scholarly journals Operational Modal Analysis and Non-Linear Dynamic Simulations of a Prototype Low-Rise Masonry Building

Buildings ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 471
Author(s):  
Ilaria Capanna ◽  
Riccardo Cirella ◽  
Angelo Aloisio ◽  
Franco Di Di Fabio ◽  
Massimo Fragiacomo

This paper focuses on the dynamic behaviour of a low-rise masonry building representing the Italian residential heritage through experimental and numerical analyses. The authors discuss an application of combined Operational Modal Analysis and Finite Element Model updating for indirect estimation of the structural parameters. Two ambient vibration tests were carried out to estimate the structure’s dynamic behaviour in operational conditions. The first experimental setup consisted of accelerometers gathered in a row along the first floor to characterize the local dynamic of the floor. Conversely, the second setup had the accelerometers placed at the building’s corners to characterize the global dynamics. The outcomes of the first setup were used to estimate the mechanical parameters of the floor, while the ones form the second were used to characterize the mechanical parameters of the masonry piers. Therefore, two finite element models were implemented: (i) a single beam with an equivalent section of the floor to grasp the local behaviour of the investigated horizontal structure; (ii) an equivalent frame model of the entire building to characterise the global dynamic behaviour. The model updating process was developed in two phases to seize local and global dynamic responses. The updated numerical model formed the basis for a sensitivity analysis using the modelling parameters. The authors chose to delve into the influence of the floor on the dynamic behaviour of low-rise masonry buildings. With this aim, non-linear dynamic analyses were carried out under different mechanical characteristics of floors, expressing the scatter for ordinary masonry buildings. The displacements’ trends along the height of the building evidenced the notable role of the floor’s stiffness in the non-linear dynamic behaviour of the building. Lastly, the authors derived the fragility curves predicting the seismic performance in failure probability under a highly severe damage state.

2020 ◽  
Vol 14 (3) ◽  
pp. 7141-7151 ◽  
Author(s):  
R. Omar ◽  
M. N. Abdul Rani ◽  
M. A. Yunus

Efficient and accurate finite element (FE) modelling of bolted joints is essential for increasing confidence in the investigation of structural vibrations. However, modelling of bolted joints for the investigation is often found to be very challenging. This paper proposes an appropriate FE representation of bolted joints for the prediction of the dynamic behaviour of a bolted joint structure. Two different FE models of the bolted joint structure with two different FE element connectors, which are CBEAM and CBUSH, representing the bolted joints are developed. Modal updating is used to correlate the two FE models with the experimental model. The dynamic behaviour of the two FE models is compared with experimental modal analysis to evaluate and determine the most appropriate FE model of the bolted joint structure. The comparison reveals that the CBUSH element connectors based FE model has a greater capability in representing the bolted joints with 86 percent accuracy and greater efficiency in updating the model parameters. The proposed modelling technique will be useful in the modelling of a complex structure with a large number of bolted joints.


1989 ◽  
Vol 3 (1) ◽  
pp. 37-54 ◽  
Author(s):  
M. Mertens ◽  
H. Van der Auweraer ◽  
P. Vanherck ◽  
R. Snoeys

2008 ◽  
Vol 43 (6) ◽  
pp. 551-561 ◽  
Author(s):  
Carlos E.N. Mazzilli ◽  
César T. Sanches ◽  
Odulpho G.P. Baracho Neto ◽  
Marian Wiercigroch ◽  
Marko Keber

2018 ◽  
Vol 11 ◽  
pp. 331-338 ◽  
Author(s):  
Pietro Croce ◽  
Maria Luisa Beconcini ◽  
Paolo Formichi ◽  
Paolo Cioni ◽  
Filippo Landi ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document