ALLEGHENY LUDLUM TYPE 439

Alloy Digest ◽  
1986 ◽  
Vol 35 (6) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
Stress Corrosion Cracking ◽  
High Resistance ◽  
Heat Treating ◽  
High Level ◽  
Chloride Stress Corrosion Cracking

Abstract ALLEGHENY LUDLUM TYPE 439 is a stainless steel with a high resistance to chloride stress-corrosion cracking. It also has a high level of general resistance in steam and fresh-water environments. Its high level of chromium provides resistance to sulfidation and oxidation. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-470. Producer or source: Allegheny Ludlum Corporation.

VALINOX VLX 439L

Alloy Digest ◽  
1992 ◽  
Vol 41 (6) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
Fresh Water ◽  
Stress Corrosion Cracking ◽  
Heat Treating ◽  
Low Carbon ◽  
Boiler Water

Abstract VALINOX VLX 439L is a ferritic stainless steel with 18% chromium, low carbon, and titanium stabilization to present an entirely ferritic structure; resistance to corrosion in fresh water, boiler water, and cooling waters; and an almost freedom from stress-corrosion cracking problems due to chlorinated water. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: SS-531. Producer or source: Vallourec Inc..

JETHETE M.160

Alloy Digest ◽  
1959 ◽  
Vol 8 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Stress Corrosion Cracking ◽  
High Resistance ◽  
Heat Treating ◽  
Resistance To Stress

Abstract JETHETE M.160 is a 12% chromium air hardening alloy steel having high resistance to stress-corrosion cracking. It is recommended for use at temperatures approaching 1200 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-85. Producer or source: Samuel Fox & Company Ltd, Stocksbridge Works.

AMBRONZE 413

Alloy Digest ◽  
1969 ◽  
Vol 18 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
Stress Corrosion Cracking ◽  
Electrical Contact ◽  
Heat Treating ◽  
Corrosion Cracking ◽  
Tin Bronze

Abstract AMBRONZE 413 is a copper-tin bronze recommended for plater's plates and electrical contact springs. It is relatively immune to stress-corrosion cracking. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-201. Producer or source: Anaconda American Brass Company.

NAS 825

Alloy Digest ◽  
2012 ◽  
Vol 61 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Stress Corrosion Cracking ◽  
Chloride Ion ◽  
Heat Treating ◽  
Corrosion Cracking ◽  
Corrosion Resistant

Abstract NAS 825 is a corrosion-resistant nickel alloy that has resistance to both oxidizing and reducing environments, and with 42% nickel, the alloy is very resistant to chloride-ion stress-corrosion cracking. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-694. Producer or source: Nippon Yakin Kogyo Company Ltd.

SEA CURE

Alloy Digest ◽  
1979 ◽  
Vol 28 (5) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Ferritic Stainless Steel ◽  
High Resistance ◽  
Brackish Water ◽  
Crevice Corrosion ◽  
Heat Treating

Abstract SEA-CURE is a ferritic stainless steel designed to provide high resistance to pitting and crevice corrosion in condensers cooled by saline or brackish water. It is used for condenser tubes and has great potential for many other uses. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-364. Producer or source: Trent Tube.

UNILOY 326

Alloy Digest ◽  
1970 ◽  
Vol 19 (7) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Distinct Advantage ◽  
Two Phase ◽  
Stress Corrosion Resistance

Abstract UNILOY 326 is a two-phase, ferromagnetic stainless steel characterized by high strength and very good general and stress corrosion resistance. It has distinct advantage for the fastener industry. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-241. Producer or source: Cyclops.

CRUCIBLE 26-1

Alloy Digest ◽  
1975 ◽  
Vol 24 (2) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
Intergranular Corrosion ◽  
Heat Treating ◽  
High Chromium ◽  
Furnace Melting ◽  
Chromium Stainless Steel

Abstract Crucible 26-1 is a fully ferritic, titanium-stabilized, high-chromium stainless steel characterized by outstanding resistance to pitting and stress corrosion in chloride-containing environments. The steel is weldable and very resistant to intergranular corrosion after welding. It is produced by electric-furnace melting and AOD (Argon-Oxygen Deoxidation) refining. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-306. Producer or source: Crucible Stainless Steel Division, Colt Industries.

NAS 64

Alloy Digest ◽  
2010 ◽  
Vol 59 (8) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Duplex Stainless Steel ◽  
Stress Corrosion Cracking ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Duplex Microstructure ◽  
Resistance To Stress

Abstract NAS 64 is a duplex stainless steel with molybdenum for pitting and crevice corrosion resistance and a duplex microstructure for resistance to stress-corrosion cracking. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1072. Producer or source: Nippon Yakin Kogyo Company Ltd.

SANICRO 70

Alloy Digest ◽  
1995 ◽  
Vol 44 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
Hydrogen Chloride ◽  
Stress Corrosion Cracking ◽  
Chloride Ion ◽  
Heat Treating ◽  
Temperature Resistance

Abstract SANDVIK SANICRO 70 is an austenitic alloy with good high temperature resistance to carburization and nitridation. The alloy is also very resistant to chloride-ion stress-corrosion cracking and to hydrogen chloride. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating and joining. Filing Code: Ni-483. Producer or source: Sandvik.

MONEL ALLOY 450

Alloy Digest ◽  
1988 ◽  
Vol 37 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
Stress Corrosion Cracking ◽  
Heat Treating ◽  
Corrosion Cracking ◽  
Minor Elements ◽  
Fouling Organisms

Abstract MONEL alloy 450 is a 70-30 cupro-nickel with certain minor elements controlled to improve weldability. The alloy resists attachment of bio-fouling organisms. It resists stress-corrosion cracking in seawater environments. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-534. Producer or source: Inco Alloys International Inc..

Sign in / Sign up

Export Citation Format

Share Document