scholarly journals Non-Interventional and High-Precision Temperature Measurement Biochips for Long-Term Monitoring the Temperature Fluctuations of Individual Cells

Biosensors ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 454
Author(s):  
Danhong Han ◽  
Jingjing Xu ◽  
Han Wang ◽  
Zhenhai Wang ◽  
Nana Yang ◽  
...  

Monitoring the thermal responses of individual cells to external stimuli is essential for studies of cell metabolism, organelle function, and drug screening. Fluorescent temperature probes are usually employed to measure the temperatures of individual cells; however, they have some unavoidable problems, such as, poor stability caused by their sensitivity to the chemical composition of the solution and the limitation in their measurement time due to the short fluorescence lifetime. Here, we demonstrate a stable, non-interventional, and high-precision temperature-measurement chip that can monitor the temperature fluctuations of individual cells subject to external stimuli and over a normal cell life cycle as long as several days. To improve the temperature resolution, we designed temperature sensors made of Pd–Cr thin-film thermocouples, a freestanding Si3N4 platform, and a dual-temperature control system. Our experimental results confirm the feasibility of using this cellular temperature-measurement chip to detect local temperature fluctuations of individual cells that are 0.3–1.5 K higher than the ambient temperature for HeLa cells in different proliferation cycles. In the future, we plan to integrate this chip with other single-cell technologies and apply it to research related to cellular heat-stress response.

2016 ◽  
Vol 53 (8) ◽  
pp. 080604
Author(s):  
于波 Yu Bo ◽  
景明勇 Jing Mingyong ◽  
胡建勇 Hu Jianyong ◽  
张国峰 Zhang Guofeng ◽  
肖连团 Xiao Liantuan ◽  
...  

2013 ◽  
Vol 423-426 ◽  
pp. 2559-2562 ◽  
Author(s):  
Long Liu ◽  
Yun Cui Zhang ◽  
Shen Hua ◽  
Jun Xiao ◽  
Li Jia Huang

This article describes the design of High-Precision Temperature Measurement System based on C8051F350 and PT100. The system consists of the control circuit, temperature sensors, signal amplification circuit, field bus interface circuit. The system adopts constant current source method and a differential measurement circuit. A 24-bit A/D built in the CPU is used to sample the data and Non-linear compensation by software algorithms for it. The design improves the accuracy of the temperature measurement system.


Sign in / Sign up

Export Citation Format

Share Document