Nonlinear Analog Circuit Fault Diagnosis Based on MF-DFA Method

2010 ◽  
Vol 22 (5) ◽  
pp. 852-857 ◽  
Author(s):  
Jingyuan Tang ◽  
Yibing Shi ◽  
Wei Zhang ◽  
Longfu Zhou
2012 ◽  
Vol 263-266 ◽  
pp. 108-113 ◽  
Author(s):  
Jing Yuan Tang ◽  
Jian Ming Chen ◽  
Cai Zhang

This paper presents a fault diagnosis method for nonlinear analog circuit based on multifractal detrended fluctuation analysis (MFDFA) method. The MFDFA method is applied to analysis fault signal and extracts the multifractal features from the raw signal. The selected features are given to SVM classifier for further classification. The data required to develop the classifier are generated by simulating various faults using Pspice software. The simulation results show that the proposed method provides a robust and accurate method for nonlinear circuit fault diagnosis.


2013 ◽  
Vol 718-720 ◽  
pp. 1150-1154
Author(s):  
Ping Xu ◽  
Kai Wang ◽  
Li Geng

The Volterra series are a functional series.Its kernals both in time domain and frequency domain have definite physical significance and are independent with the system input. Thus the kernals can reflect intrinsic nature of the system. Thus the Volterra series can be used to analyze the nonlinear analog circuit.The fault feature can be extracted based on the direct analysis on the frequency response of nonlinear analog circuit so as to detect the fault in nonlinear analog circuit.


2014 ◽  
Vol 981 ◽  
pp. 11-16 ◽  
Author(s):  
Yuan Gao ◽  
Cheng Lin Yang ◽  
Shu Lin Tian

Soft fault diagnosis and tolerance are two challenging problems in analog circuit fault diagnosis. This paper proposes approaches to solve these two problems. First, a complex field modeling method and its theoretical proof are presented. This fault modeling method is applicable to both hard (open or short) and soft (parametric) faults. It is also applicable to either linear or nonlinear analog circuits. Then, the parameter tolerance is taken into consideration. A frequency selection method is proposed to maximize the difference between the faults fault signature. Hence, the aliasing problem arise from tolerance can be mitigated. The effectiveness of the proposed approaches is verified by simulated results.


Author(s):  
Jianfeng Jiang

Objective: In order to diagnose the analog circuit fault correctly, an analog circuit fault diagnosis approach on basis of wavelet-based fractal analysis and multiple kernel support vector machine (MKSVM) is presented in the paper. Methods: Time responses of the circuit under different faults are measured, and then wavelet-based fractal analysis is used to process the collected time responses for the purpose of generating features for the signals. Kernel principal component analysis (KPCA) is applied to reduce the features’ dimensionality. Afterwards, features are divided into training data and testing data. MKSVM with its multiple parameters optimized by chaos particle swarm optimization (CPSO) algorithm is utilized to construct an analog circuit fault diagnosis model based on the testing data. Results: The proposed analog diagnosis approach is revealed by a four opamp biquad high-pass filter fault diagnosis simulation. Conclusion: The approach outperforms other commonly used methods in the comparisons.


Electronics ◽  
2021 ◽  
Vol 10 (12) ◽  
pp. 1496
Author(s):  
Hao Liang ◽  
Yiman Zhu ◽  
Dongyang Zhang ◽  
Le Chang ◽  
Yuming Lu ◽  
...  

In analog circuit, the component parameters have tolerances and the fault component parameters present a wide distribution, which brings obstacle to classification diagnosis. To tackle this problem, this article proposes a soft fault diagnosis method combining the improved barnacles mating optimizer(BMO) algorithm with the support vector machine (SVM) classifier, which can achieve the minimum redundancy and maximum relevance for feature dimension reduction with fuzzy mutual information. To be concrete, first, the improved barnacles mating optimizer algorithm is used to optimize the parameters for learning and classification. We adopt six test functions that are on three data sets from the University of California, Irvine (UCI) machine learning repository to test the performance of SVM classifier with five different optimization algorithms. The results show that the SVM classifier combined with the improved barnacles mating optimizer algorithm is characterized with high accuracy in classification. Second, fuzzy mutual information, enhanced minimum redundancy, and maximum relevance principle are applied to reduce the dimension of the feature vector. Finally, a circuit experiment is carried out to verify that the proposed method can achieve fault classification effectively when the fault parameters are both fixed and distributed. The accuracy of the proposed fault diagnosis method is 92.9% when the fault parameters are distributed, which is 1.8% higher than other classifiers on average. When the fault parameters are fixed, the accuracy rate is 99.07%, which is 0.7% higher than other classifiers on average.


2014 ◽  
Vol 981 ◽  
pp. 3-10 ◽  
Author(s):  
Yuan Gao ◽  
Cheng Lin Yang ◽  
Shu Lin Tian

Soft fault diagnosis and tolerance are two challenging problems in linear analog circuit fault diagnosis. To solve these problems, a phasor analysis based fault modeling method and its theoretical proof are presented at first. Second, to form fault feature data base, the differential voltage phasor ratio (DVPR) is decomposed into real and imaginary parts. Optimal feature selection method and testability analysis method are used to determine the optimal fault feature data base. Statistical experiments prove that the proposed fault modeling method can improve the fault diagnosis robustness. Then, Multi-class support vector machine (SVM) classifiers are used for fault diagnosis. The effectiveness of the proposed approaches is verified by both simulated and experimental results.


Sign in / Sign up

Export Citation Format

Share Document