scholarly journals A Combined Citizen Science—Modelling Approach for NO2 Assessment in Torino Urban Agglomeration

Atmosphere ◽  
2020 ◽  
Vol 11 (7) ◽  
pp. 721 ◽  
Author(s):  
Matteo Bo ◽  
Pietro Salizzoni ◽  
Federica Pognant ◽  
Roberto Mezzalama ◽  
Marina Clerico

The #CHEARIATIRA citizen science campaign was developed in February 2019 in Torino (western part of the Po Valley megacity region). The aim of the campaign was public engagement with measuring NO2 concentrations in an urban area that often exceeds air quality standards. NO2 diffusion tubes were employed by citizens under our supervision. In this paper, we present the main outcomes of a combined approach between the #CHEARIATIRA campaign and the urban dispersion model SIRANE. The results were validated against the available public Air Quality Monitoring Stations (AQMS). The citizens’ passive samplers and the modelled data show a good response in central districts both during the campaign interval and by annual projection. Traffic hotspots and sensitive receptors (schools, hospital) have high concentrations of NO2. Most of the study area (83% of the tubes) is subject to an increased risk of premature death according to epidemiological literature.

2021 ◽  
Vol 52 (3) ◽  
Author(s):  
Celeste Righi Ricco ◽  
Alberto Finzi ◽  
Viviana Guido ◽  
Elisabetta Riva ◽  
Omar Ferrari ◽  
...  

Fertigation can be a suitable technique for utilizing digestate, minimizing nitrogen losses, and contributing to circularity within a farming system. For this purpose, digestate usually is first processed with a screw-press separator. However, further filtration is required to remove particles that could clog the nozzles of drip or sprinkling irrigation systems. Advanced filtration can be obtained using mechanical separation with screens having openings of 100- 300 μm. This operation can be another source of ammonia emission, but this aspect has not been adequately investigated. This study aimed to address this knowledge gap by evaluating the emissions from three different filtration systems for digestate. The study was conducted in three different farms located in Lombardy (Italy) using digestate to fertigate maize by drip irrigation (two farms) and pivot irrigation (one farm). Ammonia emissions were measured with passive samplers and the fluxes were examined using an inverse dispersion model implemented in Windtrax software. The emissions were measured both when the filtration systems were in operation and when they were switched off. Ammonia emissions (mean values between 375 and 876 μg NH3/m2/s) tended to increase during operation of the filtration systems. However, no significant differences were found in the emissions from active and inactive equipment on any of the farms. The emissions from the filtration systems were higher than from a storage tank (22-67 μg NH3/m2/s). However, the mean emissions amounted to only 0.3% of the nitrogen content of the digestate. These emissions can be considered irrelevant in the context of the whole management scheme for digestate. This work provides a first insight on ammonia emissions arising from advanced filtration of digestate, with specific reference to Po Valley farming systems. Further studies are required to improve knowledge about emissions from the entire digestate management process, including the treatments required for specific application techniques.


2021 ◽  
Author(s):  
Michael Weger ◽  
Bernd Heinold ◽  
Alfred Wiedensohler ◽  
Maik Merkel

Abstract. There is a gap between the need for city-wide air-quality simulations considering the intra-urban variability and mircoscale dispersion features and the computational capacities that conventional urban microscale models require. This gap can be bridged by targeting model applications on the gray zone situated between the mesoscale and large-eddy scale. The urban dispersion model CAIRDIO is a new contribution to the class of computational-fluid dynamics models operating in this scale range. It uses a diffuse-obstacle boundary method to represent buildings as physical obstacles at gray-zone resolutions in the order of tens of meters. The main objective of this approach is to find an acceptable compromise between computationally inexpensive grid sizes for spatially comprehensive applications and the required accuracy in the description of building and boundary-layer effects. For this purpose, CAIRDIO is applied in dispersion simulation of black carbon and particulate matter for an entire mid-size city using an uniform horizontal resolution of 40 m in this paper. For evaluation, the simulation results are compared with measurements from 5 operational air monitoring stations, which are representative for the urban background and high-traffic roads, respectively. Moreover, the comparison includes the mesoscale host simulation, which provides the boundary conditions. The temporal variability of the concentration measurements at the background sites was largely influenced only by the characteristics of the mixing layer. As a consequence, the model results were not significantly dependent on spatial resolution, so that the mesoscale simulation also performed reasonably well. At the traffic sites, however, concentrations were in addition markedly influenced by the proximity to road-traffic sources and the surrounding building environment. Here, the mesoscale simulation indiscriminately reproduced almost the same urban-background profiles, which resulted in a large positive model bias. On the other hand, the CAIRDIO simulation was able to respond to the significantly amplified diurnal variability with its pronounced rush-hour peaks. This resulted in a consistent improvement of the model deviation to mea- surements compared to the mesoscale simulation. Nevertheless, discrepancies to measurements remain in the 40 m-CAIRDIO simulation, e.g., an underestimation of peak concentrations at two traffic sites inside narrow street canyons. To further research resolution sensitivity, the horizontal grid spacing of locally nested CAIRDIO domains is refined down to 5 m. While for the street canyons the representation of peak concentrations can be improved using horizontal grid spacings of up to 10 m, no further improvements beyond this resolution can be observed. This suggests that the too low peak concentrations with the default grid spacing of 40 m result from an inadequate representation of the traffic emissions inside narrow street canyons. If the total gain in accuracy due to the grid refinements is put in relation to the remaining model error, the improvements are only modest. In conclusion, the proposed gray-scale modeling is a promising downscaling approach for urban air-quality applications. Nevertheless, the results also show that aspects other than the actual resolution of flow patterns and numerical effects can determine the simulations at the urban microscale.


2019 ◽  
Author(s):  
Matthias Karl ◽  
Sam-Erik Walker ◽  
Sverre Solberg ◽  
Martin O. P. Ramacher

Abstract. This paper describes the CityChem extension of the Eulerian urban dispersion model EPISODE. The development of the CityChem extension was driven by the need to apply the model in lower latitude cities with higher insolation than in northern European cities. The CityChem extension offers a more advanced treatment of the photochemistry in urban areas and entails specific developments within the sub-grid components for a more accurate representation of the dispersion in the proximity of urban emission sources. The WMPP (WORM Meteorological Pre-Processor) is used in the point source sub-grid model to calculate the wind speed at plume height. The simplified street canyon model (SSCM) is used in the line source sub-grid model to calculate pollutant dispersion in street canyons. The EPISODE-CityChem model integrates the CityChem extension in EPISODE, with the capability of simulating photochemistry and dispersion of multiple reactive pollutants within urban areas. The main focus of the model is the simulation of the complex atmospheric chemistry involved in the photochemical production of ozone in urban areas. EPISODE-CityChem was evaluated with a series of tests and with a first application to the air quality situation in the city of Hamburg, Germany. A performance analysis with the FAIRMODE DELTA Tool for the air quality in Hamburg showed that the model fulfils the model performance objectives for NO2 (hourly), O3 (daily max. of the 8-h running mean) and PM10 (daily mean) set forth in the Air Quality Directive, qualifying the model for use in policy applications. Observed levels of annual mean ozone at the five urban background stations in Hamburg are captured by the model within 15 %. Envisaged applications of the EPISODE-CityChem model are urban air quality studies, emission control scenarios in relation to traffic restrictions and the source attribution of sector-specific emissions to observed levels of air pollutants at urban monitoring stations.


2019 ◽  
Vol 12 (8) ◽  
pp. 3357-3399 ◽  
Author(s):  
Matthias Karl ◽  
Sam-Erik Walker ◽  
Sverre Solberg ◽  
Martin O. P. Ramacher

Abstract. This paper describes the CityChem extension of the Eulerian urban dispersion model EPISODE. The development of the CityChem extension was driven by the need to apply the model in largely populated urban areas with highly complex pollution sources of particulate matter and various gaseous pollutants. The CityChem extension offers a more advanced treatment of the photochemistry in urban areas and entails specific developments within the sub-grid components for a more accurate representation of dispersion in proximity to urban emission sources. Photochemistry on the Eulerian grid is computed using a numerical chemistry solver. Photochemistry in the sub-grid components is solved with a compact reaction scheme, replacing the photo-stationary-state assumption. The simplified street canyon model (SSCM) is used in the line source sub-grid model to calculate pollutant dispersion in street canyons. The WMPP (WORM Meteorological Pre-Processor) is used in the point source sub-grid model to calculate the wind speed at plume height. The EPISODE–CityChem model integrates the CityChem extension in EPISODE, with the capability of simulating the photochemistry and dispersion of multiple reactive pollutants within urban areas. The main focus of the model is the simulation of the complex atmospheric chemistry involved in the photochemical production of ozone in urban areas. The ability of EPISODE–CityChem to reproduce the temporal variation of major regulated pollutants at air quality monitoring stations in Hamburg, Germany, was compared to that of the standard EPISODE model and the TAPM (The Air Pollution Model) air quality model using identical meteorological fields and emissions. EPISODE–CityChem performs better than EPISODE and TAPM for the prediction of hourly NO2 concentrations at the traffic stations, which is attributable to the street canyon model. Observed levels of annual mean ozone at the five urban background stations in Hamburg are captured by the model within ±15 %. A performance analysis with the FAIRMODE DELTA tool for air quality in Hamburg showed that EPISODE–CityChem fulfils the model performance objectives for NO2 (hourly), O3 (daily max. of the 8 h running mean) and PM10 (daily mean) set forth in the Air Quality Directive, qualifying the model for use in policy applications. Envisaged applications of the EPISODE–CityChem model are urban air quality studies, emission control scenarios in relation to traffic restrictions and the source attribution of sector-specific emissions to observed levels of air pollutants at urban monitoring stations.


2020 ◽  
Vol 13 (9) ◽  
pp. 4323-4353
Author(s):  
Paul D. Hamer ◽  
Sam-Erik Walker ◽  
Gabriela Sousa-Santos ◽  
Matthias Vogt ◽  
Dam Vo-Thanh ◽  
...  

Abstract. This paper describes the Eulerian urban dispersion model EPISODE. EPISODE was developed to address a need for an urban air quality model in support of policy, planning, and air quality management in the Nordic, specifically Norwegian, setting. It can be used for the calculation of a variety of airborne pollutant concentrations, but we focus here on the implementation and application of the model for NO2 pollution. EPISODE consists of an Eulerian 3D grid model with embedded sub-grid dispersion models (e.g. a Gaussian plume model) for dispersion of pollution from line (i.e. roads) and point sources (e.g. chimney stacks). It considers the atmospheric processes advection, diffusion, and an NO2 photochemistry represented using the photostationary steady-state approximation for NO2. EPISODE calculates hourly air concentrations representative of the grids and at receptor points. The latter allow EPISODE to estimate concentrations representative of the levels experienced by the population and to estimate their exposure. This methodological framework makes it suitable for simulating NO2 concentrations at fine-scale resolution (<100 m) in Nordic environments. The model can be run in an offline nested mode using output concentrations from a global or regional chemical transport model and forced by meteorology from an external numerical weather prediction model; it also can be driven by meteorological observations. We give a full description of the overall model function and its individual components. We then present a case study for six Norwegian cities whereby we simulate NO2 pollution for the entire year of 2015. The model is evaluated against in situ observations for the entire year and for specific episodes of enhanced pollution during winter. We evaluate the model performance using the FAIRMODE DELTA Tool that utilises traditional statistical metrics, e.g. root mean square error (RMSE), Pearson correlation R, and bias, along with some specialised tests for air quality model evaluation. We find that EPISODE attains the DELTA Tool model quality objective in all of the stations we evaluate against. Further, the other statistical evaluations show adequate model performance but that the model scores greatly improved correlations during winter and autumn compared to the summer. We attribute this to the use of the photostationary steady-state scheme for NO2, which should perform best in the absence of local ozone photochemical production. Oslo does not comply with the NO2 annual limit set in the 2008/50/EC directive (AQD). NO2 pollution episodes with the highest NO2 concentrations, which lead to the occurrence of exceedances of the AQD hourly limit for NO2, occur primarily in the winter and autumn in Oslo, so this strongly supports the use of EPISODE for application to these wintertime events. Overall, we conclude that the model is suitable for an assessment of annual mean NO2 concentrations and also for the study of hourly NO2 concentrations in the Nordic winter and autumn environment. Further, in this work we conclude that it is suitable for a range of policy applications specific to NO2 that include pollution episode analysis, evaluation of seasonal statistics, policy and planning support, and air quality management. Lastly, we identify a series of model developments specifically designed to address the limitations of the current model assumptions. Part 2 of this two-part paper discusses the CityChem extension to EPISODE, which includes a number of implementations such as a more comprehensive photochemical scheme suitable for describing more chemical species and a more diverse range of photochemical environments, as well as a more advanced treatment of the sub-grid dispersion.


2009 ◽  
Vol 4 (1/2) ◽  
pp. 112
Author(s):  
Linda Passoni ◽  
Vanes Poluzzi ◽  
Marco Deserti ◽  
Enrico Minguzzi ◽  
Michele Stortini ◽  
...  

2019 ◽  
Author(s):  
Paul D. Hamer ◽  
Sam-Erik Walker ◽  
Gabriela Sousa-Santos ◽  
Matthias Vogt ◽  
Dam Vo-Thanh ◽  
...  

Abstract. This paper describes the Eulerian urban dispersion model EPISODE. EPISODE was developed to address a need for an urban air quality model in support of policy, planning, and air quality management in the Nordic, and, specifically, Norwegian setting. It can be used for the calculation of a variety of airborne pollutant concentrations, but we focus here on the implementation and application of the model for NO2 pollution. EPISODE consists of a Eulerian 3D grid model with embedded sub-grid dispersion models (e.g., a Gaussian plume model) for dispersion of pollution from line (i.e., roads) and point sources (e.g., chimney stacks). It considers the atmospheric processes advection, diffusion, and a NO2 photochemistry represented using the photostationary steady state approximation for NO2. EPISODE calculates hourly air concentrations representative of the grids and at receptor points. The latter allow EPISODE to estimate concentrations representative of the levels experienced by the population and to estimate their exposure. This methodological framework makes it suitable for simulating NO2 concentrations at fine scale resolution (


Sign in / Sign up

Export Citation Format

Share Document