Traditional Artificial Neural Networks Versus Deep Learning in Optimization of Material Aspects of 3D Printing

3D printing of assistive devices requires optimization of material selection, raw materials formulas, and complex printing processes that have to balance a high number of variable but highly correlated variables. The performance of patient-specific 3D printed solutions is still limited by both the increasing number of available materials with different properties (including multi-material printing) and the large number of process features that need to be optimized. The main purpose of this study is to compare the optimization of 3D printing properties toward the maximum tensile force of an exoskeleton sample based on two different approaches: traditional artificial neural networks (ANNs) and a deep learning (DL) approach based on convolutional neural networks (CNNs). Compared with the results from the traditional ANN approach, optimization based on DL decreased the speed of the calculations by up to 1.5 times with the same print quality, improved the quality, decreased the MSE, and a set of printing parameters not previously determined by trial and error was also identified. The above-mentioned results show that DL is an effective tool with significant potential for wide application in the planning and optimization of material properties in the 3D printing process. Further research is needed to apply low-cost but more computationally efficient solutions to multi-tasking and multi-material additive manufacturing.

Download Full-text

Convolutional deep-learning artificial neural networks

Journal of Optical Technology ◽

10.1364/jot.82.000499 ◽

2015 ◽

Vol 82 (8) ◽

pp. 499 ◽

Cited By ~ 3

Author(s):

V. P. Lutsiv

Keyword(s):

Neural Networks ◽

Artificial Neural Networks ◽

Deep Learning ◽

Artificial Neural

Download Full-text

SỬ DỤNG DEEP NEURAL NETWORKS PHÁT HIỆN GAI ĐỘNG KINH TRONG BẢN GHI EEG

Journal of Military Science and Technology ◽

10.54939/1859-1043.j.mst.70.2020.77-84 ◽

2020 ◽

pp. 77-84

Author(s):

Xuyến

Keyword(s):

Neural Networks ◽

Artificial Neural Networks ◽

Deep Learning ◽

Deep Neural Networks ◽

Artificial Neural

Deep Neural Networks là một thuật toán dạy cho máy học, là phương pháp nâng cao của mạng nơ-ron nhân tạo (Artificial Neural Networks) nhiều tầng để học biểu diễn mô hình đối tượng. Bài báo trình bày phương pháp để phát hiện spike tự động, giải quyết bài toán cho các bác sỹ khi phân tích dữ liệu khổng lồ được thu thập từ bản ghi điện não để xác định một khu vực của não gây ra chứng động kinh. Hàng triệu mẫu được phân tích thủ công đã được đào tạo lại để tìm các gai liêp tiếp phát ra từ vùng não bị ảnh hưởng. Để đánh giá phương pháp đề xuất, tác giả đã xây dựng hệ thống trong đó sử dụng một số mô hình deep learning đưa vào thử nghiệm hỗ trợ các bác sỹ khám phát hiện và chẩn đoán sớm bệnh.

Download Full-text

KLASIFIKASI BATIK RIAU DENGAN MENGGUNAKAN CONVOLUTIONAL NEURAL NETWORKS (CNN)

Jurnal Ilmu Komputer ◽

10.33060/jik/2020/vol9.iss1.144 ◽

2020 ◽

Vol 9 (1) ◽

pp. 7-10

Author(s):

Hendry Fonda

Keyword(s):

Neural Network ◽

Neural Networks ◽

Artificial Neural Networks ◽

Deep Learning ◽

Convolutional Neural Networks ◽

18Th Century ◽

The Public ◽

Artificial Neural ◽

The Difference ◽

Fully Connected

ABSTRACT Riau batik is known since the 18th century and is used by royal kings. Riau Batik is made by using a stamp that is mixed with coloring and then printed on fabric. The fabric used is usually silk. As its development, comparing Javanese batik with riau batik Riau is very slowly accepted by the public. Convolutional Neural Networks (CNN) is a combination of artificial neural networks and deeplearning methods. CNN consists of one or more convolutional layers, often with a subsampling layer followed by one or more fully connected layers as a standard neural network. In the process, CNN will conduct training and testing of Riau batik so that a collection of batik models that have been classified based on the characteristics that exist in Riau batik can be determined so that images are Riau batik and non-Riau batik. Classification using CNN produces Riau batik and not Riau batik with an accuracy of 65%. Accuracy of 65% is due to basically many of the same motifs between batik and other batik with the difference lies in the color of the absorption in the batik riau. Kata kunci: Batik; Batik Riau; CNN; Image; Deep Learning ABSTRAK Batik Riau dikenal sejak abad ke 18 dan digunakan oleh bangsawan raja. Batik Riau dibuat dengan menggunakan cap yang dicampur dengan pewarna kemudian dicetak di kain. Kain yang digunakan biasanya sutra. Seiring perkembangannya, dibandingkan batik Jawa maka batik Riau sangat lambat diterima oleh masyarakat. Convolutional Neural Networks (CNN) merupakan kombinasi dari jaringan syaraf tiruan dan metode deeplearning. CNN terdiri dari satu atau lebih lapisan konvolutional, seringnya dengan suatu lapisan subsampling yang diikuti oleh satu atau lebih lapisan yang terhubung penuh sebagai standar jaringan syaraf. Dalam prosesnya CNN akan melakukan training dan testing terhadap batik Riau sehingga didapat kumpulan model batik yang telah terklasi fikasi berdasarkan ciri khas yang ada pada batik Riau sehingga dapat ditentukan gambar (image) yang merupakan batik Riau dan yang bukan merupakan batik Riau. Klasifikasi menggunakan CNN menghasilkan batik riau dan bukan batik riau dengan akurasi 65%. Akurasi 65% disebabkan pada dasarnya banyak motif yang sama antara batik riau dengan batik lainnya dengan perbedaan terletak pada warna cerap pada batik riau. Kata kunci: Batik; Batik Riau; CNN; Image; Deep Learning

Download Full-text

Forecasting the volume of raw materials procurement on the territory of communities using artificial neural networks

Bulletin of Lviv National Agrarian University. Agroengineering Research ◽

10.31734/agroengineering2020.24.143 ◽

2020 ◽

Vol 24 (1) ◽

pp. 143-151

Author(s):

A. Tryhuba ◽

◽

I. Tryhuba ◽

R. Chubyk ◽

I. Kondysiuk ◽

...

Keyword(s):

Neural Networks ◽

Artificial Neural Networks ◽

Raw Materials ◽

Artificial Neural

Download Full-text

Convolutional Neural Network

10.4018/978-1-6684-2408-7.ch077 ◽

2022 ◽

pp. 1559-1575

Author(s):

Mário Pereira Véstias

Keyword(s):

Neural Network ◽

Machine Learning ◽

Neural Networks ◽

Artificial Neural Networks ◽

Deep Learning ◽

Convolutional Neural Network ◽

Machine Learning Algorithms ◽

Training Data ◽

Machine Learning Model ◽

Artificial Neural

Machine learning is the study of algorithms and models for computing systems to do tasks based on pattern identification and inference. When it is difficult or infeasible to develop an algorithm to do a particular task, machine learning algorithms can provide an output based on previous training data. A well-known machine learning model is deep learning. The most recent deep learning models are based on artificial neural networks (ANN). There exist several types of artificial neural networks including the feedforward neural network, the Kohonen self-organizing neural network, the recurrent neural network, the convolutional neural network, the modular neural network, among others. This article focuses on convolutional neural networks with a description of the model, the training and inference processes and its applicability. It will also give an overview of the most used CNN models and what to expect from the next generation of CNN models.

Download Full-text