CRONIFER 2522 LCN

Alloy Digest ◽  
1983 ◽  
Vol 32 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Carbon Content ◽  
Heat Treating ◽  
Low Carbon ◽  
Corrosion Rates ◽  
Temperature Performance ◽  
Molybdenum Steel

Abstract CRONIFER 2522 LCN is a fully austenitic chromium-nickel-molybdenum steel with an extremely low carbon content (0.020% maximum). It contains 0.10-0.14% nitrogen. It is outstanding because of its very low corrosion rates in the Huey test. CRONIFER 2522 LCN is recommended especially for those parts of urea plants that are subjected to the most corrosive conditions. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-430. Producer or source: Vereingte Deutsche Metallwerke AG.

NICROFER 7216LC

Alloy Digest ◽  
2001 ◽  
Vol 50 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance

Abstract Nicrofer 7216LC is a special low-carbon version of Nicrofer 7216 with carbon at 0.0-25 wt.% maximum. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-568. Producer or source: Krupp VDM.

SANDVIK 3R12

Alloy Digest ◽  
1995 ◽  
Vol 44 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Carbon Content ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance

Abstract Sandvik 3R12 is an austenitic chromium-nickel stainless steel with extra low carbon content. It is superior to Type 302 in corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-612. Producer or source: Sandvik.

CRYONIC 5

Alloy Digest ◽  
1972 ◽  
Vol 21 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Heat Treating ◽  
Temperature Performance ◽  
Heat Treated ◽  
Molybdenum Steel ◽  
International Sales

Abstract CRYONIC 5 is a 5% nickel-0.50% manganese-0.25% molybdenum steel designed and specially heat treated for use in storage vessels at 275 F or lower. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-276. Producer or source: Armco International Sales.

TIMKEN DM-2

Alloy Digest ◽  
1957 ◽  
Vol 6 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Roller Bearing ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance ◽  
Molybdenum Steel

Abstract DM-2 is a low-carbon chromium-molybdenum steel recommended for use at temperatures up to 1100 deg. F. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-58. Producer or source: Timken Roller Bearing Company.

NICKEL 201

Alloy Digest ◽  
1968 ◽  
Vol 17 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance ◽  
Nickel 200 ◽  
Nickel 201

Abstract NICKEL 201 is a low carbon version of Nickel 200 recommended for use in the electronic industries for service at temperatures between 600 F and 1200 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-139. Producer or source: Huntington Alloy Products Division.

AK STEEL 316L

Alloy Digest ◽  
2003 ◽  
Vol 52 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Carbon Content ◽  
Intergranular Corrosion ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance ◽  
Aisi Type ◽  
Type 316L

Abstract AK Steel Type 316L is a Cr-Ni-Mo steel with a very low carbon content (0.03 max). Its general resistance to corrosion is similar to AISI Type 316 (see Alloy Digest SS-865, October 2002) but, because of its low carbon content, it has superior resistance to the formation of harmful carbides that contribute to intergranular corrosion. Type 316L is used widely in many industries such as chemical, food, paper, textile, nuclear, and oil. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-872. Producer or source: AK Steel Corporation.

NIMARK II

Alloy Digest ◽  
1965 ◽  
Vol 14 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Yield Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance

Abstract NiMark II is a vacuum melted low-carbon alloy steel in which yield strength in excess of 250,000 psi can be developed. It is readily weldable and exhibits good ductility at high strength levels and excellent notch ductility. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-184. Producer or source: Carpenter.

NICROFER 5020 HMO (50 PLUS)

Alloy Digest ◽  
2003 ◽  
Vol 52 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Filler Metal ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance

Abstract Nicrofer 5020 hMo (also known as 50 PLUS) is a low-carbon Ni-Cr-Fe-Mo alloy with excellent wet corrosion resistance. The alloy has versatility in use as a wrought alloy or filler metal for lower-alloy materials such as 6–7% Mo stainless steels. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-616. Producer or source: ThyssenKrupp VDM GmbH.

NI-MARK I

Alloy Digest ◽  
1965 ◽  
Vol 14 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
High Strength ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance

Abstract NiMark I is a vacuum melted low-carbon alloy steel in which yield strengths in excess of 240,000 psi can be developed. It is readily weldable and exhibits good ductility at high strength levels. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-177. Producer or source: Carpenter.

UNITEMP 14CMV

Alloy Digest ◽  
1969 ◽  
Vol 18 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Low Carbon ◽  
Welded Structures ◽  
Temperature Performance

Abstract Unitemp 14 CMV is a low carbon, alloy steel recommended for welded structures operating at elevated temperatures up to 1100 F for short periods and at 1000 F for extended service. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-239. Producer or source: Cyclops Corporation.

Sign in / Sign up

Export Citation Format

Share Document