: Stainless steel mills.

ARMCO 21-6-9

Alloy Digest ◽  
1961 ◽  
Vol 10 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
High Strength ◽  
Heat Treating ◽  
Steel Alloy ◽  
Temperature Performance

Abstract Armco 21-6-9 is an austenitic stainless steel alloy designed for use in applications where a combination of high strength and corrosion resistance is desired. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-125. Producer or source: Armco Inc., Eastern Steel Division.

Sign in / Sign up

Export Citation Format

Share Document