scholarly journals Reactor Pressure Vessel Steel Smart Behavior as Cause of Instability in Kinetics of Radiation Embrittlement

2019 ◽  
Vol 4 (2) ◽  
Keyword(s):  
Fast Neutron ◽  
Radiation Damage ◽  
Pressure Vessel ◽  
Radiation Stability ◽  
The Self ◽  
Radiation Embrittlement ◽  
Neutron Intensity ◽  
Rpv Steel ◽  
Kinetics Of ◽  
Reactor Pressure

Fast neutron intensity influence on reactor materials radiation damage is a critically important question in the problem of the correct use of the accelerated irradiation tests data for substantiation of the materials workability in real irradiation conditions that is low neutron intensity. Investigations of the fast neutron intensity (flux) influence on radiation damage and experimental data scattering reveal the existence of non-monotonous sections in kinetics of the reactor pressure vessels (RPV) steel damage. Discovery of the oscillations as indicator of the self-organization processes presence give reasons for new ways searching on reactor pressure vessel (RPV) steel radiation stability increasing and attempt of the self-restoring metal elaboration. Revealing of the wavelike process in the form of non monotonous parts of the kinetics of radiation embrittlement testifies that periodic transformation of the structure take place. This fact actualizes the problem of more precise definition of the RPV materials radiation embrittlement mechanisms and gives reasons for search of the ways to manage the radiation stability (nanostructuring and so on to stimulate the radiation defects annihilation), development of the means for creating of more stableness self recovering smart materials.

Effects of Neutron Irradiation on the Mechanical and Electromagnetic Properties of Reactor Pressure Vessel Steels

2017 ◽  
Author(s):  
Li Chengliang ◽  
Shu Guogang ◽  
Chen Jun ◽  
Liu Yi ◽  
Liu Wei ◽  
...  
Keyword(s):  
Neutron Irradiation ◽  
Pressure Vessel ◽  
Power Plants ◽  
Hysteresis Loops ◽  
Reactor Pressure Vessel ◽  
Electromagnetic Properties ◽  
Irradiation Damage ◽  
Indentation Hardness ◽  
Rpv Steel ◽  
Reactor Pressure

The effect of neutron irradiation damage of reactor pressure vessel (RPV) steels is a main failure mode. Accelerated neutron irradiation experiments at 292 °C were conducted on RPV steels, followed by testing of the mechanical, electrical and magnetic properties for both the unirradiated and irradiated steels in a hot laboratory. The results showed that a significant increase in the strength, an obvious decrease in toughness, a corresponding increase in resistivity, and the clockwise turn of the hysteresis loops, resulting in a slight decrease in saturation magnetization when the RPV steel irradiation damage reached 0.0409 dpa; at the same time, the variation rate of the resistivity between the irradiated and unirradiated RPV steels shows good agreement with the variation rates of the mechanical properties parameters, such as nano-indentation hardness, ultimate tensile strength, yield strength at 0.2% offset, upper shelf energy and reference nil ductility transition temperature. Thus, as a complement to destructive mechanical testing, the resistivity variation can be used as a potentially non-destructive evaluation technique for the monitoring of the RPV steel irradiation damage of operational nuclear power plants.

Attenuation of Radiation Damage and Neutron Field in Reactor Pressure Vessel Wall

2009 ◽  
pp. 190-190-6
Author(s):  
Milan Brumovsky ◽  
Milan Marek ◽  
Ladislav Zerola ◽  
Ladislav Viererbl ◽  
Victor N. Golovanov ◽  
...  
Keyword(s):  
Radiation Damage ◽  
Pressure Vessel ◽  
Vessel Wall ◽  
Neutron Field ◽  
Reactor Pressure Vessel ◽  
Reactor Pressure

Fracture Toughness of Highly Irradiated Pressure Vessel Steels in the Upper Shelf Temperature

2006 ◽  
Author(s):  
Hiroshi Matsuzawa ◽  
Toru Osaki
Keyword(s):  
Fracture Toughness ◽  
Chemical Composition ◽  
Reference Material ◽  
Fast Neutron ◽  
Pressure Vessel ◽  
Charpy Impact ◽  
Pressure Vessels ◽  
Shelf Energy ◽  
Pressure Vessel Steels ◽  
Reactor Pressure

Nine Reactor Pressure Vessel (RPV) Steels and four RPV weld were irradiated up to 1.2 × 1024n/m2 fast neutron fluence (E>1MeV), and their fracture toughness and Charpy impact energy were measured. As chemical compositions, such as Cu, are known to affect the fracture toughness reduction due to neutron exposure, the above steels were fabricated by changing chemical composition widely to cover the chemical composition of the RPV materials of the operating Japanese nuclear power plants. 2.7 mm thick compact specimens were used to measure the upper shelf fracture toughness of highly irradiated materials, and their Charpy upper shelf energy was also measured. By correlating Charpy upper shelf energy to fracture toughness, the upper shelf fracture toughness evaluation formulae for highly irradiated reactor pressure vessel steels were developed. Both compact and V-notched Charpy impact specimens were irradiated in a test reactor. The fast neutron flux above 1MeV was about 5 × 1016n/(m2s). Charpy impact specimens made of Japanese PWR reference material containing 0.09w% Cu were irradiated simultaneously. The upper shelf energy of the reference material up to the medium fluence level showed little difference in the reduction of upper shelf energy to that which had been in the operating plant and which was irradiated to the same fluence. The developed correlation formulae have been adopted in the Japan Electric Association Code as new formulae to predict the fracture toughness in the upper shelf region of reactor pressure vessels. They will be applied to time limited ageing analysis of low upper shelf reactor pressure vessels in Japan, on a concrete technical basis in very high fluence regions.

Fast Neutron Irradiation Optimization of Thorium-Fueled SCWR Reactor Pressure Vessel

2020 ◽  
Vol 6 (3) ◽  
Author(s):  
Petra Pónya ◽  
Gyula Csom ◽  
Sándor Fehér
Keyword(s):  
Neutron Flux ◽  
Fast Neutron ◽  
Neutron Irradiation ◽  
Pressure Vessel ◽  
Flow Direction ◽  
Reactor Pressure Vessel ◽  
Fast Neutron Flux ◽  
Inner Surface ◽  
Fast Neutron Irradiation ◽  
Reactor Pressure

Abstract Fast neutron irradiation causes embrittlement of the reactor pressure vessel (RPV) material; therefore, it may end operation life before design lifetime. Well-known method to recuperate crystal lattice dislocations is annealing. In the current version of thorium fueled supercritical water-cooled reactor (SCWR) design proposed by the Institute of Nuclear Technology at Budapest University of Technology and Economics (BME NTI), the supercritical fluid flows upward between the core barrel and the inner surface of the RPV thereby, the coolant would keep the RPV's temperature at ∼500 °C. This reverse coolant flow direction would decrease the embrittlement of RPV by constant annealing. To minimize the fast neutron flux increase, a relatively thin shielding connected to the inner surface of the barrel could be used. This presents fast neutron irradiation analysis, performed for different settings of the shielding to reduce fast neutron flux reaching the inner surface of RPV.

Fracture Mechanics Assessment of Reactor Pressure Vessel Irradiated Structural Steel for Short Column Type Supports and Neutron Shield Tank

2020 ◽  
Author(s):  
Alexandria M. Carolan ◽  
J. Brian Hall ◽  
Stephen K. Longwell ◽  
F. Arzu Alpan ◽  
Gregory M. Imbrogno ◽  
...  
Keyword(s):  
Fracture Mechanics ◽  
Structural Steel ◽  
Pressure Vessel ◽  
Radiation Effects ◽  
Structural Integrity ◽  
Reactor Pressure Vessel ◽  
Radiation Embrittlement ◽  
Short Column ◽  
License Renewal ◽  
Reactor Pressure

Abstract As plants apply for 80 year licensure (subsequent license renewal), the United States Nuclear Regulatory Commission (U.S. NRC) has queried the nuclear power plant industry to investigate the impact of neutron embrittlement (radiation effects) on the reactor pressure vessel (RPV) structural steel supports due to extended plant operation past 60 years. The radiation effects on RPV supports were previously investigated and resolved as part of Generic Safety Issue No. 15 (GSI-15) in NUREG-0933 Revision 3 [1], NUREG-1509 [2] (published in May 1996), and NUREG/CR-5320 [3] (published in January 1989) for design life (40 years) and for first license renewal (20 additional years). The conclusions in NUREG-0933, Revision 3 stated that there were no structural integrity concerns for the RPV support structural steels; even if all the supports were totally removed (i.e. broken), the piping has acceptable margin to carry the load of the vessel. Nevertheless, for plants applying for 80 year life licensure, the U.S. NRC has requested an evaluation to show structural integrity of the RPV supports by accounting for radiation embrittlement (radiation damage) for continued operation into the second license renewal period (i.e. 80 years). The RPV support designs in light water reactors are grouped into one of five categories or types of supports: (1) skirt; (2) long-column; (3) shield-tank; (4) short column; and (5) suspension. In this paper, two of these RPV support configurations (short column supports and neutron shield tank) will be investigated using fracture mechanics to evaluate the effect of radiation embrittlement of the structural steel supports for long term operations (i.e. 80 years). The technical evaluation of other support configurations will be provided in a separate technical publication at a future date.

Sign in / Sign up

Export Citation Format

Share Document