Influence of distributed power supply in distributed power distribution network

2021 ◽  
pp. 1-8
Author(s):  
Xin Shen ◽  
Hongchun Shu ◽  
Min Cao ◽  
Nan Pan ◽  
Junbin Qian
Keyword(s):  
Power Supply ◽  
Power Distribution ◽  
Short Circuit ◽  
Power Grid ◽  
Distribution Network ◽  
Distribution Networks ◽  
Power Supplies ◽  
Power Distribution Network ◽  
Power Sources ◽  
Distributed Power

In distribution networks with distributed power supplies, distributed power supplies can also be used as backup power sources to support the grid. If a distribution network contains multiple distributed power sources, the distribution network becomes a complex power grid with multiple power supplies. When a short-circuit fault occurs at a certain point on the power distribution network, the size, direction and duration of the short-circuit current are no longer single due to the existence of distributed power, and will vary with the location and capacity of the distributed power supply system. The change, in turn, affects the current in the grid, resulting in the generation and propagation of additional current. This power grid of power electronics will cause problems such as excessive standard mis-operation, abnormal heating of the converter and component burnout, and communication system failure. It is of great and practical significance to study the influence of distributed power in distributed power distribution networks.

scholarly journals Adaptive Current Protection Technology for Distribution Network with Distributed Power Sources Based on Local Information

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Shijie Cui ◽  
Peng Zeng ◽  
Zhongfeng Wang ◽  
Yue Zuo
Keyword(s):  
Power Supply ◽  
Power Distribution ◽  
Negative Impact ◽  
Short Circuit ◽  
Distribution Network ◽  
Local Information ◽  
Power Supplies ◽  
Power Sources ◽  
Distributed Power ◽  
Protection Technology

Because the distributed power supply is connected to the distribution network, its structure has also changed the original traditional method. The original single power supply method was originally used. The network provided is a radial network and it is connected to the distributed power supply. Later, it became a structure with small- and medium-sized power supplies inside, and its network power supply became dual or multiple power supplies. Such a structural change affected the coordination of power distribution protection devices, which would impose current on the distribution network. Protection has a negative impact. This paper aims to study the adaptive current protection technology of distribution network with distributed power based on local information. On the basis of analyzing the characteristics of distributed power, the classification of distributed power, and the operation mode of distributed power, according to the access of IIDG, as well as different influences of relay protection of distribution network, an improved protection scheme with adaptive current quick-break protection as the main protection is proposed, so that different fault characteristics of the distribution network have different setting values, and then simulation experiments are carried out on this scheme. The experimental results show that the setting value of three-phase short-circuit fault proposed in this paper can well protect the protection range, which is larger than the traditional protection setting and self-adaptive setting.

scholarly journals The Research of Short-circuit Calculation and Optimization of Contain Distributed Power Distribution Network

2019 ◽  
Vol 260 ◽  
pp. 01005
Author(s):  
Haiyang Yu ◽  
Guangxin Zu ◽  
Meilun Zhang ◽  
Zhipeng Liu ◽  
Guoliang Wu ◽  
...  
Keyword(s):  
Power Distribution ◽  
Optimization Design ◽  
Short Circuit ◽  
Power Grid ◽  
Rapid Development ◽  
Distribution Network ◽  
Power Industry ◽  
Power Distribution Network ◽  
Distributed Power ◽  
Short Circuit Calculation

Electric power industry as an indispensable energy supply in daily life and production, which is the main motive force of equipment operation in the industrial times. Therefore, in order to meet the development needs and ensure the safety of power supply, it is necessary to optimize and transform the power grid. So that energy conservation and security of supply and demand can be ensured. In this paper, the short-circuit calculation and optimization design of distributed power distribution network are studied deeply, aiming at improving the performance of power grid and promoting the rapid development and transformation of power industry.

Minimizing area of VLSI power distribution networks using river formation dynamics

2018 ◽  
Vol 20 (4) ◽  
pp. 417-429 ◽  
Author(s):  
Satyabrata Dash ◽  
Sukanta Dey ◽  
Deepak Joshi ◽  
Gaurav Trivedi
Keyword(s):  
Power Distribution ◽  
Large Scale ◽  
Distribution Network ◽  
Distribution Networks ◽  
Power Distribution Networks ◽  
Power Distribution Network ◽  
Content Type ◽  
Ir Drop ◽  
Formation Dynamics ◽  
River Formation Dynamics

Purpose The purpose of this paper is to demonstrate the application of river formation dynamics to size the widths of power distribution network for very large-scale integration designs so that the wire area required by power rails is minimized. The area minimization problem is transformed into a single objective optimization problem subject to various design constraints, such as IR drop and electromigration constraints. Design/methodology/approach The minimization process is carried out using river formation dynamics heuristic. The random probabilistic search strategy of river formation dynamics heuristic is used to advance through stringent design requirements to minimize the wire area of an over-designed power distribution network. Findings A number of experiments are performed on several power distribution benchmarks to demonstrate the effectiveness of river formation dynamics heuristic. It is observed that the river formation dynamics heuristic outperforms other standard optimization techniques in most cases, and a power distribution network having 16 million nodes is successfully designed for optimal wire area using river formation dynamics. Originality/value Although many research works are presented in the literature to minimize wire area of power distribution network, these research works convey little idea on optimizing very large-scale power distribution networks (i.e. networks having more than four million nodes) using an automated environment. The originality in this research is the illustration of an automated environment equipped with an efficient optimization technique based on random probabilistic movement of water drops in solving very large-scale power distribution networks without sacrificing accuracy and additional computational cost. Based on the computation of river formation dynamics, the knowledge of minimum area bounded by optimum IR drop value can be of significant advantage in reduction of routable space and in system performance improvement.

scholarly journals Adaptive Day-Ahead Prediction of Resilient Power Distribution Network Partitions

2021 ◽  
Author(s):  
Chinmay Shah ◽  
Richard Wies
Keyword(s):  
Power Distribution ◽  
Renewable Energy Sources ◽  
Optimization Technique ◽  
Distribution Network ◽  
Distribution Networks ◽  
Optimization Techniques ◽  
Power Distribution Networks ◽  
Power Distribution Network ◽  
High Penetration ◽  
Islanded Mode

The conventional power distribution network is being transformed drastically due to high penetration of renewable energy sources (RES) and energy storage. The optimal scheduling and dispatch is important to better harness the energy from intermittent RES. Traditional centralized optimization techniques limit the size of the problem and hence distributed techniques are adopted. The distributed optimization technique partitions the power distribution network into sub-networks which solves the local sub problem and exchanges information with the neighboring sub-networks for the global update. This paper presents an adaptive spectral graph partitioning algorithm based on vertex migration while maintaining computational load balanced for synchronization, active power balance and sub-network resiliency. The parameters that define the resiliency metrics of power distribution networks are discussed and leveraged for better operation of sub-networks in grid connected mode as well as islanded mode. The adaptive partition of the IEEE 123-bus network into resilient sub-networks is demonstrated in this paper.

Research on Single-Phase Grounding Fault in Distribution Networks with a DC Power Positioning Method

2014 ◽  
Vol 530-531 ◽  
pp. 353-356
Author(s):  
Run Sheng Li
Keyword(s):  
Power Distribution ◽  
Single Phase ◽  
Distribution Network ◽  
Distribution Networks ◽  
Power Distribution Network ◽  
Power Outage ◽  
Location Method ◽  
Fault Resistance ◽  
Ground Fault ◽  
Positioning Method

Due to the high ground fault resistance and the complexity of power distribution network structure (such as too many nodes, branches and too long lines), adopting common traveling wave method and ac injection method can not effectively locate the single-phase grounding fault in the distribution network system.To solve above problems and determine the position of the point of failure prisely, this paper adopted the dc location method of injecting the dc signal from the point of failure under the power outage offline. This paper introduces the single phase dc method and the method of three phase dc, and the simulation shows that the dc location method is effective and feasible.

Research on the Voltage Influence of Active Distribution Network with Distributed Generation Access

2014 ◽  
Vol 668-669 ◽  
pp. 749-752 ◽  
Author(s):  
Xiao Yi Zhou ◽  
Ling Yun Wang ◽  
Wen Yue Liang ◽  
Li Zhou
Keyword(s):  
Distributed Generation ◽  
Power Distribution ◽  
Distribution System ◽  
Power Flow ◽  
Distribution Network ◽  
Distribution Networks ◽  
Power Distribution Network ◽  
Active Distribution Network ◽  
Novel Approach ◽  
Active Distribution Networks

Distributed generation (DG) has an important influence on the voltage of active distribution networks. A unidirectional power distribution network will be transformed into a bidirectional, multiple power supply distribution network after DGs access to the distribution network and the direction of power flow is also changed. Considering the traditional forward and backward substitution algorithm can only deal with the equilibrium node and PQ nodes, so the other types of DGs should be transformed into PQ nodes, then its impact on active distribution network can be analyzed via the forward and backward substitution algorithm. In this paper, the characteristics of active distribution networks are analyzed firstly and a novel approach is proposed to convert PI nodes into PQ nodes. Finally, a novel forward and backward substitution algorithm is adopted to calculate the power flow of the active distribution network with DGs. Extensive validation of IEEE 18 and 33 nodes distribution system indicates that this method is feasible. Numerical results show that when DG is accessed to the appropriate location with proper capacity, it has a significant capability to support the voltages level of distribution system.

Sign in / Sign up

Export Citation Format

Share Document