scholarly journals High-Speed Railway

Encyclopedia ◽  
2021 ◽  
Vol 1 (3) ◽  
pp. 665-688
Author(s):  
Inara Watson
Keyword(s):  
High Speed ◽  
Weight Ratio ◽  
Rolling Stock ◽  
High Speed Railway ◽  
Signalling System ◽  
Railway System ◽  
Speed Up ◽  
Signalling Systems

Union Internationale des Chemins (UIC) defines the high-speed railway (HSR) as a high-speed railway system that contains the infrastructure and the rolling stock. The infrastructure can be newly built dedicated lines enabled for trains to travel with speed above 250 km/h or upgraded conventional lines with a speed up to 200 or even 220 km/h. HSR requires specially built trains with increased power to weight ratio and must have an in-cab signalling system as traditional signalling systems are incapable of above 200 km/h.

Experimental Study on the Dynamic Deformation of Simply Supported Beam in Chinese High-speed Railway

2018 ◽  
Author(s):  
Gonglian Dai ◽  
Meng Wang ◽  
Tianliang Zhao ◽  
Wenshuo Liu
Keyword(s):  
High Speed ◽  
Structure Design ◽  
Dynamic Coefficient ◽  
Bridge Structure ◽  
High Speed Railway ◽  
Simply Supported Beam ◽  
Vertical Stiffness ◽  
Simply Supported ◽  
Speed Up ◽  
Design Speed

<p>At present, Chinese high-speed railway operating mileage has exceeded 20 thousand km, and the proportion of the bridge is nearly 50%. Moreover, high-speed railway design speed is constantly improving. Therefore, controlling the deformation of the bridge structure strictly is particularly important to train speed-up as well as to ensure the smoothness of the line. This paper, based on the field test, shows the vertical and transverse absolute displacements of bridge structure by field collection. What’s more, resonance speed and dynamic coefficient of bridge were studied. The results show that: the horizontal and vertical stiffness of the bridge can meet the requirements of <b>Chinese “high-speed railway design specification” (HRDS)</b>, and the structure design can be optimized. However, the dynamic coefficient may be greater than the specification suggested value. And the simply supported beam with CRTSII ballastless track has second-order vertical resonance velocity 306km/h and third-order transverse resonance velocity 312km/h by test results, which are all coincide with the theoretical resonance velocity.</p>

Improving the Efficiency of High-Speed AC Contact Suspension

2021 ◽  
Vol 5 (5) ◽  
pp. 39-43
Author(s):  
Maksim V. SHEVLYUGIN ◽  
◽  
Daria V. SEMENOVA ◽  
Keyword(s):  
Power Supply ◽  
High Speed ◽  
Single Phase ◽  
New Technologies ◽  
Alternating Current ◽  
Rolling Stock ◽  
New Materials ◽  
High Speed Railway ◽  
Electric Rolling Stock ◽  
Electrified Railways

When developing a high-speed contact suspension for railways electrified with alternating current, it is important to ensure that the electric rolling stock passes the neutral insert without turning off the current and without reducing the speed of movement. The article provides an analysis of previously developed devices in the field of power supply of electrified railways of single-phase alternating current, in which an attempt was made to pass an electric rolling stock of a neutral insert without disconnecting the load. The device of isolating coupling of a catenary and a neutral insert for high-speed railway lines electrified on alternating current is described. In this case, the passage of the neutral insert is carried out under current and braking of the electric rolling stock will not occur. Among other things, to improve the efficiency of high-speed contact suspension for railways electrified with alternating current, it is proposed to use new materials and new technologies that can be used in the device of insulating coupling of the catenary

scholarly journals Aerodynamic Phenomena Caused by the Passage of a Train. Part 2: Pressure Influence on Passing Trains

2021 ◽  
Vol 65 (192) ◽  
pp. 195-202
Author(s):  
Andrzej Zbieć
Keyword(s):  
High Speed ◽  
Rolling Stock ◽  
Literature Analysis ◽  
High Speed Railway ◽  
Railway Vehicles ◽  
Effect Of Pressure ◽  
Pressure Changes

In the series of articles describing the aerodynamic phenomena caused by the passage of a train, the effects of a train running at high speed on itself, on other trains, on objects on the track and on people are characterized. This impact can be of two types – generated pressure and slipstream. Apart from the literature analysis, the author’s research is also taken into account. The second part presents the effect of pressure changes on the front and side surfaces of passing trains. Conclusions concerning side windows and windscreens in high-speed railway vehicles and older type railway vehicles with lower allowable speeds and the possibility of using various rolling stock on the same lines are presented. Keywords: rolling stock, high-speed railways, aerodynamic phenomena

Dynamic Analysis of Steering Bogies

2016 ◽  
pp. 524-579 ◽  
Author(s):  
Arun K. Samantaray ◽  
Smitirupa Pradhan
Keyword(s):  
High Speed ◽  
Ride Comfort ◽  
Lateral Force ◽  
Rolling Stock ◽  
Wheel Wear ◽  
Active Steering ◽  
Load Fluctuation ◽  
Speed Up ◽  
Turning Radius ◽  
Secondary Suspension

Running times of high-speed rolling stock can be reduced by increasing running speed on curved portions of the track. During curving, flange contact causes large lateral force, high frequency noises, flange wears and wheel load fluctuation at transition curves. To avoid derailment and hunting, and to improve ride comfort, i.e., to improve the curving performances at high speed, forced/active steering bogie design is studied in this chapter. The actively steered bogie is able to negotiate cant excess and deficiency. The bogie performance is studied on flexible irregular track with various levels of cant and wheel wear. The bogie and coach assembly models are developed in Adams VI-Rail software. This design can achieve operating speed up to 360 km/h on standard gauge ballasted track with 150mm super-elevation, 4km turning radius and 460m clothoid type entry curve design. The key features of the designed bogie are the graded circular wheel profiles, air-spring secondary suspension, chevron springs in the primary suspension, anti-yaw and lateral dampers, and the steering linkages.

Applicability analysis of high-speed railway system under the action of near-fault ground motion

2020 ◽  
Vol 139 ◽  
pp. 106289
Author(s):  
Lizhong Jiang ◽  
Jian Yu ◽  
Wangbao Zhou ◽  
Wangji Yan ◽  
Zhipeng Lai ◽  
...  
Keyword(s):  
Ground Motion ◽  
High Speed ◽  
High Speed Railway ◽  
Near Fault ◽  
Railway System ◽  
Near Fault Ground Motion

scholarly journals A discussion on technologies for improving the operational speed of high-speed railway networks

2019 ◽  
Vol 1 (1) ◽  
pp. 22-36 ◽  
Author(s):  
Chun-fang Lu
Keyword(s):  
High Speed ◽  
Rapid Development ◽  
Practical Significance ◽  
Railway Network ◽  
High Speed Railway ◽  
Development Status ◽  
Improvement Plan ◽  
Railway System ◽  
Traction Power Supply ◽  
Traction Power

Abstract: China’s high-speed railway network has already achieved speeds of 350 km/h; however, this could be further increased to 400 km/h. After considering the development status and technical level of the high-speed railway system in China, this study indicates that there are four key technologies involved in improving its operational speed: the track, the electrical moving unit, the control system and the traction power supply. Through an experimental analysis, an evaluation index for the high-speed railway is then constructed based on four aspects: safety, comfort, intelligence and environmental protection. Using this system, the rationality of the high-speed railway speed-improvement plan can be scientifically evaluated. The results are of practical significance to the Chinese railway administration, as they can be used to formulate specific plans to increase rail speeds, and therefore promote the rapid development of the high-speed railway network in China.

Sign in / Sign up

Export Citation Format

Share Document