NAS 254 NM

Alloy Digest ◽  
2011 ◽  
Vol 60 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Molybdenum Content ◽  
High Chromium ◽  
Corrosive Environments

Abstract NAS 254 NM has high chromium and molybdenum content and thus is resistant to harsh corrosive environments. The alloy is available in flat products. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1083. Producer or source: Nippon Yakin Kogyo Company Ltd.

NICROFER 3033

Alloy Digest ◽  
2004 ◽  
Vol 53 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Chromium ◽  
Temperature Performance ◽  
Mineral Acids ◽  
Mixed Acids

Abstract Nicrofer 3033 is a high-chromium austenitic material for service in hot mineral acids and mixed acids. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-508. Producer or source: VDM Technologies Corporation. Originally published April 1996, revised February 2004. See also Alloy Digest SS-687, July 1997.

URANUS 76N

Alloy Digest ◽  
2009 ◽  
Vol 58 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Localized Corrosion ◽  
High Chromium ◽  
Equivalent Number ◽  
Nitrogen Contents

Abstract URANUS 76N contains high chromium, molybdenum, and nitrogen contents and has a pitting resistance equivalent number (PREN) ≥ 40. These factors explain why the duplex austenitic/ferritic stainless grade is very resistant to localized corrosion. The alloy has been used for offshore applications. This datasheet provides information on composition, physical properties, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1028. Producer or source: Industeel USA, LLC.

CRUCIBLE 26-1

Alloy Digest ◽  
1975 ◽  
Vol 24 (2) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
Intergranular Corrosion ◽  
Heat Treating ◽  
High Chromium ◽  
Furnace Melting ◽  
Chromium Stainless Steel

Abstract Crucible 26-1 is a fully ferritic, titanium-stabilized, high-chromium stainless steel characterized by outstanding resistance to pitting and stress corrosion in chloride-containing environments. The steel is weldable and very resistant to intergranular corrosion after welding. It is produced by electric-furnace melting and AOD (Argon-Oxygen Deoxidation) refining. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-306. Producer or source: Crucible Stainless Steel Division, Colt Industries.

CALITE B-29

Alloy Digest ◽  
1958 ◽  
Vol 7 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Casting Alloy ◽  
High Chromium ◽  
Heat Resistant ◽  
Temperature Performance

Abstract CALITE B-29 is a high chromium-nickel heat resistant casting alloy having excellent oxidation and carburization resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-76. Producer or source: Calorizing Company.

OUTOKUMPU MODA 410L/4003

Alloy Digest ◽  
2020 ◽  
Vol 69 (12) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Ferritic Stainless Steel ◽  
Low Cost ◽  
Heat Treating ◽  
Low Carbon ◽  
Alloy Steels ◽  
Corrosive Environments

Abstract Outokumpu Moda 410L/4003 is a weldable, extra low carbon, Cr-Ni, ferritic stainless steel that is best suited for mildly corrosive environments such as indoors, where the material is either not exposed to contact with water or gets regularly wiped dry, or outdoors, where some discoloration and superficial rusting are acceptable. It is a low-cost alternative to low-carbon non-alloy steels in certain applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1330. Producer or source: Outokumpu Oyj.

OUTOKUMPU MODA 410S/4000

Alloy Digest ◽  
2020 ◽  
Vol 69 (11) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
Good Resistance ◽  
Temperature Performance ◽  
Corrosive Environments

Abstract Outokumpu Moda 410S/4000 is a 13% Cr, ferritic stainless steel that is used in applications requiring good resistance to mildly corrosive environments. It is a low carbon, non-hardening modification of Type 410 stainless steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1329. Producer or source: Outokumpu Oyj.

CN-3MN

Alloy Digest ◽  
1998 ◽  
Vol 47 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Molybdenum Content

Abstract CN-3MN is the cast version of AL-6XN wrought alloy UNS N08367 (see Alloy Digest SS-494). The alloy has a high molybdenum content and provides excellent pitting and crevice corrosion resistance to all waters. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on casting, heat treating, and joining. Filing Code: SS-701. Producer or source: Allegheny Ludlum Corporation. Originally published November 1997, revised January 1998.

CARLSON ALLOY C200 and C201

Alloy Digest ◽  
1994 ◽  
Vol 43 (6) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Hydrogen Chloride ◽  
Stainless Steels ◽  
Nickel Alloys ◽  
Heat Treating ◽  
Electrical Conductivities ◽  
Corrosive Environments

Abstract Carlson Alloys C200 and C201 are wrought forms of nickel with carbon the only difference in composition. The metal has excellent resistance to dry chlorine and hydrogen chloride and caustic alkalis. The alloys combine good mechanical properties with excellent resistance to corrosive environments. Thermal and electrical conductivities are considerably higher than stainless steels or nickel alloys they possess. Excellent ductility at sub-zero temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-456. Producer or source: G.O. Carlson Inc.

ABEX PACE

Alloy Digest ◽  
1985 ◽  
Vol 34 (4) ◽  
Keyword(s):  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Iron Alloy ◽  
High Chromium ◽  
Acid Ph ◽  
Ph Range ◽  
Corrosive Environments

Abstract ABEX PACE is a modified high-chromium iron alloy. Its composition is balanced to achieve a unique microstructure. PACE (Protection Against Corrosion/Erosion) was developed to replace stainless steels and abrasion-resistant alloys in applications where abrasive and corrosive environments exist simultaneously. Its predecessor, ABEX SPA ALLOY (Alloy Digest CI-47, January 1979), achieved remarkable results in a limited acid pH range, but the PACE alloy extends these properties to all environments, and incorporates enhanced machinability. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and compressive strength. It also includes information on corrosion resistance as well as joining. Filing Code: CI-52. Producer or source: Abex Corporation, Engineered Products Division.

UNILOY 1430MV

Alloy Digest ◽  
1960 ◽  
Vol 9 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Chromium ◽  
Temperature Performance

Abstract UNILOY 1430MV is a high-chromium, molybdenum heat and corrosion resisting steel used for highly stressed parts involving service temperatures up to 1000 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-102. Producer or source: Cyclops Corporation.

Sign in / Sign up

Export Citation Format

Share Document