scholarly journals Regional Evaluation of Minor Tidal Constituents for Improved Estimation of Ocean Tides

2021 ◽  
Vol 13 (16) ◽  
pp. 3310
Author(s):  
Michael G. Hart-Davis ◽  
Denise Dettmering ◽  
Roman Sulzbach ◽  
Maik Thomas ◽  
Christian Schwatke ◽  
...  
Keyword(s):  
Sea Level ◽  
Satellite Altimetry ◽  
Tide Gauge ◽  
Sea Surface ◽  
Global Ocean ◽  
Ocean Tide ◽  
Ocean Tides ◽  
Tidal Constituents ◽  
Ocean Tide Models ◽  
Tidal Correction

Satellite altimetry observations have provided a significant contribution to the understanding of global sea surface processes, particularly allowing for advances in the accuracy of ocean tide estimations. Currently, almost three decades of satellite altimetry are available which can be used to improve the understanding of ocean tides by allowing for the estimation of an increased number of minor tidal constituents. As ocean tide models continue to improve, especially in the coastal region, these minor tides become increasingly important. Generally, admittance theory is used by most global ocean tide models to infer several minor tides from the major tides when creating the tidal correction for satellite altimetry. In this paper, regional studies are conducted to compare the use of admittance theory to direct estimations of minor tides from the EOT20 model to identify which minor tides should be directly estimated and which should be inferred. The results of these two approaches are compared to two global tide models (TiME and FES2014) and in situ tide gauge observations. The analysis showed that of the eight tidal constituents studied, half should be inferred (2N2, ϵ2, MSF and T2), while the remaining four tides (J1, L2, μ2 and ν2) should be directly estimated to optimise the ocean tidal correction. Furthermore, for certain minor tides, the other two tide models produced better results than the EOT model, suggesting that improvements can be made to the tidal correction made by EOT when incorporating tides from the two other tide models. Following on from this, a new approach of merging tidal constituents from different tide models to produce the ocean tidal correction for satellite altimetry that benefits from the strengths of the respective models is presented. This analysis showed that the tidal correction created based on the recommendations of the tide gauge analysis provided the highest reduction of sea-level variance. Additionally, the combination of the EOT20 model with the minor tides of the TiME and FES2014 model did not significantly increase the sea-level variance. As several additional minor tidal constituents are available from the TiME model, this opens the door for further investigations into including these minor tides and optimising the tidal correction for improved studies of the sea surface from satellite altimetry and in other applications, such as gravity field modelling.

Impact of sea level variations on hydrographic survey around Taiwan

2020 ◽  
Author(s):  
Wen-Hau Lan ◽  
Chung-Yen Kuo ◽  
Sheng-Fong Lin ◽  
Chien-Hsing Lu
Keyword(s):  
Sea Level ◽  
Tide Gauge ◽  
Temporal Changes ◽  
Altimeter Data ◽  
Ocean Tide ◽  
Ocean Tides ◽  
Sea Level Anomalies ◽  
Sea Level Variations ◽  
Ocean Tide Models ◽  
And Sea Level

<p>Taiwan is an island entirely surrounded by oceans, so living and economics are significantly influenced by the oceans. The electronic navigational chart system is extremely important for improving the safety of marine navigation and ocean depth is the essential data for electronic charts. Sea surface variations affected by ocean tide and sea level change are the main error sources in hydrographic surveys since the traditional tidal correction only using tide gauge stations, ignoring geographically non-uniform ocean tides and sea level anomalies around Taiwan. In this research, we evaluate two factors impacting the accuracy of hydrographic surveys, including ocean tides and seasonal sea level variations, using tide gauge records, satellite altimeter data and ocean tide models around Taiwan, and also analyze the accuracy of the ocean tide models around Taiwan. In addition, sea level anomalies are strongly influenced by climate changes in recent years. An understanding of seasonal sea level cycle and its spatial and temporal changes are importance because its temporal changes can result in the variation of the frequency and magnitude of coastal hazards. Therefore, we will apply the Ensemble Empirical Mode Decomposition to sea level data to assess the stability of the long-term seasonal sea level fluctuations with time.</p>

EOT20: A new global empirical ocean tide model derived from multi-mission satellite altimetry.

2021 ◽  
Author(s):  
Michael Hart-Davis ◽  
Denise Dettmering ◽  
Gaia Piccioni ◽  
Christian Schwatke ◽  
Marcello Passaro ◽  
...  
Keyword(s):  
Satellite Altimetry ◽  
Coastal Region ◽  
Global Ocean ◽  
Ocean Tide ◽  
Ocean Bottom ◽  
Ocean Tide Model ◽  
Mission Satellite ◽  
Coastal Sea ◽  
Tidal Constituents ◽  
Tidal Correction

<p>EOT20 is the latest in a series of empirical ocean tide (EOT) models derived using residual tidal analysis of multi-mission satellite altimetry at DGFI-TUM. The amplitudes and phases of seventeen tidal constituents are provided on a global 0.125-degree grid based on empirical analysis of eleven satellite altimetry missions. The EOT20 model shows significant improvements compared to the previous iteration of the global model (EOT11a) throughout the ocean, particularly in the coastal and shelf regions, due to the inclusion of more recent satellite altimetry data as well as more missions, the use of the updated FES2014 tidal model as a reference to estimated residual signals, the inclusion of the ALES retracker and improved coastal representation. In the validation of EOT20 using tide gauges and ocean bottom pressure data, these improvements in the model compared to EOT11a are highlighted with the root-square sum (RSS) of the eight major tidal constituents improving by ~3 cm for the entire global ocean with the major improvement in RSS (~3.5 cm) occurring in coastal regions (<1 km to the coast). Compared to the other global ocean tidal models, EOT20 shows a clear improvement of ~0.4 cm in RSS compared to the closest model (FES2014) in the global ocean. Compared to the FES2014 model, the RSS improvement in EOT20 is mainly seen in the coastal region (~0.45 cm) while in the shelf and open ocean regions these two models only vary in terms of RSS by ~0.005 cm. The significant improvement of EOT20, particularly in the coastal region, provides encouragement for the use of the EOT20 model as a tidal correction of satellite altimetry in coastal sea level research. </p>

scholarly journals EOT20: A global ocean tide model from multi-mission satellite altimetry

2021 ◽  
Author(s):  
Michael Geoffrey Hart-Davis ◽  
Gaia Piccioni ◽  
Denise Dettmering ◽  
Christian Schwatke ◽  
Marcello Passaro ◽  
...  
Keyword(s):  
Satellite Altimetry ◽  
Variance Reduction ◽  
Coastal Region ◽  
Global Ocean ◽  
Ocean Tide ◽  
Ocean Bottom ◽  
Ocean Tide Model ◽  
Mission Satellite ◽  
Tidal Constituents ◽  
Tidal Correction

Abstract. EOT20 is the latest in a series of empirical ocean tide (EOT) models derived using residual tidal analysis of multi-mission satellite altimetry at DGFI-TUM. The amplitudes and phases of seventeen tidal constituents are provided on a global 0.125-degree grid based on empirical analysis of seven satellite altimetry missions and four extended missions. The EOT20 model shows significant improvements compared to the previous iteration of the global model (EOT11a) throughout the ocean, particularly in the coastal and shelf regions, due to the inclusion of more recent satellite altimetry data as well as more missions, the use of the updated FES2014 tidal model as a reference to estimated residual signals, the inclusion of the ALES retracker and improved coastal representation. In the validation of EOT20 using tide gauges and ocean bottom pressure data, these improvements in the model compared to EOT11a are highlighted with the root-square sum (RSS) of the eight major tidal constituents improving by ~3 cm for the entire global ocean with the major improvement in RSS (~3.5 cm) occurring in the coastal region. Concerning the other global ocean tidal models, EOT20 shows an improvement of ~0.2 cm in RSS compared to the closest model (FES2014) in the global ocean. Variance reduction analysis was conducted comparing the results of EOT20 with FES2014 and EOT11a using the Jason-2, Jason-3 and SARAL satellite altimetry missions. From this analysis, EOT20 showed a variance reduction for all three satellite altimetry missions with the biggest improvement in variance occurring in the coastal region. These significant improvements, particularly in the coastal region, provides encouragement for the use of the EOT20 model as a tidal correction for satellite altimetry in sea-level research. All ocean and load tide data from the model can be freely accessed at https://doi.org/10.17882/79489 (Hart-Davis et al., 2021).

Validation of sea surface heights from satellite altimetry along the Indian coast

2021 ◽  
Author(s):  
Milaa Murshan ◽  
Balaji Devaraju ◽  
Nagarajan Balasubramanian ◽  
Onkar Dikshit
Keyword(s):  
Time Series ◽  
Sea Level ◽  
Satellite Altimetry ◽  
Tide Gauge ◽  
Atmospheric Correction ◽  
North Indian Ocean ◽  
Sea Surface ◽  
Indian Coast ◽  
Vertical Land Motion ◽  
And Performance

<p>Satellite altimetry provides measurements of sea surface height of centimeter-level accuracy over open oceans. However, its accuracy reduces when approaching the coastal areas and over land regions. Despite this downside, altimetric measurements are still applied successfully in these areas through altimeter retracking processes. This study aims to calibrate and validate retracted sea level data of Envisat, ERS-2, Topex/Poseidon, Jason-1, 2, SARAL/AltiKa, Cryosat-2 altimetric missions near the Indian coastline. We assessed the reliability, quality, and performance of these missions by comparing eight tide gauge (TG) stations along the Indian coast. These are Okha, Mumbai, Karwar, and Cochin stations in the Arabian Sea, and Nagapattinam, Chennai, Visakhapatnam, and Paradip in the Bay of Bengal. To compare the satellite altimetry and TG sea level time series, both datasets are transformed to the same reference datum. Before the calculation of the bias between the altimetry and TG sea level time series, TG data are corrected for Inverted Barometer (IB) and Dynamic Atmospheric Correction (DAC). Since there are no prior VLM measurements in our study area, VLM is calculated from TG records using the same procedure as in the Technical Report NOS organization CO-OPS 065. </p><p>Keywords— Tide gauge, Sea level, North Indian ocean, satellite altimetry, Vertical land motion</p>

scholarly journals Evaluation of global ocean tide models based on tidal gravity observations in China

2020 ◽  
Author(s):  
Hongbo Tan ◽  
Chongyong Shen ◽  
Guiju Wu
Keyword(s):  
High Precision ◽  
Earth Tide ◽  
Global Ocean ◽  
Ocean Tide ◽  
Ocean Tides ◽  
Ocean Tide Model ◽  
Tidal Forces ◽  
The Earth ◽  
Gravity Observation ◽  
Ocean Tide Models

<p>Solid Earth is affected by tidal cycles triggered by the gravity attraction of the celestial bodies. However, about 70% the Earth is covered with seawater which is also affected by the tidal forces. In the coastal areas, the ocean tide loading (OTL) can reach up to 10% of the earth tide, 90% for tilt, and 25% for strain (Farrell, 1972). Since 2007, a high-precision continuous gravity observation network in China has been established with 78 stations. The long-term high-precision tidal data of the network can be used to validate, verifying and even improve the ocean tide model (OTM).</p><p>In this paper, tidal parameters of each station were extracted using the harmonic analysis method after a careful editing of the data. 8 OTMs were used for calculating the OTL. The results show that the Root-Mean-Square of the tidal residuals (M<sub>0</sub>) vary between 0.078-1.77 μgal, and the average errors as function of the distance from the sea for near(0-60km), middle(60-1000km) and far(>1000km) stations are 0.76, 0.30 and 0.21 μgal. The total final gravity residuals (Tx) of the 8 major constituents (M<sub>2</sub>, S<sub>2</sub>, N<sub>2</sub>, K<sub>2</sub>, K<sub>1</sub>, O<sub>1</sub>, P<sub>1</sub>, Q<sub>1</sub>) for the best OTM has amplitude ranging from 0.14 to 3.45 μgal. The average efficiency for O<sub>1</sub> is 77.0%, while 73.1%, 59.6% and 62.6% for K<sub>1</sub>, M<sub>2</sub> and Tx. FES2014b provides the best corrections for O<sub>1</sub> at 12 stations, while SCHW provides the best for K<sub>1 </sub><sub>,</sub>M<sub>2</sub>and Tx at 12,8and 9 stations. For the 11 costal stations, there is not an obvious best OTM. The models of DTU10, EOT11a and TPXO8 look a litter better than FES2014b, HAMTIDE and SCHW. For the 17 middle distance stations, SCHW is the best OTM obviously. For the 7 far distance stations, FES2014b and SCHW model are the best models. But the correction efficiency is worse than the near and middle stations’.</p><p>The outcome is mixed: none of the recent OTMs performs the best for all tidal waves at all stations. Surprisingly, the Schwiderski’s model although is 40 years old with a coarse resolution of 1° x 1° is performing relative well with respect to the more recent OTM. Similar results are obtained in Southeast Asia (Francis and van Dam, 2014). It could be due to systematic errors in the surroundings seas affecting all the ocean tides models. It's difficult to detect, but invert the gravity attraction and loading effect to map the ocean tides in the vicinity of China would be one way.</p>

scholarly journals A COMPARISON BETWEEN TIDAL CONSTITUENTS DERIVED FROM SATELLITE ALTIMETRY AND IN-SITU DATA AROUND PENINSULAR MALAYSIA

2021 ◽  
Vol 6 (24) ◽  
pp. 139-151
Author(s):  
Mohammad Hanif Hamden ◽  
Ami Hassan Md Din ◽  
Dudy Darmawan Wijaya
Keyword(s):  
Satellite Altimetry ◽  
Tide Gauge ◽  
Peninsular Malaysia ◽  
Ocean Tide ◽  
Tide Gauges ◽  
In Situ Data ◽  
Regional Area ◽  
Tidal Constituents ◽  
Hourly Observation

Satellite altimetry technology has been widely used in exploring Earth’s Ocean activities. Achieving a remarkable accuracy in measuring sea level for ocean tide analysis has led the local researchers to investigate more details on tidal behaviour in the regional area. This study is an attempt to assess the reliability of derived tidal constituents between satellite radar altimetry and in-situ data which is referred to as coastal tide gauges. Three satellite missions denoted as TOPEX class missions namely TOPEX, Jason-1, and Jason-2 were used to derive along-track sea surface height (SSH) time series over 23 years. Besides, four selected coastal tide gauges were used for tidal analysis and validation where the tidal data have at least 19 years of hourly observation. Derivation of tidal constituents from both satellite altimetry and tide gauges were executed by adopting the harmonic analysis method. The comparisons were made by calculating the Root Mean Square Misfit (RMSmisfit) of each tidal constituent between the nearest altimetry point to the tide gauges. After RMSmisfit, Root Sum Square (RSS) values of tidal constituents at each tide gauge were also calculated. The results displayed the RMSmisfit of tidal constituents agreed well with the selected tide gauges which are within 10 cm except for M2 constituents which recorded 10.2 cm. Pelabuhan Kelang tide gauge station showed the highest RSS value followed by Pulau Langkawi which recorded 21.2 cm and 9.8 cm, respectively. In conclusion, overall results can be inferred that the satellite-derived tidal constituents are likely to have good agreement with the selected tide gauge stations. Nevertheless, further analysis should be executed in determining high precision satellite-derived tidal constituents, especially in the complex regional area.

scholarly journals Reduction of the 59-day error signal in the Mean Sea Level derived from TOPEX/Poseidon, Jason-1 and Jason-2 data with the latest FES and GOT ocean tide models

2016 ◽  
Author(s):  
Lionel Zawadzki ◽  
Michaël Ablain ◽  
Loren Carrere ◽  
Richard D. Ray ◽  
Nikita P. Zelensky ◽  
...  
Keyword(s):  
Sea Level ◽  
Ocean Circulation ◽  
Global Ocean ◽  
Ocean Tide ◽  
Frequency Error ◽  
Mean Sea Level ◽  
Global Ocean Circulation ◽  
Ocean Tide Models ◽  
Annual Signal ◽  
Societal Interest

Abstract. Mean sea level (MSL) is a prominent indicator of climatic change (Ablain et al., 2015; Cazenave et al., 2014; Leuliette and Willis, 2011), and is therefore of great scientific and societal interest. Since the beginning of the altimeter mission TOPEX/Poseidon, followed by Jason-1 and Jason-2 on similar orbits, and many other missions on different orbits (ERS, EnviSat, etc.), MSL products became essential to the comprehension of Global ocean circulation. Since early in the TOPEX/Poseidon mission (Nerem, 1995) a suspicious signal, having period near 59 days and amplitude of roughly 5 mm, was apparent in the GMSL record. Compared with the 4–5 mm amplitude of the annual signal (Minster et al., 1999), the suspicious 59-day signal has understandably attracted attention. Moreover, the same signal has been subsequently detected in Jason-1 and later Jason-2 MSLs. In 2010, it was the subject of a dedicated session at the Ocean Surface Topography Science Team (OSTST) meeting in Lisbon. The conclusions were this signal is the aliasing of a higher frequency error inherited from the tide model correction: the semi-diurnal wave S2. The source of this error was mainly attributed to TOPEX measurements which are assimilated in ocean tide models. When these models are used in the computation of TOPEX/Poseidon MSL, most of the error cancels. However, this error is communicated to Jason-1 and Jason-2 MSLs. Since 2010, considerable efforts have been undertaken within the ocean tide community in order to correct ocean tide S2-waves from this error, particularly in the Goddard Ocean Tide (GOT) and Finite Element Solution (FES) latest versions. The present paper aims at assessing, quantifying and characterizing the reduction of the 58.77-day error thanks to the latest releases.

Sign in / Sign up

Export Citation Format

Share Document