SUPER MOTUNG 33

Alloy Digest ◽  
1977 ◽  
Vol 26 (8) ◽  
Keyword(s):  
Physical Properties ◽  
Surface Treatment ◽  
High Speed ◽  
High Hardness ◽  
Heat Treating ◽  
Heavy Duty

Abstract SUPER MOTUNG 33 is one of the heavy-duty high-speed steels. It is recommended for machining materials of high hardness. This datasheet provides information on composition, physical properties, and hardness. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-322. Producer or source: Cyclops Corporation.

GUTERL M-1

Alloy Digest ◽  
1981 ◽  
Vol 30 (12) ◽  
Keyword(s):  
Physical Properties ◽  
Surface Treatment ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Heavy Duty ◽  
Red Hardness ◽  
Circular Saws ◽  
Twist Drills

Abstract GUTERL M-1 is a highly-molybdenum, low-tungsten type of high-speed tool steel. It is a general-purpose high-speed steel with an excellent combination of cutting ability, finishing characteristics and toughness. Guterl M-1 has good cutting ability for all operations except for heavy-duty, continuous cutting applications that require the ultimate in red hardness. Its toughness is as great as that of other high-speed steels. Its typical uses include circular saws, broaches, gear cutters, twist drills and taps. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: TS-391. Producer or source: Guterl Special Steel Corporation.

FAGERSTA M-1

Alloy Digest ◽  
1979 ◽  
Vol 28 (2) ◽  
Keyword(s):  
Physical Properties ◽  
Surface Treatment ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
Heavy Duty ◽  
Twist Drills

Abstract FAGERSTA M-1 is a high-molybdenum, low-tungsten type of high-speed steel. It has good cutting ability, except for heavy-duty, continuous cutting operations where ultimate re-hardness is required. Its numerous uses include boring tools, gear cutters, milling cutters and twist drills. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-345. Producer or source: Fagersta Steels Inc..

ENPLATE NI-423

Alloy Digest ◽  
1986 ◽  
Vol 35 (11) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Speed ◽  
Chemical Reduction ◽  
Electronic Devices ◽  
Electroless Nickel ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Phosphorus Alloy

Abstract ENPLATE NI-423 is a nickel-phosphorus alloy deposited by chemical reduction without electric current. It is deposited by a stable, relatively high-speed functional electroless nickel process that produces a low-stress coating with good ductility and excellent resistance to corrosion. Its many uses include equipment for chemicals and food, aerospace components, molds and electronic devices. This datasheet provides information on composition, physical properties, and hardness. It also includes information on corrosion and wear resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: Ni-343. Producer or source: Enthone Inc..

ELECTRITE COBALT

Alloy Digest ◽  
1960 ◽  
Vol 9 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
High Speed ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Heat Treating ◽  
Heavy Duty ◽  
Steel Company

Abstract ELECTRITE COBALT is a 5% cobalt type high-speed steel recommended for heavy duty cutting tools. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-89. Producer or source: Latrobe Steel Company.

DOUBLE SEVEN

Alloy Digest ◽  
1962 ◽  
Vol 11 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Cold Working ◽  
High Hardness ◽  
Heat Treating ◽  
Heavy Duty ◽  
High Carbon ◽  
Die Steel ◽  
High Chromium

Abstract DOUBLE SEVEN is an air hardening high-carbon high-chromium tool and die steel having high hardness and wear resistance. It is recommended for shear blades, cold working tools, and heavy duty dies. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-124. Producer or source: Edgar Allen & Company Ltd, Imperial Steel Works.

VASCO M-50

Alloy Digest ◽  
1974 ◽  
Vol 23 (11) ◽  
Keyword(s):  
Elevated Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Speed ◽  
High Speed Steel ◽  
High Strength ◽  
Heat Treating ◽  
High Load ◽  
Aisi 52100 ◽  
Aisi 52100 Steel

Abstract VASCO M-50 is a hardenable (martensitic), low-alloy high-speed steel developed primarily for high-strength, high-load components (such as bearings and gears) designed for elevated-temperature service. It may be used at temperatures up to 600 F; this is in contrast to AISI 52100 steel which may be used up to only 350 F. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: TS-278. Producer or source: Teledyne Vasco.

AISI 8627

Alloy Digest ◽  
1980 ◽  
Vol 29 (12) ◽  
Keyword(s):  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Heavy Duty ◽  
Good Strength ◽  
Steel Mills ◽  
Hot Rolled ◽  
Strength And Toughness

Abstract AISI 8627 is an alloy steel of moderate-to-good hardenability for carburizing and other applications. When carburized, its core has good strength and toughness, and it is recommended for heavy-duty applications such as gears, shafts, cams, and machinery parts. Also, it can be used in the hot-rolled, normalized or water-quenched-and-tempered condition without carburizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-379. Producer or source: Alloy steel mills and foundries.

ALLEGHENY LUDLUM STAINLESS TYPE 440A

Alloy Digest ◽  
1955 ◽  
Vol 4 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Hardness ◽  
Heat Treating ◽  
Chromium Steel ◽  
High Carbon

Abstract ALLEGHENY LUDLUM STAINLESS TYPE 440A is a hardenable high-carbon chromium steel designed to provide stainless properties with high hardness. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-38. Producer or source: Allegheny Ludlum Corporation.

CYCLOPS M4

Alloy Digest ◽  
1978 ◽  
Vol 27 (7) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Abrasion Resistance ◽  
High Speed ◽  
Heat Treating ◽  
Heavy Duty ◽  
Maximum Hardness ◽  
Temperature Performance ◽  
Sharp Edges ◽  
Normal Carbon

Abstract CYCLOPS M4 is a deep-hardening steel that was developed to utilize the excellent abrasion resistance that results from higher-than-normal carbon and vanadium contents in the molybdenum-tungsten family of high-speed steels. It is recommended for heavy-duty cutting operations and for sharp edges for fine cuts. Cyclops M4 should always be used at or near maximum hardness. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-335. Producer or source: Cyclops Corporation.

VANADIS 23

Alloy Digest ◽  
1998 ◽  
Vol 47 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Powder Metallurgy ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tool Steel ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating

Abstract Vanadis 23 is a Cr-Mo-W-Va alloyed high-speed steel made by powder metallurgy. The tool steel offers an excellent combination of wear resistance and toughness. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on heat treating, machining, and surface treatment. Filing Code: TS-561. Producer or source: Uddeholm Corporation. See also Alloy Digest TS-552, March 1997.

Sign in / Sign up

Export Citation Format

Share Document