scholarly journals The urban dispersion model EPISODE. Part 1: A Eulerian and subgrid-scale air quality model and its application in Nordic winter conditions

Author(s):  
Paul D. Hamer ◽  
Sam-Erik Walker ◽  
Gabriela Sousa-Santos ◽  
Matthias Vogt ◽  
Dam Vo-Thanh ◽  
...  

Abstract. This paper describes the Eulerian urban dispersion model EPISODE. EPISODE was developed to address a need for an urban air quality model in support of policy, planning, and air quality management in the Nordic, and, specifically, Norwegian setting. It can be used for the calculation of a variety of airborne pollutant concentrations, but we focus here on the implementation and application of the model for NO2 pollution. EPISODE consists of a Eulerian 3D grid model with embedded sub-grid dispersion models (e.g., a Gaussian plume model) for dispersion of pollution from line (i.e., roads) and point sources (e.g., chimney stacks). It considers the atmospheric processes advection, diffusion, and a NO2 photochemistry represented using the photostationary steady state approximation for NO2. EPISODE calculates hourly air concentrations representative of the grids and at receptor points. The latter allow EPISODE to estimate concentrations representative of the levels experienced by the population and to estimate their exposure. This methodological framework makes it suitable for simulating NO2 concentrations at fine scale resolution (

2020 ◽  
Vol 13 (9) ◽  
pp. 4323-4353
Author(s):  
Paul D. Hamer ◽  
Sam-Erik Walker ◽  
Gabriela Sousa-Santos ◽  
Matthias Vogt ◽  
Dam Vo-Thanh ◽  
...  

Abstract. This paper describes the Eulerian urban dispersion model EPISODE. EPISODE was developed to address a need for an urban air quality model in support of policy, planning, and air quality management in the Nordic, specifically Norwegian, setting. It can be used for the calculation of a variety of airborne pollutant concentrations, but we focus here on the implementation and application of the model for NO2 pollution. EPISODE consists of an Eulerian 3D grid model with embedded sub-grid dispersion models (e.g. a Gaussian plume model) for dispersion of pollution from line (i.e. roads) and point sources (e.g. chimney stacks). It considers the atmospheric processes advection, diffusion, and an NO2 photochemistry represented using the photostationary steady-state approximation for NO2. EPISODE calculates hourly air concentrations representative of the grids and at receptor points. The latter allow EPISODE to estimate concentrations representative of the levels experienced by the population and to estimate their exposure. This methodological framework makes it suitable for simulating NO2 concentrations at fine-scale resolution (<100 m) in Nordic environments. The model can be run in an offline nested mode using output concentrations from a global or regional chemical transport model and forced by meteorology from an external numerical weather prediction model; it also can be driven by meteorological observations. We give a full description of the overall model function and its individual components. We then present a case study for six Norwegian cities whereby we simulate NO2 pollution for the entire year of 2015. The model is evaluated against in situ observations for the entire year and for specific episodes of enhanced pollution during winter. We evaluate the model performance using the FAIRMODE DELTA Tool that utilises traditional statistical metrics, e.g. root mean square error (RMSE), Pearson correlation R, and bias, along with some specialised tests for air quality model evaluation. We find that EPISODE attains the DELTA Tool model quality objective in all of the stations we evaluate against. Further, the other statistical evaluations show adequate model performance but that the model scores greatly improved correlations during winter and autumn compared to the summer. We attribute this to the use of the photostationary steady-state scheme for NO2, which should perform best in the absence of local ozone photochemical production. Oslo does not comply with the NO2 annual limit set in the 2008/50/EC directive (AQD). NO2 pollution episodes with the highest NO2 concentrations, which lead to the occurrence of exceedances of the AQD hourly limit for NO2, occur primarily in the winter and autumn in Oslo, so this strongly supports the use of EPISODE for application to these wintertime events. Overall, we conclude that the model is suitable for an assessment of annual mean NO2 concentrations and also for the study of hourly NO2 concentrations in the Nordic winter and autumn environment. Further, in this work we conclude that it is suitable for a range of policy applications specific to NO2 that include pollution episode analysis, evaluation of seasonal statistics, policy and planning support, and air quality management. Lastly, we identify a series of model developments specifically designed to address the limitations of the current model assumptions. Part 2 of this two-part paper discusses the CityChem extension to EPISODE, which includes a number of implementations such as a more comprehensive photochemical scheme suitable for describing more chemical species and a more diverse range of photochemical environments, as well as a more advanced treatment of the sub-grid dispersion.


2019 ◽  
Vol 12 (8) ◽  
pp. 3357-3399 ◽  
Author(s):  
Matthias Karl ◽  
Sam-Erik Walker ◽  
Sverre Solberg ◽  
Martin O. P. Ramacher

Abstract. This paper describes the CityChem extension of the Eulerian urban dispersion model EPISODE. The development of the CityChem extension was driven by the need to apply the model in largely populated urban areas with highly complex pollution sources of particulate matter and various gaseous pollutants. The CityChem extension offers a more advanced treatment of the photochemistry in urban areas and entails specific developments within the sub-grid components for a more accurate representation of dispersion in proximity to urban emission sources. Photochemistry on the Eulerian grid is computed using a numerical chemistry solver. Photochemistry in the sub-grid components is solved with a compact reaction scheme, replacing the photo-stationary-state assumption. The simplified street canyon model (SSCM) is used in the line source sub-grid model to calculate pollutant dispersion in street canyons. The WMPP (WORM Meteorological Pre-Processor) is used in the point source sub-grid model to calculate the wind speed at plume height. The EPISODE–CityChem model integrates the CityChem extension in EPISODE, with the capability of simulating the photochemistry and dispersion of multiple reactive pollutants within urban areas. The main focus of the model is the simulation of the complex atmospheric chemistry involved in the photochemical production of ozone in urban areas. The ability of EPISODE–CityChem to reproduce the temporal variation of major regulated pollutants at air quality monitoring stations in Hamburg, Germany, was compared to that of the standard EPISODE model and the TAPM (The Air Pollution Model) air quality model using identical meteorological fields and emissions. EPISODE–CityChem performs better than EPISODE and TAPM for the prediction of hourly NO2 concentrations at the traffic stations, which is attributable to the street canyon model. Observed levels of annual mean ozone at the five urban background stations in Hamburg are captured by the model within ±15 %. A performance analysis with the FAIRMODE DELTA tool for air quality in Hamburg showed that EPISODE–CityChem fulfils the model performance objectives for NO2 (hourly), O3 (daily max. of the 8 h running mean) and PM10 (daily mean) set forth in the Air Quality Directive, qualifying the model for use in policy applications. Envisaged applications of the EPISODE–CityChem model are urban air quality studies, emission control scenarios in relation to traffic restrictions and the source attribution of sector-specific emissions to observed levels of air pollutants at urban monitoring stations.


2006 ◽  
Vol 40 ◽  
pp. 563-573 ◽  
Author(s):  
Sun-Kyoung Park ◽  
Charles Evan Cobb ◽  
Katherine Wade ◽  
James Mulholland ◽  
Yongtao Hu ◽  
...  

2021 ◽  
Author(s):  
Jacinta Edebeli ◽  
Curdin Spirig ◽  
Julien Anet

&lt;p&gt;The fifth version of the Emission Database for Global Atmospheric Research (EDGAR 5.0) provides an impressive inventory of various pollutants. Pollutants from different emission sectors are available with daily, monthly and yearly temporal profiles at a high global resolution of 0.1&amp;#176;&amp;#215;0.1&amp;#176;. Although this resolution has been sufficient for regional air quality studies, the emissions appeared to be too coarse for local air quality studies in areas with complex topography. With Switzerland as a case study, we present our approach for downscaling EDGAR emission data to a much finer resolution of 0.02&amp;#176;&amp;#215;0.02&amp;#176; with the aim of modelling local air quality.&lt;/p&gt;&lt;p&gt;We downscaled the EDGAR emissions using a combination of GIS tools including QGIS, ArcGIS, and a series of python scripts. We obtained the surface coverage of different land use features within the defined EDGAR emission sectors from Open Street Map (OSM) using the &lt;em&gt;QuickOSM&lt;/em&gt; tool in QGIS. With the calculated local surface area coverage of the emissions sectors, we downscaled the EDGAR inventory data within ArcGIS using a set of developed Arcpy script tools.&lt;/p&gt;&lt;p&gt;The outcome was a much finer resolved emission dataset which we fed into the WRF-CHEM air quality model within a pilot project. A comparison of the modelled pollutant concentrations using the two datasets (original EDGAR data and the downscaled data) shows an improved agreement between the downscaled dataset and the measurement data.&lt;/p&gt;&lt;p&gt;Studies investigating the impact of urbanization, land use change or traffic pattern on air quality may benefit from our downscaling solution, which, thanks to the global coverage of OSM, can be globally applied.&lt;/p&gt;


Author(s):  
Rajmal Jat ◽  
Veerendra Sahu ◽  
Bhola Ram Gurjar

Exposure analysis is the receptor-oriented approach of the pollution-level measurement. In this chapter, a detailed discussion is provided of the fundamentals of exposure analysis, methods of measurement, basics of models used for the prediction of pollution concentration indoors and outdoors, and a brief discussion about the health impact of selected pollutants. A detail of fundamental of indoor air quality (IAQ) models like mass balance and CFD models is discussed. Also, basic structures of community multiscale air quality model (CMAQ) and AIRMOD ambient air dispersion models are described. It is observed that measurement of pollution exposure by direct method requires more time and effort as compared with the integrated exposure and stationary measurement. AIRMODE is steady state model and based upon the Gaussian dispersion model. CMAQ is capable of simulating the pollution level for the range of geographic scale for multiple pollutants.


Energies ◽  
2020 ◽  
Vol 13 (12) ◽  
pp. 3120 ◽  
Author(s):  
Michał Piasecki ◽  
Krystyna Kostyrko

When planning the energy demand of ventilation, proper consideration should be given to the possible scenarios of indoor air quality and pollutant concentrations. The purpose of the present research is to create a practical method of prioritising indoor air pollutants, considering technical, economical and health aspects, in the Indoor Air Quality model (IAQ). In order to find the global weights for the combined IAQindex model sub-elements (in practice, air pollutant concentrations), the Multi-Criteria Decision Making (MCDM) approach is used. The authors have approached the problem of a weighting scheme in a model such as the complex model of the IAQ related to making decisions with many criteria and with the Multi-Attribute Decision Making MADM approach (specifically MCDM). The basis of the MADM method is a decision matrix constructed rationally by the authors, which includes six attributes: actual indoor air carbon dioxide concentration, total volatile organic compounds (TVOCs) and formaldehyde HCHO concentration, and their anthropogenic and construction product emissions to the indoor environment. The decision model of IAQindex includes five alternatives (possible situations), and the combination of pollutant concentration attributes with additional emission attributes is related to the indoor environment under specific situation. For defining the weights of criteria, the authors provide objective approaches: (i) entropy-based approach considering measuring the amount of information, and (ii) CRITIC, a statistic-based approach. The value of the presented method, i.e., the determination of global weights for IAQ components, is shown as a practical application to determine IAQ and the Indoor Environmental Quality (IEQ) index for an office building used as a case study.


Sign in / Sign up

Export Citation Format

Share Document