ZA-12

Alloy Digest ◽  
1977 ◽  
Vol 26 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Shear Strength ◽  
Cast Iron ◽  
High Strength ◽  
Heat Treating ◽  
General Purpose ◽  
Corrosion And Wear ◽  
Aluminum Castings ◽  
Moderate Cost

Abstract ZA-12 is a zinc-aluminum-copper foundry alloy recommended for general-purpose castings of high strength at moderate cost. Its properties are similar to those of cast iron; however, it was designed for use in nonferrous foundries to compete with cast-iron, bronze, brass and aluminum castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion and wear resistance as well as casting, forming, heat treating, machining, and surface treatment. Filing Code: Zn-31. Producer or source: Eastern Alloys Inc.. See also Alloy Digest Zn-49, May 1990.

UNS Z35630

Alloy Digest ◽  
1988 ◽  
Vol 37 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Shear Strength ◽  
High Strength ◽  
Heat Treating ◽  
General Purpose ◽  
Corrosion And Wear ◽  
Zinc Alloy ◽  
Aluminum Castings ◽  
Moderate Cost

Abstract UNS No. Z35630 is a zinc-aluminum-copper foundry alloy recommended for general-purpose castings of high strength at moderate cost. It was designed for use in nonferrous foundries to compete with cast-iron, bronze, brass and aluminum castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion and wear resistance as well as casting, forming, heat treating, machining, and surface treatment. Filing Code: Zn-43. Producer or source: Zinc alloy producers.

MEEHANITE GD

Alloy Digest ◽  
1964 ◽  
Vol 13 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Shear Strength ◽  
Cast Iron ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Damping Capacity ◽  
Iron And Steel ◽  
Lubricating Properties

Abstract MEEHANITE-GD is a high strength iron casting having high damping capacity, self-lubricating properties, and good machinability. It combines the good properties of both cast iron and steel. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on casting, heat treating, machining, and joining. Filing Code: CI-32. Producer or source: Meehanite Metal Corporation.

MEEHANITE GA

Alloy Digest ◽  
1954 ◽  
Vol 3 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Shear Strength ◽  
Cast Iron ◽  
Physical Properties ◽  
Machine Tools ◽  
High Strength ◽  
Heat Treating ◽  
Damping Capacity ◽  
Iron And Steel ◽  
Lubricating Properties

Abstract MEEHANITE GA is a high strength iron casting having high damping capacity, self-lubricating properties, and good machinability. It combines the good properties of both cast iron and steel. Applications include machine tools, gears, shafts, and housings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on heat treating and machining. Filing Code: CI-5. Producer or source: Meehanite Metal Corporation.

PEARLITIC MALLEABLE IRON

Alloy Digest ◽  
1959 ◽  
Vol 8 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Cast Iron ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Malleable Iron

Abstract PEARLITIC MALLEABLE IRON is a high strength cast iron recommended for dependable service, strength and machinability in highly stressed parts at work in mobile and stationary mechanisms. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: CI-26. Producer or source: Albian Malleable Iron Company.

ZA-27

Alloy Digest ◽  
1977 ◽  
Vol 26 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
General Purpose ◽  
Corrosion And Wear ◽  
Heavy Section ◽  
Thin Walled ◽  
Aluminum Copper Alloy ◽  
Lower Material

Abstract ZA-27 is a zinc-aluminum-copper alloy that offers exceptionally high strength (58,000 to 64,000 psi tensile strength as cast) at modest cost. It performs best in thin-walled castings (down to 0.10 inch) which means reduced weight and lower material costs when castings are redesigned. It is similar to the general-purpose ZA-12 alloy (Alloy Digest Zn-31, September 1977) except for its higher strength and elongation, but with higher casting temperatures and poor heavy-section castability. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fracture toughness and creep. It also includes information on corrosion and wear resistance as well as casting, forming, heat treating, machining, and surface treatment. Filing Code: Zn-32. Producer or source: Eastern Alloys Inc.. See also Alloy Digest Zn-50, June 1990.

AISI No. 617

Alloy Digest ◽  
1969 ◽  
Vol 18 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Wear Resistance ◽  
High Strength ◽  
Heat Treating ◽  
General Purpose ◽  
Steel Mills ◽  
Temperature Performance ◽  
Heat Treated ◽  
Corrosion And Oxidation

Abstract AISI No. 617 is a general purpose hardenable stainless steel which can be heat treated to the highest hardness and strength level. It is recommended for many applications where corrosion and oxidation resistance coupled with high strength and wear resistance are required as in bearings, cams and rollers in aircraft and missile fields. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-231. Producer or source: Stainless steel mills.

MEEHANITE GC

Alloy Digest ◽  
1954 ◽  
Vol 3 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Shear Strength ◽  
Cast Iron ◽  
Physical Properties ◽  
Machine Tools ◽  
High Strength ◽  
Heat Treating ◽  
Damping Capacity ◽  
Iron And Steel ◽  
Lubricating Properties

Abstract MEEHANITE GC is a high strength iron casting having high damping capacity, self-lubricating properties, and good machinability. It combines the good properties of both cast iron and steel. Applications include machine tools, gears, shafts, housings, permanent molds, lathe beds, bases, pistons, and engine castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on heat treating and machining. Filing Code: CI-8. Producer or source: Meehanite Metal Corporation.

ROL-MAN

Alloy Digest ◽  
1964 ◽  
Vol 13 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Strength ◽  
Heat Treating ◽  
Manganese Steel ◽  
High Ductility ◽  
Austenitic Manganese Steel ◽  
Austenitic Manganese

Abstract Rol-Man is the wrought form of Hadfield's austenitic manganese steel. It has high strength, high ductility and excellent wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-169. Producer or source: Manganese Steel Forge Company.

REPUBLIC 100-AR

Alloy Digest ◽  
1974 ◽  
Vol 23 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Shear Strength ◽  
Yield Strength ◽  
Physical Properties ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Design Flexibility ◽  
Rolled Condition ◽  
Minimum Yield

Abstract REPUBLIC 100-AR was developed to provide a minimum yield strength of 100,000 psi in the as-rolled condition. It also has exceptional wear resistance, good toughness and design flexibility. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion and wear resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-307. Producer or source: Republic Steel Corporation.

HI-MAN

Alloy Digest ◽  
1965 ◽  
Vol 14 (9) ◽  
Keyword(s):  
Wear Resistance ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Atmospheric Corrosion ◽  
High Strength ◽  
Heat Treating ◽  
Bearing Steel ◽  
Corrosion And Wear ◽  
Steel Company ◽  
Welding Properties

Abstract Hi-Man is an intermediate manganese copper-bearing steel with high strength and resistance to abrasion and fatigue. It combines desirable atmospheric corrosion resistance with satisfactory welding properties. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on corrosion and wear resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-24. Producer or source: Inland Steel Company.

Sign in / Sign up

Export Citation Format

Share Document