UNS Z35630

Alloy Digest ◽  
1988 ◽  
Vol 37 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Shear Strength ◽  
High Strength ◽  
Heat Treating ◽  
General Purpose ◽  
Corrosion And Wear ◽  
Zinc Alloy ◽  
Aluminum Castings ◽  
Moderate Cost

Abstract UNS No. Z35630 is a zinc-aluminum-copper foundry alloy recommended for general-purpose castings of high strength at moderate cost. It was designed for use in nonferrous foundries to compete with cast-iron, bronze, brass and aluminum castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion and wear resistance as well as casting, forming, heat treating, machining, and surface treatment. Filing Code: Zn-43. Producer or source: Zinc alloy producers.

ZA-12

Alloy Digest ◽  
1977 ◽  
Vol 26 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Shear Strength ◽  
Cast Iron ◽  
High Strength ◽  
Heat Treating ◽  
General Purpose ◽  
Corrosion And Wear ◽  
Aluminum Castings ◽  
Moderate Cost

Abstract ZA-12 is a zinc-aluminum-copper foundry alloy recommended for general-purpose castings of high strength at moderate cost. Its properties are similar to those of cast iron; however, it was designed for use in nonferrous foundries to compete with cast-iron, bronze, brass and aluminum castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion and wear resistance as well as casting, forming, heat treating, machining, and surface treatment. Filing Code: Zn-31. Producer or source: Eastern Alloys Inc.. See also Alloy Digest Zn-49, May 1990.

UNS Z35840

Alloy Digest ◽  
1988 ◽  
Vol 37 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Zinc Alloy ◽  
Thin Walled ◽  
Aluminum Copper Alloy ◽  
Lower Material

Abstract UNS No. Z35840 is a zinc-aluminum-copper alloy that offers exceptionally high strength (58,000 to 64,000 psi tensile strength as cast) at modest cost. It performs best in thin-walled castings (down to 0.10 inch) which means reduced weight and lower material costs when castings are redesigned. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on corrosion and wear resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: Zn-44. Producer or source: Zinc alloy producers.

ILZRO-12

Alloy Digest ◽  
1969 ◽  
Vol 18 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Zinc Alloy ◽  
Copper Base ◽  
Foundry Alloy ◽  
Lower Material

Abstract ILZRO-12 is a zinc-base foundry alloy recommended for general purpose castings. It has economic advantages by virtue of lower material costs and a lower casting temperature than competitive copper-base alloys. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on casting, heat treating, machining, and joining. Filing Code: Zn-12. Producer or source: Zinc and zinc alloy mills and foundries.

ZA-27

Alloy Digest ◽  
1977 ◽  
Vol 26 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
General Purpose ◽  
Corrosion And Wear ◽  
Heavy Section ◽  
Thin Walled ◽  
Aluminum Copper Alloy ◽  
Lower Material

Abstract ZA-27 is a zinc-aluminum-copper alloy that offers exceptionally high strength (58,000 to 64,000 psi tensile strength as cast) at modest cost. It performs best in thin-walled castings (down to 0.10 inch) which means reduced weight and lower material costs when castings are redesigned. It is similar to the general-purpose ZA-12 alloy (Alloy Digest Zn-31, September 1977) except for its higher strength and elongation, but with higher casting temperatures and poor heavy-section castability. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fracture toughness and creep. It also includes information on corrosion and wear resistance as well as casting, forming, heat treating, machining, and surface treatment. Filing Code: Zn-32. Producer or source: Eastern Alloys Inc.. See also Alloy Digest Zn-50, June 1990.

AISI No. 617

Alloy Digest ◽  
1969 ◽  
Vol 18 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Wear Resistance ◽  
High Strength ◽  
Heat Treating ◽  
General Purpose ◽  
Steel Mills ◽  
Temperature Performance ◽  
Heat Treated ◽  
Corrosion And Oxidation

Abstract AISI No. 617 is a general purpose hardenable stainless steel which can be heat treated to the highest hardness and strength level. It is recommended for many applications where corrosion and oxidation resistance coupled with high strength and wear resistance are required as in bearings, cams and rollers in aircraft and missile fields. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-231. Producer or source: Stainless steel mills.

ROL-MAN

Alloy Digest ◽  
1964 ◽  
Vol 13 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Strength ◽  
Heat Treating ◽  
Manganese Steel ◽  
High Ductility ◽  
Austenitic Manganese Steel ◽  
Austenitic Manganese

Abstract Rol-Man is the wrought form of Hadfield's austenitic manganese steel. It has high strength, high ductility and excellent wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-169. Producer or source: Manganese Steel Forge Company.

REPUBLIC 100-AR

Alloy Digest ◽  
1974 ◽  
Vol 23 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Shear Strength ◽  
Yield Strength ◽  
Physical Properties ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Design Flexibility ◽  
Rolled Condition ◽  
Minimum Yield

Abstract REPUBLIC 100-AR was developed to provide a minimum yield strength of 100,000 psi in the as-rolled condition. It also has exceptional wear resistance, good toughness and design flexibility. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion and wear resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-307. Producer or source: Republic Steel Corporation.

TG 12 ZINC ALLOY

Alloy Digest ◽  
1981 ◽  
Vol 30 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Strength ◽  
Shear Strength ◽  
Physical Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Zinc Alloy ◽  
Permanent Mold ◽  
Die Cast ◽  
Malleable Iron

Abstract Tg-12 Zinc Alloy is the general-purpose, zinc-aluminum-copper foundry alloy. It can be sand, permanent-mold or die cast, has a modest cost and a tensile strength suitable for many applications where bronze and cast or malleable iron were traditionally used. Tg-12 is extremely resistant to galling, has natural lubricity and is thus well suited to lubricated bearing and bushing applications. Tg-12 is particularly well suited to liquid and gas-pressure applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on casting, forming, heat treating, machining, and surface treatment. Filing Code: Zn-37. Producer or source: Texasgulf Inc..

HI-MAN

Alloy Digest ◽  
1965 ◽  
Vol 14 (9) ◽  
Keyword(s):  
Wear Resistance ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Atmospheric Corrosion ◽  
High Strength ◽  
Heat Treating ◽  
Bearing Steel ◽  
Corrosion And Wear ◽  
Steel Company ◽  
Welding Properties

Abstract Hi-Man is an intermediate manganese copper-bearing steel with high strength and resistance to abrasion and fatigue. It combines desirable atmospheric corrosion resistance with satisfactory welding properties. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on corrosion and wear resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-24. Producer or source: Inland Steel Company.

TG 27 ZINC ALLOY

Alloy Digest ◽  
1981 ◽  
Vol 30 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Strength ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Cast Iron ◽  
High Strength ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Sand Cast ◽  
Structural Applications

Abstract Tg 27 Zinc Alloy is a zinc-aluminum-copper high-strength foundry alloy that is well suited to structural applications, once the exclusive domain of malleable and cast iron, bronzes and aluminum. Tg 27 offers an as-sand-cast tensile strength of 58,000 to 64,000 psi at modest costs. It is extremely resistant to galling because it has natural lubricity and is thus well suited to bearing and bushing applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and surface treatment. Filing Code: Zn-36. Producer or source: Texasgulf Inc..

Sign in / Sign up

Export Citation Format

Share Document