CARPENTER SOLAR

Alloy Digest ◽  
1988 ◽  
Vol 37 (12) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Hard Case ◽  
Large Sections

Abstract CARPENTER SOLAR alloy is an extremely tough, water-hardening tool steel. Large sections harden to a hard case with a tough core. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-494. Producer or source: Carpenter.

SOLAR TOOL STEEL

Alloy Digest ◽  
1991 ◽  
Vol 40 (9) ◽  
Keyword(s):  
Physical Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Hard Case ◽  
Large Sections

Abstract SOLAR TOOL STEEL is a very tough water hardening tool steel. Even at Rockwell C 59/60, it will bend before breaking. If medium and large sections, the steel develops a hard case and tough core when hardened. This datasheet provides information on composition, physical properties, and hardness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-32. Producer or source: Carpenter. Originally published as Solar, April 1955, revised September 1991.

AISI TYPE S2

Alloy Digest ◽  
1982 ◽  
Vol 31 (12) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Shock Loading ◽  
Heat Treating ◽  
Medium Size ◽  
Hard Case ◽  
Large Size ◽  
Steel Mills ◽  
Aisi Type

Abstract AISI Type S2 is a water-hardening tool steel with extreme toughness and resistance to shock loading. Even at a hardness of Rockwell C 59-60, it will bend before it breaks. When hardened in medium-size and large-size pieces, it acquires a hard case and a tough core. Sizes under 3/4-inch (19mm) diameter will water harden to the center. The extreme toughness of Type S2 makes it suitable for use in many applications where no other tool steel will hold up. Its many uses include chisels, rivet busters, spike mauls, screw drivers, punches and sledges. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-408. Producer or source: Tool steel mills.

CYCLOPS 62

Alloy Digest ◽  
1966 ◽  
Vol 15 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Cold Work ◽  
High Hardness ◽  
Heat Treating ◽  
High Tempering

Abstract Cyclops 62 is an air-hardening tool steel with exceptional resistance to softening when tempering. It is recommended for cold work applications where high hardness after high tempering temperatures is a requirement. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-181. Producer or source: Cyclops Corporation.

UNS T11310

Alloy Digest ◽  
1988 ◽  
Vol 37 (5) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
High Speed ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Steel Mills

Abstract UNS No. T11310 is the high vanadium type of molybdenum high-speed steel. It is a deep-hardening steel and offers high cutting ability and excellent finishing properties. It is a general-purpose steel for cutting tools and is used in such applications as taps, lathe tools and reamers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on heat treating and machining. Filing Code: TS-490. Producer or source: Tool steel mills.

UDDEHOLM QRO 80 MICRODIZED

Alloy Digest ◽  
1987 ◽  
Vol 36 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Elevated Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Die Casting ◽  
Heat Treating ◽  
Temperature Performance ◽  
Improved Performance

Abstract UHB QRO 80 MICRODIZED is a chromium-molybdenum-vanadium tool steel with improved performance for tooling used at elevated temperature as in forging, extrusion and die casting. It is electro-slag refined. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-486. Producer or source: Uddeholm Aktiebolag.

AISI 9255

Alloy Digest ◽  
1958 ◽  
Vol 7 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Tool Steel ◽  
Heat Treating ◽  
Steel Mills ◽  
Shock Resistance

Abstract AISI 9255 is a silico-manganese spring and tool steel having good toughness and shock resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-73. Producer or source: Alloy steel mills and foundries.

HI-SHOCK 60

Alloy Digest ◽  
1963 ◽  
Vol 12 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Shock Resistance

Abstract Carpenter Hi-Shock 60 is an air-hardening tool steel for tools and dies which require extreme shock resistance with tensile strengths over 350,000 psi. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-139. Producer or source: Carpenter.

KETOS

Alloy Digest ◽  
1960 ◽  
Vol 9 (8) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Grain Structure ◽  
Steel Company ◽  
Fine Grain ◽  
Crucible Steel

Abstract KETOS is an oil-hardening non-deforming tool steel having deep hardening qualities with a fine grain structure. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as deformation. It also includes information on forming, heat treating, and machining. Filing Code: TS-96. Producer or source: Crucible Steel Company of America.

CANNON-MUSKEGON H-11

Alloy Digest ◽  
1973 ◽  
Vol 22 (3) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Silicon Content ◽  
Cast Steel ◽  
Heat Treating ◽  
Red Hardness ◽  
The Sacrifice

Abstract CANNON-MUSKEGON H-11 is an air-hardening hot-work cast tool steel used for hot applications requiring good toughness combined with good red-hardness and for cold applications where toughness is required at the sacrifice of some wear. A higher silicon content is permissable in this cast steel than in AISI H-11 (wrought) tool steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on casting, heat treating, machining, and joining. Filing Code: TS-251. Producer or source: Cannon-Muskegon Corporation.

AISI TYPE L2

Alloy Digest ◽  
1983 ◽  
Vol 32 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Carbon Content ◽  
Tensile Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Steel Mills ◽  
Aisi Type ◽  
Lower Carbon

Abstract AISI Type 1.2 is a chromium-vanadium tool steel of modest hardenability and variable carbon content (nominally 0.50-1.10% carbon). At its lower carbon levels, it is used for tools requiring toughness and resistance to shock and vibration. At its higher carbon levels, it is recommended for resistance to abrasion, fatigue and wear. It is used for both hot-work and cold-work applications. Among its many uses are automotive gears, forgings, gun barrels, shafts, wrenches, chisels, punches, lathe spindles, axes, shear blades, dies, files, reamers and drills. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-416. Producer or source: Tool steel mills.

Sign in / Sign up

Export Citation Format

Share Document