WANDO

Alloy Digest ◽  
1979 ◽  
Vol 28 (10) ◽  
Keyword(s):  
Low Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Volume Change ◽  
Heat Treating ◽  
General Purpose ◽  
Minimum Volume ◽  
Tool Steels ◽  
Die Steel

Abstract WANDO belongs to that class of oil-hardening tool steels known as non-deforming steels. It will develop full hardness on oil quenching from a relatively low temperature with minimum volume change, hence non-deforming. It is a general-purpose tool and die steel. Among its many applications are dies for many purposes, shear blades, taps and reamers. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: TS-354. Producer or source: Cyclops Corporation.

CARPENTER O-1

Alloy Digest ◽  
1978 ◽  
Vol 27 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Die Steel

Abstract CARPENTER O-1 is a nondeforming die steel that can be oil hardened safely even in intricate sections. It is made from billets that are 100% acid-disc inspected and ultrasonically tested to insure sound metal in the finished bars. It may be classified as a general-purpose tool and die steel. Among its many uses are dies for a variety of purposes, master tools, broaches and thread gages. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, and deformation. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-333. Producer or source: Carpenter.

VASCO TUF

Alloy Digest ◽  
1974 ◽  
Vol 23 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Cold Work ◽  
Heat Treating ◽  
Tool Steels ◽  
Maximum Hardness ◽  
Die Steel ◽  
Warm Working

Abstract VASCO TUF is an air-hardening die steel ideally suited for cold-work applications requiring good toughness. It has better wear resistance than the shock-resisting tool steels. It achieves a maximum hardness of Rockwell C 58-60 when multiple tempered at 950 F: this means that it can also be used for warm-working applications without losing hardness. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: TS-274. Producer or source: Teledyne Vasco.

GUTERL O-1

Alloy Digest ◽  
1981 ◽  
Vol 30 (2) ◽  
Keyword(s):  
Physical Properties ◽  
Surface Treatment ◽  
Heat Treating ◽  
General Purpose ◽  
Good Combination ◽  
Special Steel ◽  
Die Steel ◽  
Steel Corporation

Abstract GUTERL 0-1 is a nondeforming, oil-hardening, general-purpose tool and die steel. It can be oil hardened safely even in complex sections and shapes. It has a good combination of hardeness, toughness and resistance to abrasion and wear. Its many applications include dies for numerous purposes, broaches, forming rolls, stamps and knurling tools. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-377. Producer or source: Guterl Special Steel Corporation.

MAGNESIUM TA54A

Alloy Digest ◽  
1960 ◽  
Vol 9 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Magnesium Alloy ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Aluminum Company ◽  
Hammer Forging

Abstract MAGNESIUM ALLOY-TA54A is a general purpose hammer-forging alloy having intermediate strength. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Mg-44. Producer or source: Aluminum Company of America.

TECHALLOY NICKEL 200

Alloy Digest ◽  
1977 ◽  
Vol 26 (6) ◽  
Keyword(s):  
Physical Properties ◽  
Surface Treatment ◽  
Low Temperatures ◽  
Nickel Alloys ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
General Purpose ◽  
Commercially Pure ◽  
Electrical Components ◽  
Nickel 200

Abstract TECHALLOY Nickel 200 is commercially pure wrought nickel. It maintains good strength at elevated temperatures and is tough and ductile at low temperatures. It is a general-purpose material when the properties of nickel alloys are not needed. Its many uses include spun and cold-formed parts, electrical components, transducers and nickel-cadmium batteries. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-246. Producer or source: Techalloy Company Inc..

HOTFORM No. 3

Alloy Digest ◽  
1981 ◽  
Vol 30 (9) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Cold Work ◽  
Heat Treating ◽  
High Hardenability ◽  
Cold Forming ◽  
Medium Carbon ◽  
Die Steel

Abstract HOTFORM No. 3 is a medium-carbon, air-hardening, cold-work die steel. It also is used in some applications as a hot-work tool and die steel. An excellent combination of high hardenability, good wear resistance and toughness makes Hotform No. 3 useful for special tools. Typical applications are blanking dies, cold-forming dies, punches and cold and hot shear blades. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-386. Producer or source: Teledyne Vasco.

SELECT B

Alloy Digest ◽  
1985 ◽  
Vol 34 (10) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Abrasion Resistance ◽  
Heat Treating ◽  
Tool Steels ◽  
High Carbon ◽  
Steel Company ◽  
Die Steel ◽  
High Chromium ◽  
Aisi Type

Abstract SELECT B is a fully uniform air-hardening die steel having abrasion resistance intermediate between Olympic (AISI Type D2) high-carbon, high-chromium die steel and Badger (AISI Type O1) oil-hardening die steel. SELECT B has excellent non-deforming, deep-hardening characteristics and good toughness. Its machinability is comparable to most oil-hardening tool steels. Among its many uses are cold blanking and forming dies, rolls, punches, gages and broaches. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, and machining. Filing Code: TS-448. Producer or source: Latrobe Steel Company.

LESCO S-7

Alloy Digest ◽  
1985 ◽  
Vol 34 (3) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Heat Treating ◽  
Unique Combination ◽  
Steel Company ◽  
Die Steel ◽  
Carbon Level

Abstract LESCO S-7 is an air or oil-hardening die steel with a unique combination of toughness and wear-resistance properties that makes it an ideal choice for many tooling applications. The outstanding properties of Lesco S-7 are provided by an intermediate carbon level balanced with moderate amounts of chromium and molybdenum. It is used for both cold and hot tooling applications. Its many uses include shear blades, swaging dies, chisels and dies for molding plastics below 1000 F (538 C). This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, joining, and surface treatment. Filing Code: TS-437. Producer or source: Latrobe Steel Company.

CARPENTER S7

Alloy Digest ◽  
1978 ◽  
Vol 27 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Tool Steel ◽  
High Resistance ◽  
Cold Work ◽  
Heat Treating ◽  
General Purpose ◽  
Good Resistance

Abstract CARPENTER S7 is a general-purpose air-hardening tool steel characterized by high resistance to impact and shock. It has good resistance to softening at moderately high temperatures. This combination of properties makes it suitable for many hot-work and cold-work applications. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on heat treating, machining, and surface treatment. Filing Code: TS-329. Producer or source: Carpenter.

URANUS B64

Alloy Digest ◽  
2015 ◽  
Vol 64 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Low Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance

Abstract Uranus B64 is a pitting resistant, high-strength nonmagnetic stainless steel. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: SS-1218. Producer or source: Industeel USA, LLC. See also Alloy Digest SS-1253, October 2016.

Sign in / Sign up

Export Citation Format

Share Document