scholarly journals USE OF CONIFEROUS WOOD BIOCHAR AS A SUBSTITUTE FUEL IN AN IRON ORE SINTERING PROCESS

2021 ◽  
Vol 72 (4) ◽  
pp. 2-14
Author(s):  
Marian Niesler ◽  
Janusz Stecko ◽  
Sławomir Stelmach
Keyword(s):  
Iron Ore ◽  
Chemical Processing ◽  
Sintering Process ◽  
Iron Ore Sintering ◽  
Sinter Strength ◽  
Iron Ore Sintering Process ◽  
Ore Sintering ◽  
Coniferous Wood ◽  
Positive Effect ◽  
Reducing Properties

The article presents the results of tests carried out at Łukasiewicz – IMŻ, in cooperation with the Institute for Chemical Processing of Coal, on the use of biochar from coniferous wood as a substitute fuel in the iron ore sintering process. It was found that, considering productivity, fuel consumption and properties of the obtained sinter, the content of the tested biochar should not exceed 10 wt% in total fuel. When using the tested biochar, the content of FeO in the sinter decreased. The sinter was characterised by better ISO T strength than when using only coke breeze. At the same time, the grindability of the ISO A sinter decreased with the increase in the content of the biochar in the total fuel. The use of the tested biochar can have a very positive effect on both the sinter strength and its reducing properties.

A novel performance assessment method of the carbon efficiency for iron ore sintering process

2021 ◽  
Vol 106 ◽  
pp. 44-53
Author(s):  
Kailong Zhou ◽  
Xin Chen ◽  
Min Wu ◽  
Yosuke Nakanishi ◽  
Weihua Cao ◽  
...  
Keyword(s):  
Performance Assessment ◽  
Iron Ore ◽  
Assessment Method ◽  
Sintering Process ◽  
Iron Ore Sintering ◽  
Carbon Efficiency ◽  
Iron Ore Sintering Process ◽  
Ore Sintering

scholarly journals Formation of Nitrogen Mono Oxide (NO) during Iron Ore Sintering Process

2018 ◽  
Vol 58 (2) ◽  
pp. 236-243 ◽  
Author(s):  
Wei Lv ◽  
Xiaohui Fan ◽  
Xiaobo Min ◽  
Min Gan ◽  
Xuling Chen ◽  
...  
Keyword(s):  
Iron Ore ◽  
Sintering Process ◽  
Iron Ore Sintering ◽  
Iron Ore Sintering Process ◽  
Ore Sintering

scholarly journals Speciation of PM2.5 Released from Iron Ore Sintering Process and Calculation of Elemental Equilibrium

2017 ◽  
Vol 57 (4) ◽  
pp. 673-680 ◽  
Author(s):  
Zhiyun Ji ◽  
Xiaohui Fan ◽  
Min Gan ◽  
Qiang Li ◽  
Xuling Chen ◽  
...  
Keyword(s):  
Iron Ore ◽  
Sintering Process ◽  
Iron Ore Sintering ◽  
Iron Ore Sintering Process ◽  
Ore Sintering

scholarly journals The use of ammonium sulfate as an inhibitor of dioxin synthesis in iron ore sintering process

2014 ◽  
Vol 21 (1) ◽  
pp. 59-70 ◽  
Author(s):  
Patrycja Łechtańska ◽  
Grzegorz Wielgosiński
Keyword(s):  
Ammonium Sulfate ◽  
Air Pollutants ◽  
Iron Ore ◽  
Sintering Process ◽  
Blast Furnace Process ◽  
Furnace Process ◽  
Iron Ore Sintering ◽  
Iron Ore Sintering Process ◽  
Ore Sintering ◽  
Main Component

Abstract The main air pollutants in the sintering process of iron ore are polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans (PCDD/Fs) and harmful dust. Ore sintering on sinter strands is one of the first technology steps in the ironworks. It is a process in which iron ore is crushed, subjected to annealing and mixed with appropriate additives, and then sintered in order to produce sinter which is the main component of iron in the blast furnace process. PCDD/Fs emissions were measured and the addition of ammonium sulfate as an inhibitor of the synthesis of dioxins in the sintering process of iron ore was studied.

Sign in / Sign up

Export Citation Format

Share Document