scholarly journals Preparation and Characterization of Few Layered MoS2 Nano Flakes

2019 ◽  
Vol 8 (2S3) ◽  
pp. 146-148
Keyword(s):  
Layered Materials ◽  
Transition Metal Dichalcogenide ◽  
Two Dimensional ◽  
Thermal And Mechanical Properties ◽  
X Ray Diffraction ◽  
Molybdenum Disulphide ◽  
X Ray ◽  
Potential Applications ◽  
Layered Mos2

Two dimensional layered materials have become a prominent area of current research and development due to the significant properties exhibited by them. Exploiting graphene's layered structure have led to the property enhancement and thereby making it a good candidate for potential applications. MoS2 (Molybdenum disulphide), a transition metal dichalcogenide possess exceptional electrical, thermal and mechanical properties which can be well exploited on exfoliation. The present work report the exfoliation of pristine MoS2. The layers of pristine MoS2 are held together by weak van der Waals interaction, which is disturbed by the addition of a suitable modifier facilitating the exfoliation process. The modifier treated MoS2 is elucidated by powder X-ray diffraction, Photoluminesence and Raman spectroscopy

One Step Synthesis and Characterization of Zirconia-Graphene Composites

2012 ◽  
Vol 600 ◽  
pp. 174-177 ◽  
Author(s):  
Jian Fei Xia ◽  
Zong Hua Wang ◽  
Yan Zhi Xia ◽  
Fei Fei Zhang ◽  
Fu Qiang Zhu ◽  
...  
Keyword(s):  
Synthesis And Characterization ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Graphene Composite ◽  
Transmission Electron ◽  
One Step ◽  
Ft Ir ◽  
Xrd Techniques

Zirconia-graphene composite (ZrO2-G) has been successfully synthesized via decomposition of ZrOCl2•6H2O in a water-isopropanol system with dispersed graphene oxide (GO) utilizing Na2S as a precursor could enable the occurrence of the deposition of Zr4+ and the deoxygenation of GO at the same time. Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) techniques were used to characterize the samples. It was found that graphene were fully coated with ZrO2, and the ZrO2 existing in tetragonal phase, which resulted in the formation of two-dimensional composite.

Hydrothermal synthesis, crystal structure and properties of a two-dimensional uranyl coordination polymer based on a flexible zwitterionic ligand

2018 ◽  
Vol 74 (3) ◽  
pp. 366-371 ◽  
Author(s):  
Wen Cui ◽  
Ruyu Wang ◽  
Xi Shu ◽  
Yu Fan ◽  
Yang Liu ◽  
...  
Keyword(s):  
Coordination Polymer ◽  
Hydrothermal Reaction ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
Uranyl Compounds ◽  
X Ray ◽  
Potential Applications ◽  
Ft Ir ◽  
Fuel Reprocessing ◽  
Ft Ir Spectroscopy

The interaction between the uranyl cation, (UO2)2+, and organic species is of interest due to the potential applications of the resulting compounds with regard to nuclear waste disposal and nuclear fuel reprocessing. The hydrothermal reaction of various uranyl compounds with flexible zwitterionic 1,1′-[1,4-phenylenebis(methylene)]bis(pyridin-1-ium-4-carboxylate) dihydrochloride (Bpmb·2HCl) in deionized water containing drops of H2SO4resulted in the formation of a novel two-dimensional uranyl coordination polymer, namely poly[tetraoxido{μ2-1,1′-[1,4-phenylenebis(methylene)]bis(pyridin-1-ium-4-carboxylate)}di-μ3-sulfato-diuranium(VI)], [(UO2)2(SO4)2(C20H16N2O4)]n, (1). Single-crystal X-ray diffraction reveals that this coordination polymer exhibits a layered arrangement and the (UO2)2+centre is coordinated by five equatorial O atoms. The structure was further characterized by FT–IR spectroscopy, powder X-ray diffraction (PXRD) and thermogravimetric analysis (TGA). The polymer shows high thermal stability up to 696 K. Furthermore, the photoluminescence properties of (1) has also been studied, showing it to exhibit a typical uranyl fluorescence.

A new twofold interpenetrated two-dimensional cadmium(II) coordination polymer constructed from 2,2′-(benzene-1,4-dicarboxamido)dipropionate

2018 ◽  
Vol 74 (11) ◽  
pp. 1434-1439
Author(s):  
Hong-Tao Zhang ◽  
Xiao-Long Wang
Keyword(s):  
Coordination Polymer ◽  
Coordination Polymers ◽  
Self Assembly ◽  
Fluorescence Emission ◽  
Functional Materials ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Carboxylate Groups ◽  
Potential Applications

In recent years, much initial interest and enthusiasm has focused on the self-assembly of coordination polymers due to the aesthetics of their crystalline architectures and their potential applications as new functional materials. As part of an exploration of chiral coordination polymers, a new twofold interpenetrated two-dimensional (2D) coordination polymer, namely, poly[[tetraaquabis[μ3-(2R,2′R)-2,2′-(benzene-1,4-dicarboxamido)dipropionato-κ5 O,O′:O′′,O′′′:O′′]dicadmium(II)] trihydrate], {[Cd2(C14H14N2O6)2(H2O)4]·3H2O} n , has been synthesized by the reaction of Cd(CH3COO)2·2H2O with the designed ligand (2R,2′R)-2,2′-(benzene-1,4-dicarboxamido)dipropionic acid (H2 L). The compound has been structurally characterized by elemental analysis, IR spectroscopy, powder X-ray diffraction and single-crystal X-ray diffraction analysis. In the crystal structure, each CdII cation binds to three carboxylate groups from two crystallographically independent L 2− dianions. Four carboxylate groups link two crystallographically independent cadmium cations into a 4,4-connected secondary building unit (SBU). The resulting SBUs are extended into a two-dimensional folding sheet via the terephthalamide moiety of the ligand as a spacer, which can be simplified as a (4,4)-connected 4,4L15 net with the point symbol (3.53.62)(32.52.62). In the lattice, two independent folding sheets interpenetrate each other to yield a double-sheet layer. The resulting 2D layers pack in parallel arrays through intermolecular hydrogen bonds and interlayer π–π interactions. The thermal stability and photoluminescence properties of the title compound have been investigated and it exhibits an enhanced fluorescence emission and a longer lifetime compared with free H2 L.

Synthesis, Structure and Characterization of a Novel Two-Dimensional Supramolecular Mn(II) Coordination Polymer Constructed from a 1,10-Phenanthroline Derivative and a Flexible Dicarboxylate

2010 ◽  
Vol 65 (9) ◽  
pp. 1173-1176 ◽  
Author(s):  
Zhi-Guo Kong ◽  
Xiao-Yuan Ma ◽  
Zhan-Lin Xu
Keyword(s):  
Ir Spectroscopy ◽  
Glutaric Acid ◽  
Title Complex ◽  
Two Dimensional ◽  
Crystal Data ◽  
X Ray Diffraction ◽  
Triclinic Space Group ◽  
X Ray ◽  
1D Chains

The title complex, [Mn2(glu)(L)2(HL)2]・0.5H2O (H2glu = glutaric acid, HL = 2-(2-chloro-6-fluorophenyl)-1Himidazo[ 4,5-f][1,10]phenanthroline) has been synthesized using a hydrothermal method and characterized by elemental analysis, IR spectroscopy and single-crystal X-ray diffraction. Crystal data: C162H88Cl8F8Mn4N32O9, triclinic, space group P1¯, a = 14.932(5), b = 16.414(5), c = 17.891(5) Å , α = 115.851(5), β = 91.288(5), γ = 112.894(5)◦, V = 3536.4(19) Å3, Z = 1. Compound 1 exhibits 1D chains which are further stacked by C-H...π interactions to give two-dimensional supramolecular layers.

One- and two-dimensional PbII compounds resulting from reaction of PbBr2 and Pb(SCN)2 with pyrimidine-2-thione

2021 ◽  
Vol 77 (7) ◽  
Author(s):  
Vânia Denise Schwade ◽  
Bárbara Tirloni
Keyword(s):  
Structural Characterization ◽  
Diffuse Reflectance ◽  
Tautomeric Form ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
One Dimensional ◽  
X Ray ◽  
Ft Ir ◽  
Compound Ii

Pyrimidine-2-thione (HSpym) reacts with lead(II) thiocyanate and lead(II) bromide in N,N-dimethylformamide (DMF) to form poly[(μ-isothiocyanato-κ2 N:S)(μ4-pyrimidine-2-thiolato-κ6 N 1,S:S:S:S,N 3)lead(II)], [Pb(C4H3N2S)(NCS)] n or [Pb(Spym)(NCS)] n , (I), and the polymeric one-dimensional (1D) compound catena-poly[[μ4-bromido-di-μ-bromido-(μ-pyrimidine-2-thiolato-κ3 N 1,S:S)(μ-pyrimidine-2-thione-κ3 N 1,S:S)dilead(II)] N,N-dimethylformamide monosolvate], {[Pb2Br3(C4H3N2S)(C4H4N2S)]·C3H7NO} n or {[Pb2Br3(Spym)(HSpym)]·DMF} n , (IIa), respectively. Poly[μ4-bromido-di-μ3-bromido-(μ-pyrimidine-2-thiolato-κ3 N 1,S:S)(μ-pyrimidine-2-thione-κ3 N 1,S:S)dilead(II)], [Pb2Br3(C4H3N2S)(C4H4N2S)] n or [Pb2Br3(Spym)(HSpym)] n , (IIb), could be obtained as a mixture with (IIa) when using a lesser amount of solvent. In the crystal structures of the pseudohalide/halide PbII stable compounds, coordination of anionic and neutral HSpym has been observed. Both Spym− (in the thiolate tautomeric form) and NCS− ligands were responsible for the two-dimensional (2D) arrangement in (I). The Br− ligands establish the 1D polymeric arrangement in (IIa). Eight-coordinated metal centres have been observed in both compounds, when considering the Pb...S and Pb...Br interactions. Both compounds were characterized by FT–IR and diffuse reflectance spectroscopies, as well as by powder X-ray diffraction. Compound (IIa) and its desolvated version (IIb) represent the first structurally characterized PbII compounds containing neutral HSpym and anionic Spym− ligands. After a prolonged time in solution, (IIa) is converted to another compound due to complete deprotonation of HSpym. The structural characterization of (I) and (II) suggests HSpym as a good candidate for the removal of PbII ions from solutions containing thiocyanate or bromide ions.

Synthesis and Structural Characterization of a New Two-dimensional Organic-Inorganic Hybrid Molybdoarsenate: [Cu(en)2]2[(CuO6)Mo6O18(As3O3)2]

2010 ◽  
Vol 65 (2) ◽  
pp. 163-167 ◽  
Author(s):  
Qiang Wu ◽  
Qiuxia Han ◽  
Lijun Chen ◽  
Pengtao Ma ◽  
Jingyang Niu
Keyword(s):  
Thermogravimetric Analysis ◽  
Building Blocks ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
Inorganic Hybrid ◽  
X Ray ◽  
Cell Dimensions ◽  
Unit Cell Dimensions ◽  
2D Network

A new organic-inorganic hybrid molybdoarsenate constructed from a unit with two (As3O3) rings capping Anderson-type moieties, [Cu(en)2]2[(CuO6)Mo6O18(As3O3)2] (1) (en = ethylenediamine), has been hydrothermally synthesized and characterized by single-crystal X-ray diffraction and thermogravimetric analysis. The compound crystallizes monoclinically, space group P21/c, with unit cell dimensions a = 9.1541(7), b = 19.6348(14), c = 14.5205(8) Å ,β = 129.082(3)◦,V = 364.20(4) Å3, Z = 2, T = 296(2) K. Complex 1 represents the first example of a 2D network of a POM polymer where [(CuO6)Mo6O18(As3O3)2]4− building blocks are connected by complex fragments {Cu(en)2}2+.

Development of a hybrid metal-oxides (Li2O-Al2O3-Al3Fe-Al3Fe5O12) reinforced polycaprolactone composite

MRS Advances ◽  
2019 ◽  
Vol 4 (63) ◽  
pp. 3485-3493
Author(s):  
N.N. Zurita-Méndez ◽  
J. Beltran-González ◽  
G. Carbajal-De la Torre ◽  
M.A. Espinosa-Medina
Keyword(s):  
Lithium Aluminum Hydride ◽  
Polymer Network ◽  
Aluminum Hydride ◽  
Lithium Aluminum ◽  
X Ray Diffraction ◽  
X Ray ◽  
Potential Applications ◽  
Nanometric Particles ◽  
Irregular Topography

ABSTRACTThis paper addresses the chemical synthesis and characterization of a composite formed by Li2O-Al2O3-Al3Fe-Al3Fe5O12/PCL which were obtained by the process of reduction of ferric chloride (FeCl3) with lithium aluminum hydride (LiAlH4) in an open atmosphere. The goal of the development of this hybrid material was to perform a superparamagnetic material with several potential applications. The results of the characterizations by scanning electron microscopy (SEM) and vibrating sample magnetometer showed a Li2O-Al2O3-Al3Fe-Al3Fe5O12 “desert rose stone”-like morphology 3D hierarchical powders formation when particles were sintered at 850 °C. Homogeneous nanometric particles after calcination at 1100 °C were observed. X-ray diffraction analysis were performed to determine their composition. Subsequently, the superparamagnetic powders were added by dispersion in a polycaprolactone (PCL) matrix, and then, were evaluated by SEM for the observation of their morphologies. The composite material presented a polymer network with an opened structure, a well dispersion of the oxides particles into the interstices with irregular topography and reliefs.

In-plane x-ray diffraction for characterization of monolayer and few-layer transition metal dichalcogenide films

2018 ◽  
Vol 29 (5) ◽  
pp. 055706 ◽  
Author(s):  
Mikhail Chubarov ◽  
Tanushree H Choudhury ◽  
Xiaotian Zhang ◽  
Joan M Redwing
Keyword(s):  
Transition Metal ◽  
Transition Metal Dichalcogenide ◽  
X Ray Diffraction ◽  
Layer Transition ◽  
X Ray

Synthesis and Characterization of Copper-Iron Nitride Thin Films

MRS Advances ◽  
2015 ◽  
Vol 1 (3) ◽  
pp. 203-208 ◽  
Author(s):  
Hrishikesh Kamat ◽  
Xingwu Wang ◽  
James Parry ◽  
Yueling Qin ◽  
Hao Zeng
Keyword(s):  
Thin Films ◽  
Magnetic Properties ◽  
Iron Nitride ◽  
X Ray Diffraction ◽  
Copper Nitride ◽  
X Ray ◽  
Structure Morphology ◽  
Layer Stacking ◽  
Potential Applications

ABSTRACTIron nitride thin films have potential applications in the biomedicine and energy. The magnetic properties of these films can be tuned by incorporating copper nitride. In this study, iron copper nitride thin films have been fabricated by magnetron sputtering technique either by co-sputtering iron nitride and copper nitride or by layer stacking of the materials. The structure, morphology and magnetic properties of the films have been studied by scanning electron microscopy, x-ray diffraction, x-ray reflectivity and vibrating sample magnetometry.

Sign in / Sign up

Export Citation Format

Share Document