scholarly journals Anhysteretic Magnetization Measurement Methods for Soft Magnetic Materials

Materials ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2021 ◽  
Author(s):  
Michał Nowicki
Keyword(s):  
Magnetic Materials ◽  
Magnetization Curve ◽  
Nanocrystalline Material ◽  
Magnetization Measurement ◽  
Soft Magnetic Materials ◽  
New Method ◽  
Soft Magnetic ◽  
Zn Ferrite ◽  
Anhysteretic Magnetization ◽  
Speed And Accuracy

This article is concerned with the methods for experimentally determining the Anhysteretic Magnetization curve for soft magnetic materials. A new method based on the modern hysteresisgraph system is presented. Known modern and traditional methods based on fluxmeters are presented as well. The experimental results obtained with the described methods for isotropic Mn–Zn ferrite are compared. Lastly, results of validation on NANOPERM® nanocrystalline material are detailed and show negligible hysteresis. The new method allows for accurate Anhysteretic Magnetization curve measurement without software or hardware modifications of standard, commercially available hysteresisgraph systems. The speed and accuracy of the results are improved in comparison with other methods.

Modeling of the Temperature Dependence of Soft Magnetic Materials

2020 ◽  
Author(s):  
Gereon Goldbeck ◽  
Gerd Bramerdorfer ◽  
Wolfgang Amrhein ◽  
Josef Hinterdorfer ◽  
Bernhard Weis
Keyword(s):  
Temperature Dependence ◽  
Magnetic Materials ◽  
Soft Magnetic Materials ◽  
Soft Magnetic

scholarly journals Effect of the Temperature on the Magnetic and Energetic Properties of Soft Magnetic Composite Materials

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4400
Author(s):  
Luca Ferraris ◽  
Fausto Franchini ◽  
Emir Pošković ◽  
Marco Actis Grande ◽  
Róbert Bidulský
Keyword(s):  
Magnetic Materials ◽  
Eddy Currents ◽  
Electrical Machines ◽  
Soft Magnetic Materials ◽  
Magnetic Composite ◽  
Soft Magnetic ◽  
Soft Magnetic Composite ◽  
Magnetic Performance ◽  
Magnetic Circuits ◽  
Energetic Characterization

In recent years, innovative magnetic materials have been introduced in the field of electrical machines. In the ambit of soft magnetic materials, laminated steels guarantee good robustness and high magnetic performance but, in some high-frequency applications, can be replaced by Soft Magnetic Composite (SMC) materials. SMC materials allow us to reduce the eddy currents and to design innovative 3D magnetic circuits. In general, SMCs are characterized at room temperature, but as electrical machines operate at high temperature (around 100 °C), an investigation analysis of the temperature effect has been carried out on these materials; in particular, three SMC samples with different binder percentages and process parameters have been considered for magnetic and energetic characterization.

Sign in / Sign up

Export Citation Format

Share Document