scholarly journals Quantitative Evaluation of Carbon Fiber Dispersion in Amorphous Calcium Silicate Hydrate-Based Contact-Hardening Composites

Molecules ◽  
2021 ◽  
Vol 26 (3) ◽  
pp. 726
Author(s):  
Guangxiang Ji ◽  
Guangqi Xiong ◽  
Xiaoqin Peng ◽  
Shuping Wang ◽  
Chong Wang ◽  
...  
Keyword(s):  
Electrical Resistivity ◽  
Carbon Fiber ◽  
Calcium Silicate ◽  
Calcium Silicate Hydrate ◽  
Fiber Content ◽  
Fiber Dispersion ◽  
High Fiber ◽  
Maximum Value ◽  
Subsequent Decrease ◽  
Solid Composites

Carbon fiber dispersion has a substantial influence on the properties of amorphous calcium silicate hydrate-based contact-hardening composites. In this study, a mixture of carbon fiber and calcium silicate hydrate powder was compressed into solid composites at 40 MPa for one minute. The mechanical properties and electrical resistivity of the solid materials were measured, and the dispersion of carbon fibers was quantitatively evaluated by digital image processing technology. The Taipalu model was used to build the correlation between the electrical resistivity of the composites and the carbon fiber dispersion. The results of the electrical resistivity showed that the down threshold of carbon fiber content in the contact-hardening composites was 1.0 wt.% and the electrical resistivity was 30,000 Ω·cm. As the fiber content increased to 2.0 wt.%, the electrical resistivity dropped to 2550 Ω·cm, which was attributed to the increase in fiber dispersion uniformity in the solid composites, and the value of the fiber distribution coefficient reached a maximum value of 0.743. A subsequent decrease in the uniformity of the fiber dispersion was observed at a high fiber content. In addition, the carbon fiber content showed a slight influence on the fiber orientation in the contact-hardening composites.

Study on the Produce Process and Electrical Resistivity of Carbon Fiber Conductive Concrete

2014 ◽  
Vol 960-961 ◽  
pp. 14-17 ◽  
Author(s):  
Ting Ding ◽  
Yan Liu
Keyword(s):  
Electrical Resistivity ◽  
Carbon Fiber ◽  
Percolation Threshold ◽  
Fiber Content ◽  
Fiber Concrete

This paper studied the produce process of carbon fiber concrete and the workability of carbon fiber conductive concrete (CFCC) by changing the fiber content as well. Based on a proper process, the electrical resistivity of CFCC in different CF continents was discussed and the percolation threshold was obtained.

Multiple ions transport and interaction in calcium silicate hydrate gel nanopores: Effects of saturation and tortuosity

2021 ◽  
Vol 283 ◽  
pp. 122638
Author(s):  
Zhiyong Liu ◽  
Yuncheng Wang ◽  
Dong Xu ◽  
Chuyue Zang ◽  
Yunsheng Zhang ◽  
...  
Keyword(s):  
Calcium Silicate ◽  
Calcium Silicate Hydrate ◽  
Ions Transport

scholarly journals Absorption and Strength Properties of Short Carbon Fiber Reinforced Mortar Composite

Buildings ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 300
Author(s):  
Md. Safiuddin ◽  
George Abdel-Sayed ◽  
Nataliya Hearn
Keyword(s):  
Tensile Strength ◽  
Carbon Fiber ◽  
Water Absorption ◽  
Carbon Fibers ◽  
Strength Properties ◽  
Fiber Content ◽  
Test Results ◽  
Air Content ◽  
Entrapped Air ◽  
Short Carbon

This paper presents the water absorption and strength properties of short carbon fiber reinforced mortar (CFRM) composite. Four CFRM composites with 1%, 2%, 3%, and 4% short pitch-based carbon fibers were produced in this study. Normal Portland cement mortar (NCPM) was also prepared for use as the control mortar. The freshly mixed mortar composites were tested for workability, wet density, and entrapped air content. In addition, the hardened mortar composites were examined for compressive strength, splitting tensile strength, flexural strength, and water absorption at the ages of 7 and 28 days. The effects of different carbon fiber contents on the tested properties were observed. Test results showed that the incorporation of carbon fibers decreased the workability and wet density, but increased the entrapped air content in mortar composite. Most interestingly, the compressive strength of CFRM composite increased up to 3% carbon fiber content and then it declined significantly for 4% fiber content, depending on the workability and compaction of the mortar. In contrast, the splitting tensile strength and flexural strength of the CFRM composite increased for all fiber contents due to the greater cracking resistance and improved bond strength of the carbon fibers in the mortar. The presence of short pitch-based carbon fibers significantly strengthened the mortar by bridging the microcracks, resisting the propagation of these minute cracks, and impeding the growth of macrocracks. Furthermore, the water absorption of CFRM composite decreased up to 3% carbon fiber content and then it increased substantially for 4% fiber content, depending on the entrapped air content of the mortar. The overall test results suggest that the mortar with 3% carbon fibers is the optimum CFRM composite based on the tested properties.

scholarly journals Mechanical Properties of Carbon-Fiber RPC and Design Method of Carbon-Fiber Content under Different Curing Systems

Materials ◽  
2019 ◽  
Vol 12 (22) ◽  
pp. 3759 ◽  
Author(s):  
Xuejian Zhang ◽  
Lincai Ge ◽  
Yunlong Zhang ◽  
Jing Wang
Keyword(s):  
Carbon Fiber ◽  
Design Method ◽  
Fiber Content ◽  
Practical Application ◽  
X Ray Diffraction ◽  
Curing Conditions ◽  
Influencing Mechanism ◽  
Reactive Powder ◽  
Curing Compound ◽  
Curing Systems

Natural, standard, and compound curing are adopted to study the effect of different curing systems on the reinforcement of carbon fiber in reactive powder concrete (RPC). This work systematically studies the changes in RPC compressive and tensile strengths under different curing systems. Taking age, fiber content, and curing system as parameters, Scanning electron microscope (SEM) and X-ray diffraction (XRD) microscopic methods are used to study the influencing mechanism of carbon-fiber content and curing systems on RPC. The calculation methods of the RPC strength of different carbon-fiber contents are studied. Results show that the optimum carbon-fiber content of carbon-fiber RPC is 0.75% under the natural, standard, and compound curing conditions. In comparison with standard curing, compound curing can improve the early strength of carbon-fiber RPC and slightly affect the improvement of late strength. The strength is slightly lower in natural curing than in standard curing, but the former basically meets the requirements of the project and is beneficial for the practical application of this project. The calculation formula of 28-day compressive and splitting tensile strengths of carbon-fiber content from 0% to 0.75% is proposed to select the carbon-fiber content flexibly to satisfy different engineering requirements.

Sign in / Sign up

Export Citation Format

Share Document