UDDEHOLM VANADIS 23 SUPERCLEAN

Alloy Digest ◽  
2021 ◽  
Vol 70 (11) ◽  
Keyword(s):  
Tool Steel ◽  
High Speed ◽  
Cold Work ◽  
Cutting Tools ◽  
Heat Treating ◽  
Rolled Strip ◽  
Strip Steel ◽  
Powder Metallurgy Process ◽  
Cold Rolled ◽  
Metallurgy Process

Abstract Uddeholm Vanadis 23 SuperClean is a chromium-molybdenum-tungsten-vanadium high speed tool steel that is produced by the powder metallurgy process. This steel is similar to Type M3, Class 2 high speed tool steel, and combines high compressive strength with good abrasive wear resistance. It is suitable for demanding cold work applications like blanking of harder materials like carbon steel or cold rolled strip steel and for cutting tools. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on heat treating, machining, and surface treatment. Filing Code: TS-820. Producer or source: Uddeholms AB (a voestalpine company).

UTICA

Alloy Digest ◽  
1975 ◽  
Vol 24 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tool Steel ◽  
High Speed ◽  
Cold Work ◽  
Cutting Tools ◽  
Heat Treating ◽  
Cutting Edge ◽  
Cold Forming ◽  
Cold Work Tool Steel

Abstract UTICA is a tungsten-carbon cold-work tool steel designed for many types of cutting tools where higher alloy, high-speed steels are not required. It is fairly deep hardening, holds a keen cutting edge and has excellent resistance to abrasion. Utica is used for many kinds of blanking and cold-forming punches. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-285. Producer or source: Allegheny Ludlum Corporation.

ASP 23

Alloy Digest ◽  
1991 ◽  
Vol 40 (3) ◽  
Keyword(s):  
Powder Metallurgy ◽  
Physical Properties ◽  
Tool Steel ◽  
High Speed ◽  
Heat Treating ◽  
Bend Strength ◽  
Powder Metallurgy Process ◽  
Metallurgy Process

Abstract ASP 23 is a high-speed tool steel manufactured by the ASP powder metallurgy process in which the steel is atomized, compacted, and hot formed to the desired dimensions. This datasheet provides information on composition, physical properties, hardness, elasticity, and bend strength. It also includes information on heat treating, machining, and joining. Filing Code: TS-503. Producer or source: Uddeholm Corporation.

CRUCIBLE REX M2

Alloy Digest ◽  
2020 ◽  
Vol 69 (10) ◽  
Keyword(s):  
Wear Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tool Steel ◽  
High Speed ◽  
Cold Work ◽  
Cutting Tools ◽  
Heat Treating ◽  
General Purpose ◽  
Temperature Performance

Abstract Crucible Rex M2 is a general-purpose high-speed tool steel that contains tungsten, molybdenum, chromium, and vanadium as principal alloying elements. It is suitable for a wide variety of cutting tools that require moderate feeds and speeds. For cold work applications, Rex M2 offers higher hardness and wear resistance than Type D2 tool steel. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on low and high temperature performance as well as forming, heat treating, machining, and surface treatment. Filing Code: TS-801. Producer or source: Crucible Industries LLC.

LESCO M-4 PM

Alloy Digest ◽  
1990 ◽  
Vol 39 (5) ◽  
Keyword(s):  
Wear Resistance ◽  
Powder Metallurgy ◽  
Physical Properties ◽  
Tool Steel ◽  
High Speed ◽  
Heat Treating ◽  
Vanadium Content ◽  
Steel Company ◽  
Powder Metallurgy Process ◽  
Metallurgy Process

Abstract LESCO M-4 PM high-speed tool steel is a special purpose grade of the molybdenum-tungsten family. Abrasion and wear resistance are enhanced by the increased carbon and vanadium content. It is produced by the powder metallurgy process with resultant better grindability, toughness and improved microstructure as compared with conventional wrought M-4 steel. Sulfide additives enhance machinability. This datasheet provides information on composition, physical properties, microstructure, hardness, and elasticity. It also includes information on heat treating and machining. Filing Code: TS-500. Producer or source: Latrobe Steel Company.

UNS T11310

Alloy Digest ◽  
1988 ◽  
Vol 37 (5) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
High Speed ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Steel Mills

Abstract UNS No. T11310 is the high vanadium type of molybdenum high-speed steel. It is a deep-hardening steel and offers high cutting ability and excellent finishing properties. It is a general-purpose steel for cutting tools and is used in such applications as taps, lathe tools and reamers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on heat treating and machining. Filing Code: TS-490. Producer or source: Tool steel mills.

CARPENTER CTS-204P ALLOY (MICRO MELT 20-4)

Alloy Digest ◽  
2010 ◽  
Vol 59 (1) ◽  
Keyword(s):  
Wear Resistance ◽  
Volume Fraction ◽  
Cold Work ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Corrosion Resistant ◽  
Die Steel ◽  
Powder Metallurgy Process ◽  
Wear And Corrosion ◽  
Metallurgy Process

Abstract Carpenter CTS-204P (Micro Melt 20-4) alloy is a highly wear- and corrosion-resistant, air-hardening martensitic cold-work stainless die steel produced using Carpenter’s Micro-Melt powder metallurgy process. The excellent wear resistance of the alloy is provided by a significant volume fraction of hard vanadium-rich carbides, while the outstanding corrosion resistance of the alloy is obtained as a result of the chromium-rich matrix. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on corrosion and wear resistance as well as forming, heat treating, and machining. Filing Code: SS-1051. Producer or source: Carpenter Specialty Alloys.

TM-6 LOW CARBON

Alloy Digest ◽  
1966 ◽  
Vol 15 (2) ◽  
Keyword(s):  
High Speed ◽  
Cold Work ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Heat Treating ◽  
Low Carbon

Abstract TM-6 LOW CARBON is a modification of Type M-2 tungsten-molybdenum high-speed steel recommended for cold work or hot work applications. It is not intended for use as cutting tools. This datasheet provides information on composition and hardness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-175. Producer or source: H. K. Porter Company Inc..

FERRO-TITANIT C-SPEZIAL

Alloy Digest ◽  
2018 ◽  
Vol 67 (2) ◽  
Keyword(s):  
Wear Resistance ◽  
Metal Matrix ◽  
Cutting Tools ◽  
Heat Treating ◽  
High Wear Resistance ◽  
Matrix Composites ◽  
Bend Strength ◽  
Powder Metal ◽  
Powder Metallurgy Process ◽  
Metallurgy Process

Abstract FERRO-TITANIT C-SPEZIAL is one of a series of metal-matrix composites manufactured by a powder metallurgy process. Ferro-Titanit C-SPEZIAL contains 33% titanium carbide, one of the hardest and most resistant carbides. Because of its high wear resistance and low tendency towards cold welding, Ferro-Titanit is particularly used in forming and cutting tools. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and compressive and bend strength. It also includes information on wear resistance as well as forming, heat treating, machining, and powder metal forms. Filing Code: SA-812. Producer or source: Deutsche Edelstahlwerke GmbH.

AISI TYPE M30

Alloy Digest ◽  
1972 ◽  
Vol 21 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tool Steel ◽  
High Speed ◽  
Cutting Tools ◽  
Heat Treating ◽  
Good Combination ◽  
Steel Mills ◽  
Aisi Type ◽  
Optimum Cutting ◽  
Long Life

Abstract AISI Type M30 is a high-speed tool steel containing 8% molybdenum and 5% cobalt. It provides long life in machining difficult-to-cut metals, such as heat-resisting alloys and superalloys, and is recommended for cutting tools requiring a good combination of suitable toughness with optimum cutting qualities. This datasheet provides information on composition and hardness as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-247. Producer or source: Tool steel mills.

MAXITE

Alloy Digest ◽  
1986 ◽  
Vol 35 (7) ◽  
Keyword(s):  
Tool Steel ◽  
High Speed ◽  
Single Point ◽  
Cutting Tools ◽  
Heat Treating ◽  
Steel Company ◽  
Hardened Alloy ◽  
Hard Materials ◽  
Alloy Steels ◽  
Chip Removal

Abstract MAXITE is a tungsten-cobalt-vanadium high-speed tool steel. It is best used when maximum chip removal with single-point cutting tools is of primary importance. Tools made from Maxite will cut tough and hard materials such as stainless steels and hardened alloy steels with relative ease. It is excellent for cutting weld flashings and gritty, scaly hard castings. Among its many applications are drills, lathe tools, planer tools, cutoff tools and roll-turning tools. This datasheet provides information on composition and hardness. It also includes information on wear resistance as well as forming, heat treating, and machining. Filing Code: TS-461. Producer or source: Columbia Tool Steel Company.

Sign in / Sign up

Export Citation Format

Share Document