scholarly journals Assessing the Impact of DMAs and the Use of Boosters on Chlorination in a Water Distribution Network in Greece

Water ◽  
2021 ◽  
Vol 13 (16) ◽  
pp. 2141
Author(s):  
Stavroula Tsitsifli ◽  
Vasilis Kanakoudis
Keyword(s):  
Water Distribution ◽  
Distribution Network ◽  
Water Distribution Network ◽  
Assessment Process ◽  
Water Volume ◽  
Pressure Management ◽  
Water Age ◽  
Chlorination Process ◽  
Management Measures ◽  
The Impact

Disinfection is one of the most important water treatment processes as it inactivates pathogens providing safe drinking water to the consumers. A fresh-water distribution network is a complex system where constant monitoring of several parameters and related managerial decisions take place in order for the network to operate in the most efficient way. However, there are cases where some of the decisions made to improve the network’s performance level, such as reduction of water losses, may have negative impacts on other significant operational processes such as the disinfection. In particular, the division of a water distribution network into district metered areas (DMAs) and the application of various pressure management measures may impact the effectiveness of the water chlorination process. Two operational measures are assessed in this paper: (a) the use of inline chlorination boosters to achieve more efficient chlorination; and (b) how the DMAs formation impacts the chlorination process. To achieve this, the water distribution network of a Greek town is chosen as a case study where several scenarios are being thoroughly analyzed. The assessment process utilizes the network’s hydraulic simulation model, which is set up in Watergems V8i software, forming the baseline to develop the network’s water quality model. The results proved that inline chlorination boosters ensure a more efficient disinfection, especially at the most remote parts/nodes of the network, compared to conventional chlorination processes (e.g., at the water tanks), achieving 100% safe water volume and consuming almost 50% less chlorine mass. DMAs’ formation results in increased water age values up to 8.27%, especially at the remote parts/nodes of the network and require more time to achieve the necessary minimum effective chlorine concentration of 0.2 mg/L. However, DMAs formation and pressure management measures do not threaten the chlorination’s efficiency. It is important to include water age and residual chlorine as criteria when optimizing water pressure and the division of DMAs.

scholarly journals The Impact of Pressure Management Techniques on the Water Age in an Urban Pipe Network—The Case of Kos City Network

Proceedings ◽  
2018 ◽  
Vol 2 (11) ◽  
pp. 699 ◽  
Author(s):  
Anastasia Kravvari ◽  
Vasilis Kanakoudis ◽  
Menelaos Patelis
Keyword(s):  
Distribution Systems ◽  
Water Distribution ◽  
Distribution Network ◽  
Water Distribution Network ◽  
Optimization Criterion ◽  
Maximum Pressure ◽  
Pressure Management ◽  
Water Age ◽  
City Water ◽  
The Impact

The goal of this article is to study the impact that pressure management in distribution systems has, on the quality of the supplied water in terms of its water age, using the water distribution network of Kos city, capital of Kos Island in Greece was used as the case study network. This was achieved through network simulation using the Watercad V8i software, followed by the division of the network in district metered areas (DMA) and the placement of pressure reducing valves (PRV) in the entering nodes of each DMA. Research aimed also to optimize DMAs’ borders using the water age as the optimization criterion, instead of maximum pressure reduction. Different scenarios were tested on the calibrated and validated hydraulic model of Kos city water distribution network.

scholarly journals ANALISIS KUALITAS AIR UNTUK KONSENTRASI FLUORIDE PADA SISTEM JARINGAN DISTRIBUSI AIR MINUM DENGAN FLUORIDASI

2019 ◽  
Vol 2 (1) ◽  
pp. 11 ◽  
Author(s):  
Arif Susanto ◽  
Purwanto Purwanto ◽  
Agus Hadiyarto
Keyword(s):  
Water Quality ◽  
Drinking Water ◽  
Water Distribution ◽  
Dental Health ◽  
Distribution Network ◽  
Fluoride Concentration ◽  
Water Distribution Network ◽  
Water Supply Systems ◽  
Water Age ◽  
Drinking Water Distribution

Abstract:. The requirement of consumed drinking water so that it does not create disturbance to public health is that it needs a quality monitoring. Water fluoridation in Tembagapura City aims to reach its concentration level toward certain safe level, and it can provide maximum benefits for dental health. Analysis and simulation methods using EPAnet software. The results of hydrolic simulation and water quality for fluoride concentration of each node and link in the drinking water distribution network system have changed in every time change following the drinking water distribution segment. From hydraulic simulations, especially for head and flow at separate points, it consists of simultaneous solution in flow equivalence for every junction and headloss relationship in every link of network as a result of hydraulic balancing. New segment will be made at the end of each link that receives inflow from a node if the quality of the new node is different from the link in the last segment. Every pipe in network contains singular segment where the water quality is in line with the preliminary quality stated in the preliminary node. With the availability of hydraulic model and water quality for fluoride concentration, a further research can be conducted for chlorine decay, growth of by product i.e. Trihalomethans (THMs) as well as water age simultaneously in drinking water supply systems in Tembagapura City.  Keyword: EPAnet, distribution network, fluoride concentration. Abstrak: Persyaratan kualitas air minum yang dikonsumsi masyarakat agar tidak menimbulkan gangguan kesehatan, maka penyelenggara air minum perlu melakukan pemantauan kualitasnya. Fluoridasi air di Kota Tembagapura ditujukan untuk mencapai tingkat konsentrasi fluoride pada level tertentu yang aman dan dapat memberikan manfaat maksimal bagi kesehatan gigi. Metode analisis dan simulasi menggunakan perangkat lunak EPAnet. Hasil simulasi hidrolis dan kualitas air untuk konsentrasi fluoride pada setiap node dan link pada sistem jaringan distribusi air minum berubah pada setiap perubahan waktu mengikuti segmen distribusi air minum tersebut. Dari simulasi hidrolis, khusus untuk head dan aliran pada titik yang terpisah meliputi penyelesaian secara simultan dalam persamaan aliran untuk tiap sambungan (junction), dan hubungan headloss pada setiap link pada jaringan sebagai akibat dari hydrolic balancing. Segmen baru terbentuk pada akhir dari setiap link yang menerima inflow dari sebuah node, jika kualitas node baru berbeda dari link pada segmen terakhir. Setiap pipa dalam jaringan mengandung segmen tunggal, di mana kualitas air sebanding dengan kualitas awal yang ditetapkan di node awal. Dengan tersedianya model hidrolis dan kualitas air untuk konsentrasi fluoride, maka dapat dilakukan penelitian lanjutan untuk peluruhan klorin, pertumbuhan by product yaitu trihalomethans (THMs) serta usia air secara simultan pada sistem penyediaan air minum di Kota Tembagapura.Kata Kunci: EPAnet, jaringan distribusi, konsentrasi fluoride.

scholarly journals Optimizing the Formation of DMAs in a Water Distribution Network through Advanced Modelling

Water ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 278 ◽  
Author(s):  
Stavroula Chatzivasili ◽  
Katerina Papadimitriou ◽  
Vasilis Kanakoudis
Keyword(s):  
Mixture Model ◽  
Water Distribution ◽  
Water Pressure ◽  
Distribution Network ◽  
Water Distribution Network ◽  
Gaussian Mixture ◽  
Optimal Placement ◽  
Water Age ◽  
Optimal Separation ◽  
Student’S T

Water pressure management in a water distribution network (WDN) is a key component applied to achieve desirable water quality as well as a trouble-free operation of the network. This paper presents a hybrid, two-stage approach, to provide optimal separation of a WDN into District Metered Areas (DMAs), improving both water age and pressure. The first stage aims to divide the WDN into smaller areas via the Geometric Partitioning method, which is based on Recursive Coordinate Bisection (RCB). Subsequently, the Student’s t-mixture model (SMM) is applied to each area, providing an optimal placement of isolation valves and separating the network in DMAs. The model is evaluated on a realistic network generated through Watergems and is compared against one variation of it implemented, including the Gaussian Mixture Model (GMM) as well as the Genetic Algorithm (GA) approach, obtaining impressive performance. The implementation of both stages was deployed in a MATLAB environment through the Epanet toolkit. The proposed system is very promising, especially for large size WDNs due to the decreased running time and noteworthy reduction of pressure and water age.

scholarly journals Improved Hydraulic Simulation of Valve Layout Effects on Post-Earthquake Restoration of a Water Distribution Network

2020 ◽  
Vol 12 (8) ◽  
pp. 3492
Author(s):  
Jeongwook Choi ◽  
Doosun Kang
Keyword(s):  
Water Distribution ◽  
Distribution Network ◽  
Water Distribution Network ◽  
Seismic Damage ◽  
Hydraulic Analysis ◽  
Hydraulic Simulation ◽  
Restoration Process ◽  
Restoration Strategies ◽  
The Impact ◽  
Pressure Driven Analysis

To restore water pipes damaged by earthquakes, it is common to block the water flow by closing the associated shut-off valves. In this process, water supply suspension in the area connected to the isolated pipes is inevitable, which decreases the serviceability of the water distribution network (WDN). In this study, we identified the impact of valve layout (i.e., number and location) on system serviceability during a seismic damage restoration process. By conducting a pressure-driven-analysis (PDA) using EPANET 3.0, a more realistic hydraulic analysis could be carried out under the seismically damaged condition. Furthermore, by considering the valve-controlled segment in the hydraulic simulation, a more realistic water suspension area was determined, and efficient seismic damage restoration strategies were identified. The developed model was implemented on a WDN to demonstrate the effect of valve layout on the post-earthquake restoration process. Finally, effective restoration strategies were suggested for the application network.

scholarly journals Pressure Regulation vs. Water Aging in Water Distribution Networks

Water ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 1323 ◽  
Author(s):  
Menelaos Patelis ◽  
Vasilis Kanakoudis ◽  
Anastasia Kravvari
Keyword(s):  
Water Distribution ◽  
Water Distribution Network ◽  
Distribution Networks ◽  
High Water ◽  
Pressure Regulation ◽  
Water Age ◽  
Hydraulic Simulation ◽  
Annual Water ◽  
Winter Time ◽  
The Impact

In this paper, the effects of pressure regulation in a water distribution network (WDN) are being examined. Quality is hammered the most when pressure is reduced in a WDN and this occurs due to the increase in the age of water flowing inside the network pipes (water age is actually the total time the water remains inside the pipes before reaching the customer’s tap). Kos town WDN is used as the case study network. Kos town is the capital of the homonymous Greek island, among the most famous and popular of the Greek islands. The specific WDN is quite typical but very interesting, as it is extended along the seafront. The network’s hydraulic simulation model was developed through the WaterCad V8i software. As Kos experiences too high-water demand peaks and lows during summer and winter time, respectively, its WDN has already been thoroughly studied, in order to regulate the pressure and reduce its annual water loss rates. Nevertheless, these scenarios have never been examined regarding the impact on water quality. In the current study, the division of the WDN in District Metered Areas (DMAs) and the use of a Pressure Reducing Valve (PRV) in the entering node of each DMA are being evaluated in terms of water age. Additionally, a swift optimization process takes place to produce different DMAs’ borders, based on the criteria of minimum nodal water age, instead of optimal pressure. Different scenarios were tested on the calibrated and validated hydraulic model of Kos town WDN.

scholarly journals Water quality comprehensive evaluation method for large water distribution network based on clustering analysis

2011 ◽  
Vol 13 (3) ◽  
pp. 390-400 ◽  
Author(s):  
Kui Chang ◽  
Jin Liang Gao ◽  
Wen Yan Wu ◽  
Yi Xing Yuan
Keyword(s):  
Water Quality ◽  
Quality Indicators ◽  
Water Distribution ◽  
Comprehensive Evaluation ◽  
Distribution Network ◽  
Water Distribution Network ◽  
Residual Chlorine ◽  
Clustering Methods ◽  
Water Age ◽  
Water Quality Indicators

In order to evaluate water quality for a large water distribution network comprehensively, a two-stage classification method was used and the clustering methods, self-organizing map (SOM), K-means method and fuzzy c-mean (FCM), were represented. With these clustering methods, the pipes of a large real water distribution network were divided into some groups considering one or more water quality indicators synchronously. The water quality indicators of residual chlorine, water age, THMs, TAAs, TOC and BDOC are used in this paper. Residual chlorine and water age are two main water quality indicators. THMs and TAAs can represents the disinfection byproducts information. And TOC and BDOC are used to represents biological stability. According to the clustering results, the status of water quality of the water network was analysed. The results showed that the classification of SOM could express the comprehensive water quality in a water distribution network (WDN) directly and vividly by high-dimension water quality indicator projection to a low dimensional topology grid and that two-stage classification method has higher efficiency in comparison to the traditional clustering method. Water quality comprehensive evaluation was of significance for locating water quality monitoring, water network rehabilitation and expansion.

Sign in / Sign up

Export Citation Format

Share Document