scholarly journals Monitoring Coastline Changes of the Malay Islands Based on Google Earth Engine and Dense Time-Series Remote Sensing Images

2021 ◽  
Vol 13 (19) ◽  
pp. 3842
Author(s):  
Yaxin Ding ◽  
Xiaomei Yang ◽  
Hailiang Jin ◽  
Zhihua Wang ◽  
Yueming Liu ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Time Series ◽  
Large Scale ◽  
Dynamic Change ◽  
Google Earth ◽  
Tidal Range ◽  
Remote Sensing Images ◽  
Data Platform ◽  
Range Observation ◽  
Change Monitoring

The use of remote sensing to monitor coastlines with wide distributions and dynamic changes is significant for coastal environmental monitoring and resource management. However, most current remote sensing information extraction of coastlines is based on the instantaneous waterline, which is obtained by single-period imagery. The lack of a unified standard is not conducive to the dynamic change monitoring of a changeable coastline. The tidal range observation correction method can be used to correct coastline observation to a unified climax line, but it is difficult to apply on a large scale because of the distribution of observation sites. Therefore, we proposed a coastline extraction method based on the remote sensing big data platform Google Earth Engine and dense time-series remote sensing images. Through the instantaneous coastline probability calculation system, the coastline information could be extracted without the tidal range observation data to achieve a unified tide level standard. We took the Malay Islands as the experimental area and analyzed the consistency between the extraction results and the existing high-precision coastline thematic products of the same period to achieve authenticity verification. Our results showed that the coastline data deviated 10 m in proportion to a reach of 40% and deviated 50 m within a reach of 89%. The overall accuracy was kept within 100 m. In addition, we extracted 96 additional islands that have not been included in public data. The obtained multi-phase coastlines showed the spatial distribution of the changing hot regions of the Malay Islands’ coastline, which greatly supported our analysis of the reasons for the expansion and retreat of the coastline in this region. These research results showed that the big data platform and intensive time-series method have considerable potential in large-scale monitoring of coastline dynamic change and island reef change monitoring.

scholarly journals The NDVI algorithm utilization on the google earth engine platform to monitor changes in forest density in mining area

2021 ◽  
Vol 886 (1) ◽  
pp. 012100
Author(s):  
Munajat Nursaputra ◽  
Siti Halimah Larekeng ◽  
Nasri ◽  
Andi Siady Hamzah
Keyword(s):  
Remote Sensing ◽  
Time Series ◽  
Large Scale ◽  
Vegetation Index ◽  
Forest Degradation ◽  
Google Earth ◽  
Aerial Images ◽  
Forest Monitoring ◽  
Forest Density ◽  
Google Earth Engine

Abstract Periodic forest monitoring needs to be done to avoid forest degradation. In general, forest monitoring can be conducted manually (field surveys) or using technological innovations such as remote sensing data derived from aerial images (drone results) or cloud computing-based image processing. Currently, remote sensing technology provides large-scale forest monitoring using multispectral sensors and various vegetation index processing algorithms. This study aimed to evaluate the use of the Google Earth Engine (GEE) platform, a geospatial dataset platform, in the Vale Indonesia mining concession area to improve accountable forest monitoring. This platform integrates a set of programming methods with a publicly accessible time-series database of satellite imaging services. The method used is NDVI processing on Landsat multispectral images in time series format, which allows for the description of changes in forest density levels over time. The results of this NDVI study conducted on the GEE platform have the potential to be used as a tool and additional supporting data for monitoring forest conditions and improvement in mining regions.

scholarly journals A large-scale change monitoring of wetlands using time series Landsat imagery on Google Earth Engine: a case study in Newfoundland

2020 ◽  
Vol 57 (8) ◽  
pp. 1102-1124
Author(s):  
M. Mahdianpari ◽  
H. Jafarzadeh ◽  
J. E. Granger ◽  
F. Mohammadimanesh ◽  
B. Brisco ◽  
...  
Keyword(s):  
Time Series ◽  
Large Scale ◽  
Landsat Imagery ◽  
Google Earth ◽  
Scale Change ◽  
Large Scale Change ◽  
Google Earth Engine ◽  
Change Monitoring

scholarly journals Large-Scale Crop Mapping Based on Machine Learning and Parallel Computation with Grids

2019 ◽  
Vol 11 (12) ◽  
pp. 1500 ◽  
Author(s):  
Ning Yang ◽  
Diyou Liu ◽  
Quanlong Feng ◽  
Quan Xiong ◽  
Lin Zhang ◽  
...  
Keyword(s):  
Machine Learning ◽  
Remote Sensing ◽  
Time Series ◽  
Parallel Computing ◽  
Random Forest ◽  
Large Scale ◽  
Remote Sensing Data ◽  
Remote Sensing Images ◽  
Medium Resolution ◽  
Crop Mapping

Large-scale crop mapping provides important information in agricultural applications. However, it is a challenging task due to the inconsistent availability of remote sensing data caused by the irregular time series and limited coverage of the images, together with the low spatial resolution of the classification results. In this study, we proposed a new efficient method based on grids to address the inconsistent availability of the high-medium resolution images for large-scale crop classification. First, we proposed a method to block the remote sensing data into grids to solve the problem of temporal inconsistency. Then, a parallel computing technique was introduced to improve the calculation efficiency on the grid scale. Experiments were designed to evaluate the applicability of this method for different high-medium spatial resolution remote sensing images and different machine learning algorithms and to compare the results with the widely used nonparallel method. The computational experiments showed that the proposed method was successful at identifying large-scale crop distribution using common high-medium resolution remote sensing images (GF-1 WFV images and Sentinel-2) and common machine learning classifiers (the random forest algorithm and support vector machine). Finally, we mapped the croplands in Heilongjiang Province in 2015, 2016, 2017, which used a random forest classifier with the time series GF-1 WFV images spectral features, the enhanced vegetation index (EVI) and normalized difference water index (NDWI). Ultimately, the accuracy was assessed using a confusion matrix. The results showed that the classification accuracy reached 88%, 82%, and 85% in 2015, 2016, and 2017, respectively. In addition, with the help of parallel computing, the calculation speed was significantly improved by at least seven-fold. This indicates that using the grid framework to block the data for classification is feasible for crop mapping in large areas and has great application potential in the future.

MILL: Channel Attention–based Deep Multiple Instance Learning for Landslide Recognition

2021 ◽  
Vol 17 (2s) ◽  
pp. 1-11
Author(s):  
Xiaochuan Tang ◽  
Mingzhe Liu ◽  
Hao Zhong ◽  
Yuanzhen Ju ◽  
Weile Li ◽  
...  
Keyword(s):  
Neural Network ◽  
Remote Sensing ◽  
Large Scale ◽  
Remote Sensing Image ◽  
Disaster Risk ◽  
Multiple Instance Learning ◽  
Remote Sensing Images ◽  
Loess Area ◽  
Remote Sensing Image Classification ◽  
Natural Disaster Risk

Landslide recognition is widely used in natural disaster risk management. Traditional landslide recognition is mainly conducted by geologists, which is accurate but inefficient. This article introduces multiple instance learning (MIL) to perform automatic landslide recognition. An end-to-end deep convolutional neural network is proposed, referred to as Multiple Instance Learning–based Landslide classification (MILL). First, MILL uses a large-scale remote sensing image classification dataset to build pre-train networks for landslide feature extraction. Second, MILL extracts instances and assign instance labels without pixel-level annotations. Third, MILL uses a new channel attention–based MIL pooling function to map instance-level labels to bag-level label. We apply MIL to detect landslides in a loess area. Experimental results demonstrate that MILL is effective in identifying landslides in remote sensing images.

scholarly journals Subsidence Monitoring of Fill Area in Yan’an New District Based on Sentinel-1A Time Series Imagery

2021 ◽  
Vol 13 (15) ◽  
pp. 3044
Author(s):  
Mingjie Liao ◽  
Rui Zhang ◽  
Jichao Lv ◽  
Bin Yu ◽  
Jiatai Pang ◽  
...  
Keyword(s):  
Time Series ◽  
Large Scale ◽  
Ground Deformation ◽  
Dynamic Change ◽  
Deformation Monitoring ◽  
Chinese Loess Plateau ◽  
Ground Subsidence ◽  
Shanxi Province ◽  
Environment Change ◽  
Loess Area

In recent years, many cities in the Chinese loess plateau (especially in Shanxi province) have encountered ground subsidence problems due to the construction of underground projects and the exploitation of underground resources. With the completion of the world’s largest geotechnical project, called “mountain excavation and city construction,” in a collapsible loess area, the Yan’an city also appeared to have uneven ground subsidence. To obtain the spatial distribution characteristics and the time-series evolution trend of the subsidence, we selected Yan’an New District (YAND) as the specific study area and presented an improved time-series InSAR (TS-InSAR) method for experimental research. Based on 89 Sentinel-1A images collected between December 2017 to December 2020, we conducted comprehensive research and analysis on the spatial and temporal evolution of surface subsidence in YAND. The monitoring results showed that the YAND is relatively stable in general, with deformation rates mainly in the range of −10 to 10 mm/yr. However, three significant subsidence funnels existed in the fill area, with a maximum subsidence rate of 100 mm/yr. From 2017 to 2020, the subsidence funnels enlarged, and their subsidence rates accelerated. Further analysis proved that the main factors induced the severe ground subsidence in the study area, including the compressibility and collapsibility of loess, rapid urban construction, geological environment change, traffic circulation load, and dynamic change of groundwater. The experimental results indicated that the improved TS-InSAR method is adaptive to monitoring uneven subsidence of deep loess area. Moreover, related data and information would provide reference to the large-scale ground deformation monitoring and in similar loess areas.

scholarly journals Estimating Forest Canopy Cover by Multiscale Remote Sensing in Northeast Jiangxi, China

Land ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 433
Author(s):  
Xiaolan Huang ◽  
Weicheng Wu ◽  
Tingting Shen ◽  
Lifeng Xie ◽  
Yaozu Qin ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Large Scale ◽  
Forest Canopy ◽  
Canopy Cover ◽  
Google Earth ◽  
Tree Canopy ◽  
Landsat Data ◽  
High Resolution Data ◽  
Modis Ndvi ◽  
Tree Canopy Cover

This research was focused on estimation of tree canopy cover (CC) by multiscale remote sensing in south China. The key aim is to establish the relationship between CC and woody NDVI (NDVIW) or to build a CC-NDVIW model taking northeast Jiangxi as an example. Based on field CC measurements, this research used Google Earth as a complementary source to measure CC. In total, 63 sample plots of CC were created, among which 45 were applied for modeling and the remaining 18 were employed for verification. In order to ascertain the ratio R of NDVIW to the satellite observed NDVI, a 20-year time-series MODIS NDVI dataset was utilized for decomposition to obtain the NDVIW component, and then the ratio R was calculated with the equation R = (NDVIW/NDVI) *100%, respectively, for forest (CC >60%), medium woodland (CC = 25–60%) and sparse woodland (CC 1–25%). Landsat TM and OLI images that had been orthorectified by the provider USGS were atmospherically corrected using the COST model and used to derive NDVIL. R was multiplied for the NDVIL image to extract the woody NDVI (NDVIWL) from Landsat data for each of these plots. The 45 plots of CC data were linearly fitted to the NDVIWL, and a model with CC = 103.843 NDVIW + 6.157 (R2 = 0.881) was obtained. This equation was applied to predict CC at the 18 verification plots and a good agreement was found (R2 = 0.897). This validated CC-NDVIW model was further applied to the woody NDVI of forest, medium woodland and sparse woodland derived from Landsat data for regional CC estimation. An independent group of 24 measured plots was utilized for validation of the results, and an accuracy of 83.0% was obtained. Thence, the developed model has high predictivity and is suitable for large-scale estimation of CC using high-resolution data.

scholarly journals A Public Dataset for Fine-Grained Ship Classification in Optical Remote Sensing Images

2021 ◽  
Vol 13 (4) ◽  
pp. 747
Author(s):  
Yanghua Di ◽  
Zhiguo Jiang ◽  
Haopeng Zhang
Keyword(s):  
Remote Sensing ◽  
Image Data ◽  
Remote Sensing Image ◽  
Google Earth ◽  
Optical Remote Sensing ◽  
Remote Sensing Images ◽  
Visual Categorization ◽  
Class Differences ◽  
Fine Grained ◽  
Ship Classification

Fine-grained visual categorization (FGVC) is an important and challenging problem due to large intra-class differences and small inter-class differences caused by deformation, illumination, angles, etc. Although major advances have been achieved in natural images in the past few years due to the release of popular datasets such as the CUB-200-2011, Stanford Cars and Aircraft datasets, fine-grained ship classification in remote sensing images has been rarely studied because of relative scarcity of publicly available datasets. In this paper, we investigate a large amount of remote sensing image data of sea ships and determine most common 42 categories for fine-grained visual categorization. Based our previous DSCR dataset, a dataset for ship classification in remote sensing images, we collect more remote sensing images containing warships and civilian ships of various scales from Google Earth and other popular remote sensing image datasets including DOTA, HRSC2016, NWPU VHR-10, We call our dataset FGSCR-42, meaning a dataset for Fine-Grained Ship Classification in Remote sensing images with 42 categories. The whole dataset of FGSCR-42 contains 9320 images of most common types of ships. We evaluate popular object classification algorithms and fine-grained visual categorization algorithms to build a benchmark. Our FGSCR-42 dataset is publicly available at our webpages.

Sign in / Sign up

Export Citation Format

Share Document