CRUCIBLE CPM 420V

Alloy Digest ◽  
1999 ◽  
Vol 48 (1) ◽  
Keyword(s):  
Wear Resistance ◽  
Corrosion Resistance ◽  
Martensitic Stainless Steel ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Primary Concern ◽  
Good Corrosion Resistance ◽  
Wear And Corrosion ◽  
Excellent Candidate ◽  
Wear And Corrosion Resistance

Abstract Crucible CPM 420V is a unique tool steel made by the Crucible particle metallurgy (CPM) process. The alloy is designed from a martensitic stainless steel based analysis with added carbon and vanadium for exceptionally good wear resistance. CPM 420V offers significant improvements over CPM 440V in both wear and corrosion resistance. The exceptional wear resistance and good corrosion resistance of CPM 420V make it an excellent candidate to replace 440C and other corrosion- and wear-resistant materials, particularly where increased wear resistance is a primary concern. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on corrosion and wear resistance as well as heat treating and machining. Filing Code: SS-736. Producer or source: Crucible Service Centers.

CRUCIBLE CPM S30V

Alloy Digest ◽  
2003 ◽  
Vol 52 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Martensitic Stainless Steel ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Better Than

Abstract Crucible CPM S30V is a martensitic stainless steel designed with a combination of toughness, wear resistance, and corrosion resistance equal to or better than 440C. This datasheet provides information on composition, physical properties, microstructure, hardness, and elasticity as well as fracture toughness. It also includes information on corrosion and wear resistance as well as heat treating and machining. Filing Code: SS-891. Producer or source: Crucible Service Centers.

CARPENTER CTS B75P ALLOY

Alloy Digest ◽  
2015 ◽  
Vol 64 (1) ◽  
Keyword(s):  
Stainless Steel ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Martensitic Stainless Steel ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Powder Metal

Abstract Carpenter CTS-B75P alloy is a powder metal processed, air-hardening, martensitic stainless steel that offers corrosion resistance comparable with Type 440C stainless combined with excellent wear resistance and tempered hardness capability up to HRC 63. This datasheet provides information on composition, physical properties, and hardness. It also includes information on corrosion and wear resistance as well as forming, heat treating, machining, and powder metal forms. Filing Code: SS-1200. Producer or source: Carpenter Specialty Alloys.

UGI 4418

Alloy Digest ◽  
2018 ◽  
Vol 67 (8) ◽  
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Martensitic Stainless Steel ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Temperature Performance ◽  
Excellent Corrosion Resistance

Abstract UGI 4418 is a martensitic stainless steel with excellent corrosion resistance in aggressive environments combined with good mechanical properties, including toughness. It exhibits excellent cryogenic properties. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on high temperature performance, corrosion and wear resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1292. Producer or source: Schmolz + Bickenbach USA Inc..

UHB STAINLESS AEB-L

Alloy Digest ◽  
1980 ◽  
Vol 29 (2) ◽  
Keyword(s):  
Stainless Steel ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Chemical Composition ◽  
Cutting Tool ◽  
Martensitic Stainless Steel ◽  
Heat Treating ◽  
Good Corrosion Resistance ◽  
Manufacturing Operations ◽  
Edge Sharpness

Abstract UHB Stainless AEB-L is a hardenable (martensitic) stainless steel developed for the demanding requirements of razor blades. It is now finding wide use for other articles with cutting edges, such as knives and scissors. It has an ideal, closely controlled chemical composition and is supplied in a condition that provides good results in manufacturing operations. It gives a cutting tool with a first-class edge characterized by (1) High initial sharpness, (2) Lasting edge sharpness, (3) Good edge retention and wear resistance and (4) Good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-371. Producer or source: Uddeholm Aktiebolag.

TANTUNG G

Alloy Digest ◽  
1961 ◽  
Vol 10 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Cutting Tools ◽  
Heat Treating ◽  
Nonferrous Alloy ◽  
Wear And Corrosion ◽  
Wear And Corrosion Resistance

Abstract TANTUNG G is a cast nonferrous alloy containing tantalum or columbium carbide and having wear and corrosion resistance. It is used primarily for cutting tools. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Co-28. Producer or source: Vascoloy, Ramet Division.

CARPENTER ACUBE 100 ALLOY

Alloy Digest ◽  
2009 ◽  
Vol 58 (9) ◽  
Keyword(s):  
Wear Resistance ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloys ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Beryllium Copper ◽  
Direct Replacement ◽  
Cobalt Base

Abstract Carpenter ACUBE 100 Alloy is cobalt-base and exhibits corrosion resistance and wear resistance. The alloy was designed as direct replacement of beryllium copper alloys. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion and wear resistance as well as forming, heat treating, and machining. Filing Code: CO-117. Producer or source: Carpenter Specialty Alloys.

CTS-BD30P ALLOY

Alloy Digest ◽  
2013 ◽  
Vol 62 (8) ◽  
Keyword(s):  
Stainless Steel ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Martensitic Stainless Steel ◽  
Heat Treating ◽  
Powder Metal ◽  
High Concentration ◽  
Vanadium Carbides

Abstract Carpenter CTS-BD30P alloy is a powder metal processed, air-hardening, martensitic stainless steel that offers corrosion resistance comparable with Type 440C stainless, combined with excellent toughness and wear resistance attributed to a high concentration of vanadium carbides. The Carpenter CTS family of alloys is used for many blade applications. This datasheet provides information on composition and physical properties. It also includes information on corrosion resistance as well as heat treating and powder metal forms. Filing Code: SS-1154. Producer or source: Carpenter Specialty Alloys.

ALLEGHENY LUDLUM TYPE 420

Alloy Digest ◽  
2000 ◽  
Vol 49 (8) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Wear And Corrosion ◽  
Wear And Corrosion Resistance ◽  
Chromium Stainless Steel

Abstract Allegheny Ludlum Type 420 is a hardenable, straight-chromium stainless steel with wear and corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: SS-801. Producer or source: Allegheny Ludlum Corporation.

DURCOMET 100

Alloy Digest ◽  
1993 ◽  
Vol 42 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Mechanical Strength ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Annealed Condition ◽  
Excellent Corrosion Resistance ◽  
Wide Range ◽  
Very High

Abstract Durcomet 100 is an improved version of Alloy CD-4 MCu with better corrosion and wear resistance. The alloy is used in the annealed condition and possesses excellent corrosion resistance over a wide range of corrosion environments. Mechanical strength is also very high. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating and joining. Filing Code: SS-540. Producer or source: Duriron Company Inc.

FIRTH-VICKERS F.V.520B

Alloy Digest ◽  
1965 ◽  
Vol 14 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Stainless Steels ◽  
Martensitic Stainless Steel ◽  
Turbine Blades ◽  
Heat Treating ◽  
Good Corrosion Resistance ◽  
Temperature Performance ◽  
Temperature Heat ◽  
Steam Turbine Blades ◽  
Temperature Heat Treatment

Abstract F.V.520B is an improved martensitic stainless steel which has good corrosion resistance, weldability, and capacity of being hardened by low temperature heat treatment. It is recommended for steam turbine blades and aircraft components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-166. Producer or source: Firth-Vickers Stainless Steels Ltd.

Sign in / Sign up

Export Citation Format

Share Document