Applying Thermoplastic Powder by Flame Spraying on Various Types of Substrates

1996 ◽  
Author(s):  
R. Dominguez ◽  
F. Monerie ◽  
A. Vardelle ◽  
P. Fauchais
Keyword(s):  
Corrosion Resistance ◽  
Friction Coefficient ◽  
Erosion Resistance ◽  
Flame Spraying ◽  
Controlled Atmosphere ◽  
Polymeric Coatings ◽  
Low Friction ◽  
Ceramic Particles

Abstract Polymeric coatings are now widely used for their corrosion resistance, low friction coefficient against many materials, decorative properties but also, when doped with ceramic particles, their protection against slipping and their good erosion resistance. Compared to traditional means of deposition, flame spraying in controlled atmosphere extends the scope of their applications either for shapes that can be coated or for site deposition. The materials chosen for spraying were Rislan, Gotalene and Tefzel. In this paper are presented the flame spraying technique which was used and the parameters controlling particles melting as well as, the substrates on which coatings were achieved (metals, woods, concretes, ceramics...) and their preparation. A few applications are then described with for example coatings reinforced by ceramic particles against slipping in wet or greasy area.

Observation of Cracks of PEEK Polymer Thrust Bearings under Rolling Contact Fatigue in Water

2016 ◽  
Vol 703 ◽  
pp. 172-177 ◽  
Author(s):  
Xiao Chen Shi ◽  
Masaya Orito ◽  
Yuji Kashima ◽  
Koshiro Mizobe ◽  
Katsuyuki Kida
Keyword(s):  
Corrosion Resistance ◽  
Friction Coefficient ◽  
Cross Sections ◽  
Rolling Contact Fatigue ◽  
Contact Fatigue ◽  
Rolling Contact ◽  
Light Weight ◽  
Low Friction ◽  
High Corrosion Resistance ◽  
Thrust Bearings

Considering the advantages on light weight, low friction coefficient, high corrosion resistance and electric insulation, polymer bearings are widely used under certain environments, where the toughness like metal bearings is not necessary. In our previous study, it was concluded that the main reason for PEEK thrust bearings failure in water was flaking due to surface crack propagation. In the present study, crack observations were made on groove surfaces and cross sections along both radial and rolling directions in order to find the relation between cracks and flaking failures.

The Effect of Ni-P Alloy Pre-Plating on the Performance of Ni-P/Ni-P-PTFE Composite Coatings

2013 ◽  
Vol 561 ◽  
pp. 537-541 ◽  
Author(s):  
Jun Ying Hou ◽  
Song Rui Wang ◽  
Zhi Wei Zhou
Keyword(s):  
Corrosion Resistance ◽  
Friction Coefficient ◽  
Composite Coating ◽  
Composite Coatings ◽  
Low Friction ◽  
Excellent Performance ◽  
Ptfe Composite ◽  
Good Corrosion Resistance ◽  
Time Ratio ◽  
Composite Plating

In order to obtain more excellent performance of composite coating, a layer of Ni-P alloy was plated firstly, then Ni-P-PTFE composite coatings was plated. If plating time ratio of electroless plating Ni-P alloy and Ni-P-PTFE composite plating was properlly controlled, performance of pure Ni-P-PTFE composite coating could be improved. The study have shown that the total plating time is 2 hours, and the plating time ratio is 1:1, and good bonding strength with the substrate, right hardness, low friction coefficient, good corrosion resistance of Ni-P /Ni-P-PTFE composite coatings have been obtained.

OLIN ALLOY C72200

Alloy Digest ◽  
2006 ◽  
Vol 55 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Erosion Resistance ◽  
Heat Treating ◽  
Copper Nickel ◽  
Copper Nickel Alloy

Abstract Olin Alloy C72200 is a chromium-containing copper-nickel alloy used extensively in seawater. The alloy is used for its corrosion-erosion resistance and is often called Cupronickel with Cr. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CU-745. Producer or source: Olin Brass.

BRIDGEPORT 54

Alloy Digest ◽  
1964 ◽  
Vol 13 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Tensile Properties ◽  
Erosion Resistance ◽  
Heat Treating ◽  
Good Strength ◽  
High Corrosion ◽  
Copper Zinc ◽  
Strength And Ductility

Abstract Bridgeport 54 is a copper-zinc-aluminum alloy having high corrosion and erosion resistance combined with good strength and ductility. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating and machining. Filing Code: Cu-141. Producer or source: Bridgeport Brass Company.

Sign in / Sign up

Export Citation Format

Share Document