CANNON-MUSKEGON H-21

Alloy Digest ◽  
1972 ◽  
Vol 21 (8) ◽  
Keyword(s):  
Physical Properties ◽  
Tool Steel ◽  
Abrasion Resistance ◽  
Heat Treating ◽  
Hot Work Tool Steel ◽  
Operating Temperatures ◽  
Red Hardness

Abstract CANNON-MUSKEGON H-21 is a tough, air-hardening, hot-work tool steel with excellent red hardness and abrasion resistance for high operating temperatures. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on casting, heat treating, machining, and joining. Filing Code: TS-245. Producer or source: Cannon-Muskegon Corporation.

CARPENTER No. 882

Alloy Digest ◽  
1978 ◽  
Vol 27 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Temperature Performance ◽  
Hot Work Tool Steel ◽  
Red Hardness

Abstract CARPENTER No. 882 is a 5% chromium hot-work tool steel designed particularly for applications requiring extreme toughness combined with good red hardness. It also has found cold-work applications. It can be used at strength levels in excess of 260,000 psi (18,300 kg/cm2). This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-339. Producer or source: Carpenter.

CRUCIBLE CPM REX 54 HS

Alloy Digest ◽  
2021 ◽  
Vol 70 (9) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tool Steel ◽  
Abrasion Resistance ◽  
High Speed ◽  
Heat Treating ◽  
Wear Properties ◽  
Red Hardness

Abstract Crucible CPM Rex 54 HS is a cobalt-bearing high speed tool steel that is produced by the proprietary Crucible Particle Metallurgy (CPM) process. It combines the wear properties of the popular high vanadium M4 grade with the red hardness of the cobalt-bearing M35/Crucible CPM Rex 45 HS grades. Crucible CPM Rex 54 HS may be used as an upgrade for improved red hardness over M3 or M4 without giving up the abrasion resistance, or as an upgrade for improved wear resistance over M35 or Crucible CPM Rex 45 HS without giving up the red hardness. This datasheet provides information on composition, physical properties, microstructure, hardness, and elasticity. It also includes information on wear resistance as well as heat treating and surface treatment. Filing Code: TS-818. Producer or source: Crucible Industries LLC.

JESSOP-SAVILLE JO. SPECIAL

Alloy Digest ◽  
1967 ◽  
Vol 16 (7) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Abrasion Resistance ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Extrusion Dies ◽  
Temperature Performance ◽  
Red Hardness

Abstract Jessop-Saville JO. Special is a basic hot work tool steel exhibiting good red-hardness and abrasion resistance at elevated temperatures. It is recommended for forging and extrusion dies. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as heat treating, machining, and joining. Filing Code: TS-195. Producer or source: Jessop-Saville Ltd, Brightside Works.

FAGERSTA D-66

Alloy Digest ◽  
1968 ◽  
Vol 17 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Abrasion Resistance ◽  
Hot Extrusion ◽  
Heat Treating ◽  
Die Steel ◽  
Operating Temperatures ◽  
Red Hardness

Abstract FAGERSTA-D66 is a 9% tungsten type hot-work tool and die steel having excellent combination of abrasion resistance, red-hardness and toughness at high operating temperatures. It is recommended for hot extrusion and forming dies, punches, rivet sets, shear blades, etc. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-202. Producer or source: Fagersta Steels Inc..

CANNON-MUSKEGON H-12

Alloy Digest ◽  
1973 ◽  
Vol 22 (5) ◽  
Keyword(s):  
Physical Properties ◽  
Tool Steel ◽  
Silicon Content ◽  
Cast Steel ◽  
Heat Treating ◽  
Austenitizing Temperature ◽  
Red Hardness

Abstract CANNON-MUSKEGON H-12 is an air-hardening hot-work cast tool steel used for applications requiring good toughness combined with good red hardness. The alloy will harden from a relatively low austenitizing temperature. A higher silicon content is permissable in this cast steel than in AISI H-12 (wrought) tool steel. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on casting, heat treating, machining, and joining. Filing Code: TS-255. Producer or source: Cannon-Muskegon Corporation.

CANNON-MUSKEGON H-11

Alloy Digest ◽  
1973 ◽  
Vol 22 (3) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Silicon Content ◽  
Cast Steel ◽  
Heat Treating ◽  
Red Hardness ◽  
The Sacrifice

Abstract CANNON-MUSKEGON H-11 is an air-hardening hot-work cast tool steel used for hot applications requiring good toughness combined with good red-hardness and for cold applications where toughness is required at the sacrifice of some wear. A higher silicon content is permissable in this cast steel than in AISI H-11 (wrought) tool steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on casting, heat treating, machining, and joining. Filing Code: TS-251. Producer or source: Cannon-Muskegon Corporation.

CANNON-MUSKEGON H19

Alloy Digest ◽  
1972 ◽  
Vol 21 (6) ◽  
Keyword(s):  
Physical Properties ◽  
Tool Steel ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Hot Work Tool Steel ◽  
Hot Hardness

Abstract CANNON-MUSKEGON H-19 is an air-hardening, tough, hot-work tool steel that has excellent resistance to shock and abrasion at elevated temperatures while maintaining good hot hardness. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on casting, heat treating, machining, and joining. Filing Code: TS-244. Producer or source: Cannon-Muskegon Corporation.

GUTERL H-11

Alloy Digest ◽  
1983 ◽  
Vol 32 (3) ◽  
Keyword(s):  
Physical Properties ◽  
Surface Treatment ◽  
Tool Steel ◽  
Heat Treating ◽  
Work Characteristics ◽  
Jet Engines ◽  
Shock Resistance ◽  
Structural Parts ◽  
Red Hardness ◽  
The Many

Abstract GUTERL H-11 is a 5% chromium hot-work tool steel with an excellent combination of red hardness, shock resistance (toughness) and resistance to abrasion; these are the properties needed for good hot-work characteristics. It will withstand drastic cooling from maximum operating temperatures. Among the many uses for this steel are hot-die applications, structural parts for jet engines and missiles, extrusion mandrels and forging dies. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: TS-412. Producer or source: Guterl Special Steel Corporation.

LSS H21

Alloy Digest ◽  
2013 ◽  
Vol 62 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Steel Company ◽  
Hot Work Tool Steel ◽  
Specialty Steel

Abstract LSS H21 is a hot work tool steel recommended for difficult hot work tooling applications. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on heat treating and machining. Filing Code: TS-713. Producer or source: Latrobe Specialty Steel Company.

THYROTHERM 2885

Alloy Digest ◽  
2008 ◽  
Vol 57 (3) ◽  
Keyword(s):  
Heavy Metals ◽  
High Temperature ◽  
Physical Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Temperature Performance ◽  
Hot Work Tool Steel

Abstract Thyrotherm 2885 is a hot-work tool steel used mainly as extrusion tooling for heavy metals. This datasheet provides information on composition, physical properties, and hardness as well as creep. It also includes information on high temperature performance as well as forming and heat treating. Filing Code: TS-662. Producer or source: Schmolz + Bickenbach USA Inc.

Sign in / Sign up

Export Citation Format

Share Document