scholarly journals Evaluation of Leaf N Concentration in Winter Wheat Based on Discrete Wavelet Transform Analysis

2019 ◽  
Vol 11 (11) ◽  
pp. 1331 ◽  
Author(s):  
Fenling Li ◽  
Li Wang ◽  
Jing Liu ◽  
Yuna Wang ◽  
Qingrui Chang

Leaf nitrogen concentration (LNC) is an important indicator for accurate diagnosis and quantitative evaluation of plant growth status. The objective was to apply a discrete wavelet transform (DWT) analysis in winter wheat for the estimation of LNC based on visible and near-infrared (400–1350 nm) canopy reflectance spectra. In this paper, in situ LNC data and ground-based hyperspectral canopy reflectance was measured over three years at different sites during the tillering, jointing, booting and filling stages of winter wheat. The DWT analysis was conducted on canopy original spectrum, log-transformed spectrum, first derivative spectrum and continuum removal spectrum, respectively, to obtain approximation coefficients, detail coefficients and energy values to characterize canopy spectra. The quantitative relationships between LNC and characteristic parameters were investigated and compared with models established by sensitive band reflectance and typical spectral indices. The results showed combining log-transformed spectrum and a sym8 wavelet function with partial least squares regression (PLS) based on the approximation coefficients at decomposition level 4 most accurately predicted LNC. This approach could explain 11% more variability in LNC than the best spectral index mSR705 alone, and was more stable in estimating LNC than models based on random forest regression (RF). The results indicated that narrowband reflectance spectroscopy (450–1350 nm) combined with DWT analysis and PLS regression was a promising method for rapid and nondestructive estimation of LNC for winter wheat across a range in growth stages.

2014 ◽  
Vol 513-517 ◽  
pp. 319-322
Author(s):  
Xiao Li Yang ◽  
Neng Bang Hou ◽  
Jun You Shi ◽  
Yan Fang Li

We studied moisture determination in lignitic coal samples through near-infrared (NIR) technique. This research was developed by applying partical least squares regression (PLS) and discrete wavelet transform (DWT). Firstly, the NIR spectra were pre-processed by DWT for fitting and compression. Then, the compressed data were used to build regression model with PLS for moisture determination in coal samples. Three type DWTs were investigated.Determination performance at different resolution scales was studied. The results show that DWT is a very efficient pre-processing method for NIR spectra analysis.


2013 ◽  
Vol 9 (1) ◽  
pp. 1-15
Author(s):  
Dunia Tahir

In this paper, image deblurring and denoising are presented. The used images were blurred either with Gaussian or motion blur and corrupted either by Gaussian noise or by salt & pepper noise. In our algorithm, the modified fixed-phase iterative algorithm (MFPIA) is used to reduce the blur. Then a discrete wavelet transform is used to divide the image into two parts. The first part represents the approximation coefficients. While the second part represents the detail coefficients, that a noise is removed by using the BayesShrink wavelet thresholding method.


2019 ◽  
Vol 64 (2) ◽  
pp. 211-220
Author(s):  
Sumanth Kumar Panguluri ◽  
Laavanya Mohan

Nowadays the result of infrared and visible image fusion has been utilized in significant applications like military, surveillance, remote sensing and medical imaging applications. Discrete wavelet transform based image fusion using unsharp masking is presented. DWT is used for decomposing input images (infrared, visible). Approximation and detailed coefficients are generated. For improving contrast unsharp masking has been applied on approximation coefficients. Then for merging approximation coefficients produced after unsharp masking average fusion rule is used. The rule that is used for merging detailed coefficients is max fusion rule. Finally, IDWT is used for generating a fused image. The result produced using the proposed fusion method is providing good contrast and also giving better performance results in reference to mean, entropy and standard deviation when compared with existing techniques.


2013 ◽  
Vol 791-793 ◽  
pp. 265-268
Author(s):  
Xiao Li Yang ◽  
Qiong He ◽  
Li Liu ◽  
Tong Yang

We investigated the optical path length to tea polyphenols (TP) determination in Puer tea by near infrared (NIR) spectroscopy. The NIR spectra samples include three path lengths (1mm, 2mm and 5mm). Firstly, spectra were pre-processed to eliminate useless information. Then, determination model was constructed by partial least squares regression. To study the influence of pre-processing on identification of optimal path for NIR analysis of tea polyphenols, we applied five techniques to pre-process spectra, including normalization, standardization, centralization, derivative and discrete wavelet transform. Comparison of the mean absolute percentage error (MAPE) of the models with different path lengths show that the models constructed with spectra collected in 2mm path length gave the best results. 1mm path length gained the uncorrected determination results. Normalization, centralization and derivative are better than standardization or discrete wavelet transform for pre-processing.


2014 ◽  
Vol 31 ◽  
pp. 13-27 ◽  
Author(s):  
Sajad Farokhi ◽  
Siti Mariyam Shamsuddin ◽  
U.U. Sheikh ◽  
Jan Flusser ◽  
Mohammad Khansari ◽  
...  

Author(s):  
YANKUI SUN ◽  
YONG CHEN ◽  
HAO FENG

Currently, two-dimensional dyadic wavelet transform (2D-DWT) is habitually considered as the one presented by Mallat, which is defined by an approximation component, two detail components in horizontal and vertical directions. This paper is to introduce a new type of two-dimensional dyadic wavelet transform and its application so that dyadic wavelet can be studied and used widely furthermore. (1) Two-dimensional stationary dyadic wavelet transform (2D-SDWT) is proposed, it is defined by approximation coefficients, detail coefficients in horizontal, vertical and diagonal directions, which is essentially the extension of two-dimensional stationary wavelet transform for orthogonal/biorthogonal wavelet filters. (2) ε-decimated dyadic discrete wavelet transform (DDWT) is introduced and its relation with 2D-SDWT is given, where ε is a sequence of 0's and 1's. (3) Mallat decomposition algorithm based on dyadic wavelet is introduced as a special case of ε-decimated DDWT, and so a face recognition algorithm based on dyadic wavelet is proposed, and experimental results are given to show its effectiveness.


2013 ◽  
Vol 834-836 ◽  
pp. 1006-1010 ◽  
Author(s):  
Xue Mei Wu ◽  
Po Yu Lou ◽  
Xiao Hui Yang

Interferogram is the original measured signal of the Fourier transform spectrometer. A new method addressed the problem of noise reduction in inter-ferogram domain is proposed for multivariate calibration of Fourier transform near infrared spectral signals. The method is based on the discrete wavelet transform (DWT). It is used to determination of the ethanol as noise reduction tool for partial least square (PLS) modeling. It is shown that the benefit of the proposed method lies not only in its performance to improve the quality of PLS model and the prediction precision, but also in its simplicity and practicability.


2014 ◽  
Vol 898 ◽  
pp. 831-834 ◽  
Author(s):  
Xiao Li Yang ◽  
Fan Wang

We studied volatile determination in lignite coal samples using near-infrared (NIR) spectra. Firstly, spectra were pre-processed to eliminate useless information. Then, determination model was constructed by partial least squares regression. To study the influence of pre-processing on determination of volatile for NIR analysis of lignite coal samples, we applied four techniques to pre-process spectra, including normalization, standardization, centralization, derivative and discrete wavelet transform. Comparison of the mean absolute percentage error (MAPE) and root mean square error of prediction (RMSEP) of the models show that the models constructed with spectra pre-processed by discrete wavelet transform gave the best results. Through parameters optimization, the results show that discrete wavelet transform and partial least squares regression can obtain satisfactory performance for moisture and volatile determination in coal samples.


Sign in / Sign up

Export Citation Format

Share Document