2nd Dimensional GC-MS analysis of sweat volatile organic compounds prepared by solid phase micro-extraction

2014 ◽  
Vol 22 (3) ◽  
pp. 481-488 ◽  
Author(s):  
Mi-Jung Choi ◽  
Chang-Hwan Oh
Author(s):  
Antonia Flores ◽  
Silvia Sorolla ◽  
Concepció Casas ◽  
Rosa Cuadros ◽  
Anna Bacardit

Volatile organic compounds (VOCs) and Semi-Volatile Organic Compounds (SVOCs) arise from the chemicals used in the various stages of the leather manufacturing process. An important aim of the tanning industry is to minimize or eliminate VOCs and SVOCs, without lowering the quality of leather.   This paper shows the development of a new headspace-solid phase micro extraction coupled with gas chromatography–mass spectrometry (HS-SPME/GC-MS) method for the identification of VOCs and SVOCs emitted by newly designed polymers for the leather finishing operation. These new polymers are polyurethane resins designed to reduce the VOC and SVOC concentration. This method enables a simple and fast determination of the qualitative and semi-quantitative content of VOCs and SVOCs in polyurethane-type finishing resins. The chemicals that are of concern in this paper are the following: Dipropylene glycol Monomethyl Ether (DPGME), DBE-3 (a mixture of dibasic esters) and Triethylamine (TEA). The test conditions that have been determined to carry out the HS-SPME assay are the following: incubation time (2 hours), extraction temperature and time (40°C; 5 minutes) and the desorption conditions (280°C, 50 seconds).  Ten samples of laboratory scale resins were tested by HS-SPME followed by gas chromatography (GC-MS). DPGME and DBE-3 (a mixture of dimethyl adipate, dimethyl glutarate and dimethyl succinate) have been identified effectively. The compounds are identified by a quantitative method using external calibration curves for the target compounds. The technique is not effective to determine the TEA compound, since the chromatograms shown poor resolution peaks for the standard. 


Separations ◽  
2018 ◽  
Vol 5 (3) ◽  
pp. 45 ◽  
Author(s):  
Kevin Eckert ◽  
David Carter ◽  
Katelynn Perrault

Volatile organic compounds (VOCs) are monitored in numerous fields using several commercially-available sampling options. Sorbent-based sampling techniques, such as solid-phase microextraction (SPME), provide pre-concentration and focusing of VOCs prior to gas chromatography–mass spectrometry (GC–MS) analysis. This study investigated the dynamics of SPME Arrow, which exhibits an increased sorbent phase volume and improved durability compared to traditional SPME fibers. A volatile reference mixture (VRM) and saturated alkanes mix (SAM) were used to investigate optimal parameters for microbiological VOC profiling in combination with GC–MS analysis. Fiber type, extraction time, desorption time, carryover, and reproducibility were characterized, in addition to a comparison with traditional SPME fibers. The developed method was then applied to longitudinal monitoring of Bacillus subtilis cultures, which represents a ubiquitous microbe in medical, forensic, and agricultural applications. The carbon wide range/polydimethylsiloxane (CWR/PDMS) fiber was found to be optimal for the range of expected VOCs in microbiological profiling, and a statistically significant increase in the majority of VOCs monitored was observed. B. subtilis cultures released a total of 25 VOCs of interest, across three different temporal trend categories (produced, consumed, and equilibrated). This work will assist in providing foundational data for the use of SPME Arrow in future microbiological applications.


2010 ◽  
Vol 30 (4) ◽  
pp. 987-992 ◽  
Author(s):  
Eunice Valduga ◽  
Alexsandra Valerio ◽  
Helen Treichel ◽  
Irajá Nascimento Filho ◽  
Agenor Fúrigo Júnior ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document