scholarly journals Engineering Core-Shell Structures of Magnetic Ferrite Nanoparticles for High Hyperthermia Performance

Nanomaterials ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 991 ◽  
Author(s):  
Mohamed S. A. Darwish ◽  
Hohyeon Kim ◽  
Hwangjae Lee ◽  
Chiseon Ryu ◽  
Jae Young Lee ◽  
...  

Magnetic ferrite nanoparticles (MFNs) with high heating efficiency are highly desirable for hyperthermia applications. As conventional MFNs usually show low heating efficiency with a lower specific loss power (SLP), extensive efforts to enhance the SLP of MFNs have been made by varying the particle compositions, sizes, and structures. In this study, we attempted to increase the SLP values by creating core-shell structures of MFNs. Accordingly, first we synthesized three different types of core ferrite nanoparticle of magnetite (mag), cobalt ferrite (cf) and zinc cobalt ferrite (zcf). Secondly, we synthesized eight bi-magnetic core-shell structured MFNs; Fe3O4@CoFe2O4 (mag@cf1, mag@cf2), CoFe2O4@Fe3O4 (cf@mag1, cf@mag2), Fe3O4@ZnCoFe2O4 (mag@zcf1, mag@zcf2), and ZnCoFe2O4@Fe3O4 (zcf@mag1, zcf@mag2), using a modified controlled co-precipitation process. SLP values of the prepared core-shell MFNs were investigated with respect to their compositions and core/shell dimensions while varying the applied magnetic field strength. Hyperthermia properties of the prepared core-shell MFNs were further compared to commercial magnetic nanoparticles under the safe limits of magnetic field parameters (<5 × 109 A/(m·s)). As a result, the highest SLP value (379.2 W/gmetal) was obtained for mag@zcf1, with a magnetic field strength of 50 kA/m and frequency of 97 kHz. On the other hand, the lowest SLP value (1.7 W/gmetal) was obtained for cf@mag1, with a magnetic field strength of 40 kA/m and frequency of 97 kHz. We also found that magnetic properties and thickness of the shell play critical roles in heating efficiency and hyperthermia performance. In conclusion, we successfully enhanced the SLP of MFNs by engineering their compositions and dimensions.

2012 ◽  
Vol 17 ◽  
pp. 115-126 ◽  
Author(s):  
Noorhana Yahya ◽  
Muhammad Kashif ◽  
Nadeem Nasir ◽  
Majid Niaz Akhtar ◽  
Noorasikin Mohd Yusof

This Paper Describes the Synthesis of Cobalt Ferrite (CoFe2O4) Nanoparticles and their Application in Enhanced Oil Recovery. Cobalt Ferrite (CoFe2O4) Nanoparticles Were Used as Ferrite Magnetic Feeders with Antenna to Improve the Magnetic Field Strength and Cobalt Ferrite Nanofluid to Improve Oil Recovery. Cobalt Ferrite (CoFe2O4) Nanoparticles Were Synthesized by Sol-Gel Method. these Nanoparticles Were then Characterized by Using X-Ray Diffractometer (XRD) and Field Emission Scanning Electron Microscope (FESEM). Cobalt Ferrite Nanoparticles Annealed at 600oC, the Particle Size Is 51.17nm and 26nm as Determined by XRD and FESEM, Respectively while for the Sample Annealed at 800oC, the Particle Size Is 62nm as Determined by XRD and 60 Nm as Determined by FESEM. Magnetic Measurement Results Show that Initial Permeability of Cobalt Ferrite Powder Increased and Relative Loss Factor Decreased at High Frequency. in Order to Improve the Oil Recovery, Nanoparticles Were Used in Two Different Experiments. in the First Experiment, Nanoparticles Were Used as Magnetic Feeders with an Antenna to Improve the Magnetic Field Strength. in the Second Experiment, Nanoparticles Were Used as Nanofluids. Results Show that the Antenna with Magnetic Feeders Increases the Magnetic Field Strength by 0.94% as Compared to Antenna without Magnetic Feeders in the Water, and by 5.90% in the Air. Magnitude versus Offset (MVO) Study of Antenna with Magnetic Feeders Shows an Increase in Magnetic Field Strength of 275% as Compared to Antenna without Magnetic Feeders. it Is Found that Antenna with Magnetic Feeders Was Able to Recover 29.50% and 20.82% of Original Oil in Place (OOIP) in Core Rock Samples A-1 and A-2 Respectively. the Use of Cobalt Ferrite Nanoparticles as a Nanofluid with Electromagnetic Waves Yielded a Higher Recovery of Residual Oil in Place (ROIP) which Is 31.58% as Compared to 8.70% when it Was Used as Nanofluid Alone. it Is Investigated that due to Absorption of Electromagnetic Waves by Cobalt Ferrite Nanoparticles the Oil Viscosity Reduces which Increase the Oil Recovery. it Can Be Concluded that the Synthesised Cobalt Ferrite (CoFe2O4) Nanoparticles Can Be Potentially Used for Enhanced Oil Recovery in Future.


1976 ◽  
Vol 32 ◽  
pp. 613-622
Author(s):  
I.A. Aslanov ◽  
Yu.S. Rustamov

SummaryMeasurements of the radial velocities and magnetic field strength of β CrB were carried out. It is shown that there is a variability with the rotation period different for various elements. The curve of the magnetic field variation measured from lines of 5 different elements: FeI, CrI, CrII, TiII, ScII and CaI has a complex shape specific for each element. This may be due to the presence of magnetic spots on the stellar surface. A comparison with the radial velocity curves suggests the presence of a least 4 spots of Ti and Cr coinciding with magnetic spots. A change of the magnetic field with optical depth is shown. The curve of the Heffvariation with the rotation period is given. A possibility of secular variations of the magnetic field is shown.


1998 ◽  
Vol 08 (PR2) ◽  
pp. Pr2-579-Pr2-582 ◽  
Author(s):  
S. Tumanski ◽  
M. Stabrowski

2014 ◽  
Vol 6 (2) ◽  
pp. 1178-1190
Author(s):  
A. JOHN PETER ◽  
Ada Vinolin

Simultaneous effects of magnetic field, pressure and temperature on the exciton binding energies are found in a 9.0 1.0 6.0 4.0 GaAs P / GaAs P quantum dot. Numerical calculations are carried out taking into consideration of spatial confinement effect. The cylindrical system is taken in the present problem with the strain effects. The electronic properties and the optical properties are found with the combined effects of magnetic field strength, hydrostatic pressure and temperature values. The exciton binding energies and the nonlinear optical properties are carried out taking into consideration of geometrical confinement and the external perturbations.Compact density approach is employed to obtain the nonlinear optical properties. The optical rectification coefficient is obtained with the photon energy in the presence of pressure, temperature and external magnetic field strength. Pressure and temperature dependence on nonlinear optical susceptibilities of generation of second and third order harmonics as a function of incident photon energy are brought out in the influence of magnetic field strength. The result shows that the electronic and nonlinear optical properties are significantly modified by the applications of external perturbations in a 9.0 1.0 6.0 4.0 GaAs P / GaAs P quantum dot.


1988 ◽  
Vol 12 (2) ◽  
pp. 89-96 ◽  
Author(s):  
R. Lufkin ◽  
M. Anselmo ◽  
J. Crues ◽  
W. Smoker ◽  
W. Hanafee

Sign in / Sign up

Export Citation Format

Share Document