Corrosion Behavior of Carbon Steel Coated with a Zinc-Rich Paint Containing Aluminum Sulfate and Barium Oxide under Wet and Dry Cyclic Conditions

2021 ◽  
Vol 70 (10) ◽  
pp. 327-333
Author(s):  
Masato Yamashita ◽  
Masamitsu Takahashi ◽  
Hiroshi Deguchi ◽  
Yasunori Hayashi ◽  
Akihiko Kimura ◽  
...  
Keyword(s):  
Carbon Steel ◽  
Corrosion Behavior ◽  
Aluminum Sulfate ◽  
Barium Oxide

Corrosion Behavior of The Weld Zone of Carbon Steel Overpack for HLW Geological Disposal

2008 ◽  
Author(s):  
Yutaka Yokoyama ◽  
Rieko Takahashi ◽  
Hidekazu Asano ◽  
Naoki Taniguchi ◽  
Morimasa Naito
Keyword(s):  
Carbon Steel ◽  
Corrosion Behavior ◽  
Weld Zone ◽  
Geological Disposal

scholarly journals Electrodeposition of Magnetite on Carbon Steel in Fe(III)-Triethanolamine Solution and Its Corrosion Behavior

2015 ◽  
Vol 56 (7) ◽  
pp. 1107-1111 ◽  
Author(s):  
Soon-Hyeok Jeon ◽  
Geun-Dong Song ◽  
Do-Haeng Hur
Keyword(s):  
Carbon Steel ◽  
Corrosion Behavior

Evaluation Method for Time-Dependent Corrosion Behavior of Carbon Steel Plate Using Atmospheric Corrosion Monitoring Sensor

2009 ◽  
Vol 417-418 ◽  
pp. 417-420 ◽  
Author(s):  
Shigenobu Kainuma ◽  
Kunihiro Sugitani ◽  
Yoshihiro Ito ◽  
In Tae Kim
Keyword(s):  
Carbon Steel ◽  
Corrosion Behavior ◽  
Atmospheric Corrosion ◽  
Evaluation Method ◽  
Steel Plates ◽  
Time Dependent ◽  
Corrosion Monitoring ◽  
Corrosion Sensor ◽  
Atmospheric Exposure ◽  
Corrosive Environments

The purpose of this research is to propose a method for evaluating the time-dependent corrosion behavior of carbon steel plates using an atmospheric corrosion monitor (ACM) corrosion sensor consisting of a Fe/Ag-galvanic couple. Atmospheric exposure tests were carried out on steel　plates for periods of 6, 12, and 24-months on the island of Okinawa in Japan. The Specimens were mounted on racks at angles of 0, 45 and 90 to the horizontal to obtain corrosion data in various corrosive environments. In addition, the environments of the skyward- and groundward-facing surfaces of the specimens were monitored using ACM sensors. The sensor outputs were recorded during the exposure tests.

EIS study on the corrosion behavior of rusted carbon steel in 3% NaCl solution

2013 ◽  
Vol 60 (2) ◽  
pp. 100-105 ◽  
Author(s):  
Jiayuan Hu ◽  
Shun‐an Cao ◽  
Jianli Xie
Keyword(s):  
Carbon Steel ◽  
Corrosion Behavior ◽  
Nacl Solution

Electrochemical and corrosion behavior of carbon steel in SULFIRAN® process

2009 ◽  
Vol 162 (1) ◽  
pp. 40-46 ◽  
Author(s):  
J. Neshati ◽  
S. Sh. Abedi ◽  
Kh. Forsat ◽  
M. Hosseini Jenab ◽  
S. Mirfendereski
Keyword(s):  
Carbon Steel ◽  
Corrosion Behavior

scholarly journals Corrosion Behavior of Copper and Carbon Steel in Acidic Media

2014 ◽  
Vol 11 (4) ◽  
pp. 1577-1582
Author(s):  
Baghdad Science Journal
Keyword(s):  
Carbon Steel ◽  
Hydrochloric Acid ◽  
Sulphuric Acid ◽  
Corrosion Behavior ◽  
Effect Of Temperature ◽  
Acidic Media ◽  
Corrosion Rates ◽  
Weight Loss Method ◽  
Acid Environment ◽  
Loss Method

The corrosion behavior of copper and carbon steel in 1M concentration of hydrochloric acid (HCl) and sulphuric acid (H2SO4) has been studied. The corrosion inhibition of copper and carbon steel in 1M concentration of hydrochloric acid (HCl) and sulphuric acid (H2SO4) by Ciprofloxacin has been investigated. Specimens were exposed in the acidic media for 7 hours and corrosion rates evaluated by using the weight loss method. The effect of temperature (from 283 ºK to 333 ºK), pH (from 1to 6), inhibitor concentration (10-4 to 10-2) has been studied. It was observed that sulphuric acid environment was most corrosive to the metals because of its oxidizing nature, followed by hydrochloric acid. The rate of metal dissolution increased with increasing exposure time. Corrosion rates of carbon steel in the acidic media found to be higher.

Sign in / Sign up

Export Citation Format

Share Document