ZA-27

Alloy Digest ◽  
1977 ◽  
Vol 26 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
General Purpose ◽  
Corrosion And Wear ◽  
Heavy Section ◽  
Thin Walled ◽  
Aluminum Copper Alloy ◽  
Lower Material

Abstract ZA-27 is a zinc-aluminum-copper alloy that offers exceptionally high strength (58,000 to 64,000 psi tensile strength as cast) at modest cost. It performs best in thin-walled castings (down to 0.10 inch) which means reduced weight and lower material costs when castings are redesigned. It is similar to the general-purpose ZA-12 alloy (Alloy Digest Zn-31, September 1977) except for its higher strength and elongation, but with higher casting temperatures and poor heavy-section castability. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fracture toughness and creep. It also includes information on corrosion and wear resistance as well as casting, forming, heat treating, machining, and surface treatment. Filing Code: Zn-32. Producer or source: Eastern Alloys Inc.. See also Alloy Digest Zn-50, June 1990.

UNS Z35840

Alloy Digest ◽  
1988 ◽  
Vol 37 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Zinc Alloy ◽  
Thin Walled ◽  
Aluminum Copper Alloy ◽  
Lower Material

Abstract UNS No. Z35840 is a zinc-aluminum-copper alloy that offers exceptionally high strength (58,000 to 64,000 psi tensile strength as cast) at modest cost. It performs best in thin-walled castings (down to 0.10 inch) which means reduced weight and lower material costs when castings are redesigned. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on corrosion and wear resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: Zn-44. Producer or source: Zinc alloy producers.

ZA-12

Alloy Digest ◽  
1977 ◽  
Vol 26 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Shear Strength ◽  
Cast Iron ◽  
High Strength ◽  
Heat Treating ◽  
General Purpose ◽  
Corrosion And Wear ◽  
Aluminum Castings ◽  
Moderate Cost

Abstract ZA-12 is a zinc-aluminum-copper foundry alloy recommended for general-purpose castings of high strength at moderate cost. Its properties are similar to those of cast iron; however, it was designed for use in nonferrous foundries to compete with cast-iron, bronze, brass and aluminum castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion and wear resistance as well as casting, forming, heat treating, machining, and surface treatment. Filing Code: Zn-31. Producer or source: Eastern Alloys Inc.. See also Alloy Digest Zn-49, May 1990.

UNS Z35630

Alloy Digest ◽  
1988 ◽  
Vol 37 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Shear Strength ◽  
High Strength ◽  
Heat Treating ◽  
General Purpose ◽  
Corrosion And Wear ◽  
Zinc Alloy ◽  
Aluminum Castings ◽  
Moderate Cost

Abstract UNS No. Z35630 is a zinc-aluminum-copper foundry alloy recommended for general-purpose castings of high strength at moderate cost. It was designed for use in nonferrous foundries to compete with cast-iron, bronze, brass and aluminum castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion and wear resistance as well as casting, forming, heat treating, machining, and surface treatment. Filing Code: Zn-43. Producer or source: Zinc alloy producers.

MONEL

Alloy Digest ◽  
1955 ◽  
Vol 4 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
General Purpose ◽  
International Nickel Company ◽  
Temperature Performance ◽  
Nickel Copper ◽  
Cold Worked

Abstract MONEL is a general purpose nickel-copper alloy having excellent combination of high strength, ductility and corrosion resistance. Cold-worked, welded and cast forms behave substantially the same under corrosive conditions. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-21. Producer or source: The International Nickel Company Inc..

MONEL ALLOY 400

Alloy Digest ◽  
1964 ◽  
Vol 13 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
General Purpose ◽  
Temperature Performance ◽  
Nickel Copper

Abstract MONEL alloy 400 is a general purpose nickel-copper alloy having excellent combination of high strength, ductility, and corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-93. Producer or source: Huntington Alloy Products Division.

R MONEL

Alloy Digest ◽  
1957 ◽  
Vol 6 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
General Purpose ◽  
International Nickel Company ◽  
Temperature Performance ◽  
Nickel Copper

Abstract R MONEL is a general purpose nickel-copper alloy having excellent combination of high strength, ductility and corrosion resistance. It is the free-cutting grade of Monel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-34. Producer or source: The International Nickel Company Inc..

ATLANTIC 13B ALLOY

Alloy Digest ◽  
1976 ◽  
Vol 25 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Silicon Bronze ◽  
Thin Walled ◽  
Engineering Corporation ◽  
Bronze Casting

Abstract ATLANTIC 13B Alloy is a silicon bronze casting alloy offering excellent castability and corrosion resistance, good machinability and medium-high strength. It is an all-purpose alloy that is suitable for gears, valve parts and marine fittings. It is especially useful in stress-corrosion environments for thin-walled parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-307. Producer or source: Atlantic Casting and Engineering Corporation.

AMPCOLOY 405

Alloy Digest ◽  
1962 ◽  
Vol 11 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Wear Resistant

Abstract Ampcoloy 405 is a high strength, ductile, corrosion and wear resistant copper alloy available in extruded solid bar form for gears, valve seats, marine hardware, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-116. Producer or source: Ampco Metal Inc..

COPPER ALLOY No. C86100

Alloy Digest ◽  
1986 ◽  
Vol 35 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Copper Alloy ◽  
Iron Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Good Combination ◽  
Good Resistance ◽  
Copper Zinc ◽  
Strengthening Element ◽  
Strength And Ductility

Abstract Copper Alloy No. C86100 is a copper-zinc-aluminum-manganese-iron alloy, sometimes classified as a high-strength yellow brass. The principal strengthening element is aluminum. Its tensile strength is typically 95,000 psi (655 MPa). It has a good combination of strength and ductility along with good resistance to corrosion. Its typical uses are marine castings, gears, gun mounts, bearing and bushings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-510. Producer or source: Copper alloy foundries.

ILZRO-12

Alloy Digest ◽  
1969 ◽  
Vol 18 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Zinc Alloy ◽  
Copper Base ◽  
Foundry Alloy ◽  
Lower Material

Abstract ILZRO-12 is a zinc-base foundry alloy recommended for general purpose castings. It has economic advantages by virtue of lower material costs and a lower casting temperature than competitive copper-base alloys. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on casting, heat treating, machining, and joining. Filing Code: Zn-12. Producer or source: Zinc and zinc alloy mills and foundries.

Sign in / Sign up

Export Citation Format

Share Document