TLP A11

Alloy Digest ◽  
2001 ◽  
Vol 50 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
High Temperature ◽  
Impact Toughness ◽  
Physical Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
High Impact ◽  
High Wear Resistance ◽  
Temperature Performance

Abstract Timken Latrobe Steel TLP A11 is a powder metallurgically produced A11 type of tool steel that is air hardening. It provides high wear resistance and a relatively high impact toughness. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on high temperature performance and wear resistance as well as heat treating and machining. Filing Code: TS-584. Producer or source: Timken Latrobe Steel.

TLP NINE

Alloy Digest ◽  
2001 ◽  
Vol 50 (4) ◽  
Keyword(s):  
Wear Resistance ◽  
High Temperature ◽  
Powder Metallurgy ◽  
Impact Toughness ◽  
Physical Properties ◽  
Heat Treating ◽  
High Impact ◽  
High Wear Resistance ◽  
Temperature Performance ◽  
Very High

Abstract Timken Latrobe Steel TLP Nine is made by powder metallurgy. It is an air-hardening tool steel with very high wear resistance and high impact toughness. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on high temperature performance as well as heat treating and machining. Filing Code: TS-585. Producer or source: Timken Latrobe Steel.

CARPENTER MICRO-MELT A11-LVC

Alloy Digest ◽  
2000 ◽  
Vol 49 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Temperature Performance

Abstract Micro-Melt A11-LVC is a high-vanadium tool steel produced by the Carpenter Micro-Melt powder process. It provides higher toughness than Carpenter Micro-Melt A11 (Alloy Digest TS-571, January 2000) with lower wear resistance. It is used where slightly less wear resistance than that of Micro-Melt A11 is acceptable. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and wear resistance as well as heat treating and machining. Filing Code: TS-573. Producer or source: Carpenter.

POTOMAC 2V

Alloy Digest ◽  
1974 ◽  
Vol 23 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tool Steel ◽  
Heat Treating ◽  
High Carbon ◽  
Temperature Performance ◽  
Hot Work Tool Steel

Abstract POTOMAC 2V is a high-carbon, high-vanadium modification of the well-known 5% chromium hot-work tool steel. It has improved wear resistance and the necessary toughness for severe forming applications. It is recommended for such applications as hot dies for extrusions and forgings, piercing points and hot punches. This datasheet provides information on composition, physical properties, and hardness as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: TS-280. Producer or source: Allegheny Ludlum Corporation.

THERMOLD H13

Alloy Digest ◽  
1972 ◽  
Vol 21 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
High Temperature ◽  
Elevated Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Temperature Performance ◽  
Hot Hardness

Abstract THERMOLD H13 (formerly Thermold AV) is an air-hardening hot-work tool steel having good wear resistance and hot hardness at elevated temperature. Uniforged Rounds of THERMOLD H13 were developed especially for critically stressed extrusion tools and other hot-work tooling applications. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-241. Producer or source: Cyclops Corporation.

TLP M4

Alloy Digest ◽  
2001 ◽  
Vol 50 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
High Temperature ◽  
Powder Metallurgy ◽  
Impact Toughness ◽  
High Speed ◽  
Heat Treating ◽  
High Impact ◽  
Bend Strength ◽  
Temperature Performance

Abstract TLP M4 is a powder metallurgy produced high-speed tool steel with a combination of wear resistance, high impact toughness, and transverse bend strength. This datasheet provides information on composition, physical properties, and hardness as well as fracture toughness. It also includes information on high temperature performance and wear resistance as well as heat treating. Filing Code: TS-586. Producer or source: Timken Latrobe Steel.

DYNAMAX

Alloy Digest ◽  
2006 ◽  
Vol 55 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Temperature Performance ◽  
Aerospace Alloys ◽  
Hot Hardness

Abstract Dynamax is a superhigh-speed tool steel with cobalt, designed for high hot hardness. It is used to machine the toughest aerospace alloys. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on high temperature performance and wear resistance as well as heat treating and machining. Filing Code: TS-628. Producer or source: Timken Latrobe Steel.

NUCALLOY 45

Alloy Digest ◽  
1977 ◽  
Vol 26 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
High Resistance ◽  
Heat Treating ◽  
Nickel Chromium ◽  
Temperature Performance ◽  
Commercial Applications

Abstract NUCALLOY 45 is a nickel-chromium-boron alloy which derives superior wear resistance from the presence of hard nickel borides (and to a lesser extent chromium carbides) tightly held in a nickel-rich matrix. It is used in many commercial applications because of its toughness and high resistance to attack by many chemicals. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Ni-238. Producer or source: Stoody Company.

UDDEHOLM QRO 80 MICRODIZED

Alloy Digest ◽  
1987 ◽  
Vol 36 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Elevated Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Die Casting ◽  
Heat Treating ◽  
Temperature Performance ◽  
Improved Performance

Abstract UHB QRO 80 MICRODIZED is a chromium-molybdenum-vanadium tool steel with improved performance for tooling used at elevated temperature as in forging, extrusion and die casting. It is electro-slag refined. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-486. Producer or source: Uddeholm Aktiebolag.

MILNE CMV

Alloy Digest ◽  
1961 ◽  
Vol 10 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Tensile Properties ◽  
Tool Steel ◽  
Compression Strength ◽  
Heat Treating ◽  
Medium Carbon ◽  
Temperature Performance

Abstract Milne CMV is a 5% chromium, medium-carbon hot work tool steel, having high compression strength, wear resistance, and corrosion resistance. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-111. Producer or source: A. Milne & Company (Distributor).

CARPENTER No. 882

Alloy Digest ◽  
1978 ◽  
Vol 27 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Temperature Performance ◽  
Hot Work Tool Steel ◽  
Red Hardness

Abstract CARPENTER No. 882 is a 5% chromium hot-work tool steel designed particularly for applications requiring extreme toughness combined with good red hardness. It also has found cold-work applications. It can be used at strength levels in excess of 260,000 psi (18,300 kg/cm2). This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-339. Producer or source: Carpenter.

Sign in / Sign up

Export Citation Format

Share Document