ABEX PACE

Alloy Digest ◽  
1985 ◽  
Vol 34 (4) ◽  
Keyword(s):  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Iron Alloy ◽  
High Chromium ◽  
Acid Ph ◽  
Ph Range ◽  
Corrosive Environments

Abstract ABEX PACE is a modified high-chromium iron alloy. Its composition is balanced to achieve a unique microstructure. PACE (Protection Against Corrosion/Erosion) was developed to replace stainless steels and abrasion-resistant alloys in applications where abrasive and corrosive environments exist simultaneously. Its predecessor, ABEX SPA ALLOY (Alloy Digest CI-47, January 1979), achieved remarkable results in a limited acid pH range, but the PACE alloy extends these properties to all environments, and incorporates enhanced machinability. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and compressive strength. It also includes information on corrosion resistance as well as joining. Filing Code: CI-52. Producer or source: Abex Corporation, Engineered Products Division.

CARLSON ALLOY C200 and C201

Alloy Digest ◽  
1994 ◽  
Vol 43 (6) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Hydrogen Chloride ◽  
Stainless Steels ◽  
Nickel Alloys ◽  
Heat Treating ◽  
Electrical Conductivities ◽  
Corrosive Environments

Abstract Carlson Alloys C200 and C201 are wrought forms of nickel with carbon the only difference in composition. The metal has excellent resistance to dry chlorine and hydrogen chloride and caustic alkalis. The alloys combine good mechanical properties with excellent resistance to corrosive environments. Thermal and electrical conductivities are considerably higher than stainless steels or nickel alloys they possess. Excellent ductility at sub-zero temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-456. Producer or source: G.O. Carlson Inc.

DURIRON

Alloy Digest ◽  
1992 ◽  
Vol 41 (11) ◽  
Keyword(s):  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Corrosion Resistant ◽  
High Silicon

Abstract DURIRON is a high-silicon corrosion resistant iron alloy useful in the handling and carrying of corrosive liquids, wastes, and gases. This datasheet provides information on composition, physical properties, hardness, tensile properties, and compressive strength. It also includes information on corrosion resistance as well as machining and joining. Filing Code: Fe-5. Producer or source: The Duriron Company Inc.. Originally published May 1954, revised November 1992.

CIMET

Alloy Digest ◽  
1960 ◽  
Vol 9 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
High Chromium ◽  
Temperature Performance

Abstract CIMET is a low nickel, high chromium-iron alloy suitable for sulfur-bearing fuel applications. It is resistant to heat, corrosion, and abrasion. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-107. Producer or source: Driver-Harris Company.

NAS 254 NM

Alloy Digest ◽  
2011 ◽  
Vol 60 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Molybdenum Content ◽  
High Chromium ◽  
Corrosive Environments

Abstract NAS 254 NM has high chromium and molybdenum content and thus is resistant to harsh corrosive environments. The alloy is available in flat products. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1083. Producer or source: Nippon Yakin Kogyo Company Ltd.

NIROMET 46

Alloy Digest ◽  
1969 ◽  
Vol 18 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
Nickel Iron ◽  
Nickel Iron Alloy ◽  
Glass Seals

Abstract Niromet 46 is a 46% nickel-iron alloy having low and controlled coefficient of expansion. It is recommended for metal-to-glass seals and terminal bands in vitreous enameled resistors. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Fe-39. Producer or source: Wilbur B. Driver Company.

FEDERALOY F-1

Alloy Digest ◽  
1954 ◽  
Vol 3 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Temperature Performance

Abstract Federaloy F-1 is a copper tin-zinc bearing bronze whose strength suits it for applications where loads are heavy. It should be used only where lubrication is exceptionally good or motion is of a rocking nature. It is also a good gear bronze. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness, creep, and deformation. It also includes information on high temperature performance and corrosion resistance as well as casting, machining, and joining. Filing Code: Cu-19. Producer or source: Federal-Mogul Corporation.

COPPER ALLOY No. C93500

Alloy Digest ◽  
1982 ◽  
Vol 31 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Corrosion Resistant ◽  
Low Strength

Abstract Copper Alloy No. C93500 is a cast bronze containing nominally 9% lead and 5% tin. It has excellent machinability, low strength and good resistance to corrosion. It is used for corrosion-resistant castings, small bearings and bushings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-439. Producer or source: Copper alloy foundries.

G-30 FILLER METAL

Alloy Digest ◽  
1993 ◽  
Vol 42 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Filler Metal ◽  
Weld Repair ◽  
Weld Overlay ◽  
High Chromium ◽  
Cast Products

Abstract Hastelloy Alloy G-30 filler metal is used as matching composition filler metal for fabrication of Hastelloy G-30 wrought and cast products and as filler metal for fabrication of G/G-3 alloy wrought products. It is also used for weld repair of high chromium castings and for weld overlay cladding. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as joining. Filing Code: Ni-432. Producer or source: Haynes International Inc.

PROMET 6

Alloy Digest ◽  
1970 ◽  
Vol 19 (7) ◽  
Keyword(s):  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Lead

Abstract PROMET 6 is produced in three grades: PROMET 6, PROMET 6 SK and PROMET 6 CR. These alloys comprise a series of high-lead tin bronzes, traditionally known as the bearing bronzes. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Cu-218. Producer or source: American Crucible Products Company.

MAGNIFER 36K

Alloy Digest ◽  
1996 ◽  
Vol 45 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Electrical Resistance ◽  
Iron Alloy ◽  
Heat Treating ◽  
Soft Magnetic ◽  
Nickel Iron ◽  
Saturation Induction ◽  
Nickel Iron Alloy

Abstract Magnifer 36K is a soft-magnetic nickel-iron alloy with 36% nickel. It has a saturation induction of 1.3 T and a rather high electrical resistance of 0.75 ohm mm2/m. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: FE-110. Producer or source: VDM Technologies Corporation.

Sign in / Sign up

Export Citation Format

Share Document