MAXITE

Alloy Digest ◽  
1986 ◽  
Vol 35 (7) ◽  
Keyword(s):  
Tool Steel ◽  
High Speed ◽  
Single Point ◽  
Cutting Tools ◽  
Heat Treating ◽  
Steel Company ◽  
Hardened Alloy ◽  
Hard Materials ◽  
Alloy Steels ◽  
Chip Removal

Abstract MAXITE is a tungsten-cobalt-vanadium high-speed tool steel. It is best used when maximum chip removal with single-point cutting tools is of primary importance. Tools made from Maxite will cut tough and hard materials such as stainless steels and hardened alloy steels with relative ease. It is excellent for cutting weld flashings and gritty, scaly hard castings. Among its many applications are drills, lathe tools, planer tools, cutoff tools and roll-turning tools. This datasheet provides information on composition and hardness. It also includes information on wear resistance as well as forming, heat treating, and machining. Filing Code: TS-461. Producer or source: Columbia Tool Steel Company.

UNS T11310

Alloy Digest ◽  
1988 ◽  
Vol 37 (5) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
High Speed ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Steel Mills

Abstract UNS No. T11310 is the high vanadium type of molybdenum high-speed steel. It is a deep-hardening steel and offers high cutting ability and excellent finishing properties. It is a general-purpose steel for cutting tools and is used in such applications as taps, lathe tools and reamers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on heat treating and machining. Filing Code: TS-490. Producer or source: Tool steel mills.

ELECTRITE COBALT

Alloy Digest ◽  
1960 ◽  
Vol 9 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
High Speed ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Heat Treating ◽  
Heavy Duty ◽  
Steel Company

Abstract ELECTRITE COBALT is a 5% cobalt type high-speed steel recommended for heavy duty cutting tools. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-89. Producer or source: Latrobe Steel Company.

SANDVIK APM 2730

Alloy Digest ◽  
2019 ◽  
Vol 68 (4) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
Abrasive Wear ◽  
Tool Steel ◽  
High Speed ◽  
Heat Treating ◽  
Abrasive Wear Resistance ◽  
Steel Company ◽  
High Compressive Strength

Abstract Sandvik APM 2730 is a powder metallurgical alloyed hot-isostatic-pressed high-speed tool steel with abrasive wear resistance and high-compressive strength. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on heat treating and machining. Filing Code: TS-763. Producer or source: Sandvik Steel Company.

LESCO T-15 PM

Alloy Digest ◽  
1990 ◽  
Vol 39 (8) ◽  
Keyword(s):  
Powder Metallurgy ◽  
Physical Properties ◽  
Tool Steel ◽  
Abrasion Resistance ◽  
High Speed ◽  
Heat Treating ◽  
High Carbon ◽  
Steel Company ◽  
Good Retention ◽  
Hot Hardness

Abstract LESCOT-15 PM is a special purpose tungsten type high-speed tool steel containing cobalt for good retention of hot hardness and high carbon and vanadium for enhanced abrasion resistance. It is produced by powder metallurgy. This datasheet provides information on composition, physical properties, microstructure, hardness, and elasticity. It also includes information on heat treating and machining. Filing Code: TS-498. Producer or source: Latrobe Steel Company. Originally published August 1989, revised August 1990.

UDDEHOLM VANADIS 23 SUPERCLEAN

Alloy Digest ◽  
2021 ◽  
Vol 70 (11) ◽  
Keyword(s):  
Tool Steel ◽  
High Speed ◽  
Cold Work ◽  
Cutting Tools ◽  
Heat Treating ◽  
Rolled Strip ◽  
Strip Steel ◽  
Powder Metallurgy Process ◽  
Cold Rolled ◽  
Metallurgy Process

Abstract Uddeholm Vanadis 23 SuperClean is a chromium-molybdenum-tungsten-vanadium high speed tool steel that is produced by the powder metallurgy process. This steel is similar to Type M3, Class 2 high speed tool steel, and combines high compressive strength with good abrasive wear resistance. It is suitable for demanding cold work applications like blanking of harder materials like carbon steel or cold rolled strip steel and for cutting tools. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on heat treating, machining, and surface treatment. Filing Code: TS-820. Producer or source: Uddeholms AB (a voestalpine company).

AISI TYPE M30

Alloy Digest ◽  
1972 ◽  
Vol 21 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tool Steel ◽  
High Speed ◽  
Cutting Tools ◽  
Heat Treating ◽  
Good Combination ◽  
Steel Mills ◽  
Aisi Type ◽  
Optimum Cutting ◽  
Long Life

Abstract AISI Type M30 is a high-speed tool steel containing 8% molybdenum and 5% cobalt. It provides long life in machining difficult-to-cut metals, such as heat-resisting alloys and superalloys, and is recommended for cutting tools requiring a good combination of suitable toughness with optimum cutting qualities. This datasheet provides information on composition and hardness as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-247. Producer or source: Tool steel mills.

VANITE

Alloy Digest ◽  
1986 ◽  
Vol 35 (5) ◽  
Keyword(s):  
Wear Resistance ◽  
Tool Steel ◽  
High Speed ◽  
Heat Treating ◽  
High Carbon ◽  
Steel Company ◽  
Cutting Efficiency ◽  
High Speeds ◽  
Aisi Type ◽  
Fine Surface

Abstract VANITE is a high-carbon, high-vanadium modification of the 18W-4Cr-IV (AISI Type T1) high-speed tool steel. Its increased alloy content provides increases in cutting efficiency and wear resistance. Vanite is especially suitable for light cuts at high speeds that produce a fine surface finish. It will hold a keen cutting edge and because of this it is used primarily for broaches, reamers and finishing tools. This datasheet provides information on composition, physical properties, and hardness. It also includes information on heat treating and machining. Filing Code: TS-458. Producer or source: Columbia Tool Steel Company.

UTICA

Alloy Digest ◽  
1975 ◽  
Vol 24 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tool Steel ◽  
High Speed ◽  
Cold Work ◽  
Cutting Tools ◽  
Heat Treating ◽  
Cutting Edge ◽  
Cold Forming ◽  
Cold Work Tool Steel

Abstract UTICA is a tungsten-carbon cold-work tool steel designed for many types of cutting tools where higher alloy, high-speed steels are not required. It is fairly deep hardening, holds a keen cutting edge and has excellent resistance to abrasion. Utica is used for many kinds of blanking and cold-forming punches. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-285. Producer or source: Allegheny Ludlum Corporation.

SANDVIK APM 2723

Alloy Digest ◽  
2019 ◽  
Vol 68 (3) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
Abrasive Wear ◽  
Tool Steel ◽  
High Speed ◽  
Heat Treating ◽  
Abrasive Wear Resistance ◽  
Steel Company ◽  
High Compressive Strength

Abstract Sandvik APM 2723 is a powder metallurgical alloyed hot-isostatic-pressed high-speed tool steel with abrasive wear resistance and high-compressive strength. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on heat treating. Filing Code: TS-758. Producer or source: Sandvik Steel Company.

THYRAPID 3247

Alloy Digest ◽  
1992 ◽  
Vol 41 (10) ◽  
Keyword(s):  
Heat Treatment ◽  
Physical Properties ◽  
Tool Steel ◽  
High Speed ◽  
Cutting Tools ◽  
Heat Treating ◽  
General Purpose

Abstract THYRAPID 3247 is a super high-speed tool steel able to attain a hardness of Rc 66/68 with nominal heat treatment. The higher hardness finds favor for special purpose cutting tools with requirements beyond the capability of general purpose high-speed steels. The alloy is similar to AISI M42. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on heat treating and machining. Filing Code: TS-513. Producer or source: Thyssen Specialty Steels Inc..

Sign in / Sign up

Export Citation Format

Share Document