CYCLOPS S2

Alloy Digest ◽  
1977 ◽  
Vol 26 (12) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
High Strength ◽  
Heat Treating ◽  
Good Ductility ◽  
Excellent Service ◽  
High Silicon ◽  
Major Factors

Abstract CYCLOPS S2 is a high-silicon, shock-resisting tool steel with extreme toughness. It has good ductility and toughness at high strength levels, and gives excellent service in those applications where shock and impact are major factors. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-328. Producer or source: Cyclops Corporation.

PYROTOOL A

Alloy Digest ◽  
1971 ◽  
Vol 20 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Good Ductility ◽  
Extrusion Dies ◽  
Temperature Performance

Abstract PYROTOOL A has been designed to display high strength and good ductility at temperatures up to 1200 F. It is used for high-temperature tooling, extrusion dies, liners, dummy blocks, forging dies, mandrels, holders, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-47. Producer or source: Carpenter.

ANSONIA ALLOY C65500 AND C66100

Alloy Digest ◽  
2009 ◽  
Vol 58 (3) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Silicon Bronze ◽  
High Silicon

Abstract Ansonia alloy C65500 and C66100 are high silicon bronze and leaded high silicon bronze alloys that are high strength; the latter are the machinable equivalent. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: CU-767. Producer or source: Ansonia Copper & Brass Inc.

WAIMET WI-52

Alloy Digest ◽  
1961 ◽  
Vol 10 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Tungsten Alloy ◽  
Good Ductility ◽  
Temperature Performance ◽  
Cobalt Base

Abstract Waimet WI-52 is a cobalt-base high-tungsten alloy recommended for high temperature castings. It has high strength with good ductility and corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Co-26. Producer or source: Waimet Alloys Company.

SPS TECHNOLOGIES MP35N

Alloy Digest ◽  
2021 ◽  
Vol 70 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Unique Combination ◽  
Good Ductility ◽  
Cobalt Nickel

Abstract SPS Technologies MP35N is a multiphase cobalt-nickel alloy that possesses a unique combination of ultra-high strength, good ductility and toughness, outstanding corrosion resistance, and excellent cryogenic properties. It was the first fastener superalloy developed by SPS Technologies. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Co-140. Producer or source: SPS Technologies, Inc.

UNS T30106

Alloy Digest ◽  
1988 ◽  
Vol 37 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
High Carbon ◽  
Steel Mills

Abstract UNS No. T30106 is an air-hardening high-carbon tool steel designed for a combination of high strength, good wear resistance, and good toughness. It is easy to heat treat with a minimum of distortion and is used extensively for plastic molds. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-489. Producer or source: Tool steel mills.

HECLA

Alloy Digest ◽  
1958 ◽  
Vol 7 (1) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Fatigue Resistance ◽  
Tool Steel ◽  
High Strength ◽  
Heat Treating ◽  
High Fatigue ◽  
Machine Parts

Abstract HECLA is a high strength, tough tool steel with high fatigue resistance intended for tools and machine parts requiring great toughness and moderate wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-66. Producer or source: H. K. Porter Company Inc..

STROLOY 5C

Alloy Digest ◽  
1985 ◽  
Vol 34 (7) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
High Strength ◽  
Heat Treating ◽  
Stress Relief ◽  
Good Combination ◽  
Low Alloy Steel ◽  
Good Ductility

Abstract STROLOY 5C is a high-strength low-alloy steel developed for seamless hot-or-cold finished tubing and extruded shapes in the water-quenched-and-tempered condition. In this condition the steel exhibits high tensile and yield strengths and good ductility. It can be are welded readily using the procedures prescribed by the manufacturer. Preheat, postheat and stress relief normally are not required. Stroloy 5C tubing is used for applications requiring a good combination of strength, toughness and weldability. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-410. Producer or source: Babcock & Wilcox Company. See also Alloy Digest SA-213, revised December 1976.

ORVAR 2M

Alloy Digest ◽  
2008 ◽  
Vol 57 (2) ◽  
Keyword(s):  
North America ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Tool Steels ◽  
Good Ductility ◽  
Aisi H13 ◽  
Conventional Tool

Abstract Orvar 2M is a conventional tool steel of overall good ductility, toughness, weldability, and machinability. The alloy has the best overall product consistency for conventionally produced AISI H13 type tool steels. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-661. Producer or source: Böhler-Uddeholm North America.

INCONEL ALLOY 725

Alloy Digest ◽  
1994 ◽  
Vol 43 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Inconel Alloy ◽  
Alloy 625

Abstract INCONEL ALLOY 725 is an age-hardenable alloy that displays high strength along with excellent ductility and toughness. Its corrosion resistance is comparable to alloy 625. Good flattening properties are exhibited in age-hardened tubing. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating and machining. Filing Code: Ni-445. Producer or source: Inco Alloys International Inc.

BERYLCO 25

Alloy Digest ◽  
1973 ◽  
Vol 22 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
High Performance ◽  
High Strength ◽  
Heat Treating ◽  
Beryllium Copper

Abstract BERYLCO 25 is the standard high-performance beryllium copper alloy most widely used because of its high strength, hardness and excellent spring characteristics. BERYLCO 25 is the updated version of BERYLCO 25S (Alloy Digest Cu-3, November 1952). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-271. Producer or source: Kawecki Berylco Industries Inc..

Sign in / Sign up

Export Citation Format

Share Document